AP0-001 Practice Exam Questions and Answers

A.  

There are two fans, each with configurable speed control.

B.  

The fan module is field upgradeable.

C.  

The fan speed is automatically adjusted to the appropriate level based on the current operational status and system environment.

D.  

The fan module can move the air a total of 30 cubic feet per minute.

A.  

utility address

B.  

redundancy next hop

C.  

gateway failure message

D.  

gateway heartbeat

A.  

CPU Utilization

B.  

Error responses

C.  

Retransmissions sent

D.  

Duplicate requests

A.  

the saved configuration file has been edited, but the done command was not issued

B.  

the saved configuration file has been copied from flash into SDRAM using the save-config command

C.  

the saved configuration file has been saved into flash, but the activate-config command has not been issued

D.  

the saved configuration file was copied from flash into SDRAM using the activate-config command

A.  

reg-mode=no cache

B.  

reg-cache-mode=none

C.  

reg-mode=none

D.  

reg-cache-mode=no cache

A.  

5

B.  

2

C.  

1

D.  

10

A.  

MBCD

B.  

ACP

C.  

SIPD

D.  

APSD

A.  

Wancom0

B.  

Wancom1

C.  

Wancom2

D.  

Wancom3

A.  

a range of IP addresses used to route media flows as they egress the box

B.  

a range of IP addresses and a pool of ports Net-Net 4000 will use to declare itself as the destination for all subsequent media flows in a dialog

C.  

an IP address and range of ports the Net-Net 4000 will use to declare itself as the destination for media flows in a session

D.  

an IP address and port the Net-Net 4000 uses for steering media to the external media server

A.  

When the status LED, which is located on the front of the chassis control panel is lit yellow, it is an indication that the Net-Net system is experiencing a major malfunction such as a power supply failure.

B.  

You can have up to two simultaneous console connections.

C.  

By default, you can only Telnet to the wancom0 interface on the Net-Net 4000.

D.  

By default, the Net-Net 4000 media interfaces will respond to PIN

G.