CCNP Routing and Switching Portable Command Guide: Configuration of Redistribution
- Defining Seed and Default Metrics
- Redistributing Connected Networks
- Redistributing Static Routes
- Redistributing Subnets into OSPF
- Assigning E1 or E2 Routes in OSPF
- Redistributing OSPF Internal and External Routes
- Configuration Example: Route Redistribution for IPv4
- Configuration Example: Route Redistribution for IPv6
- Verifying Route Redistribution
- Route Filtering Using the distribute-list Command
- Route Filtering Using Prefix Lists
- Using Route Maps with Route Redistribution
- Manipulating Redistribution Using Route Tagging
- Changing Administrative Distance for Internal and External Routes
- Passive Interfaces
This chapter provides information about the following redistribution topics:
- Defining seed and default metrics
- Redistributing connected networks
- Redistributing static routes
- Redistributing subnets into OSPF
- Assigning E1 or E2 routes in OSPF
- Redistributing OSPF internal and external routes
- Configuration example: route redistribution for IPv4
- Configuration example: route redistribution for IPv6
- Verifying route redistribution
Route filtering using the distribute-list command
- Configuration example: inbound and outbound distribute list route filters
- Configuration example: controlling redistribution with outbound distribute lists
- Verifying route filters
Route filtering using prefix lists
- Configuration example: using a distribute list that references a prefix list to control redistribution
- Verifying prefix lists
Using route maps with route redistribution
- Configuration example: route maps
- Manipulating redistribution using route tagging
- Changing administrative distance for internal and external routes
- Passive interfaces
Defining Seed and Default Metrics
Router(config)#router eigrp 100 |
Starts the EIGRP routing process. |
Router(config-router)#network 172.16.0.0 |
Specifies which network to advertise in EIGRP. |
Router(config-router)#redistribute rip |
Redistributes routes learned from RIP into EIGRP. |
Router(config-router)#default-metric 1000 100 250 1 1500 Or |
The metrics assigned to these learned routes will be calculated using the following components: |
Router(config-router)#redistribute rip metric 1000 100 250 1 1500 |
1000 = Bandwidth in Kbps |
100 = Delay in tens of microseconds |
|
255 = Reliability out of 255 |
|
1 = Load out of 255 |
|
1500 = Maximum transmission unit (MTU) size |
|
The metric keyword in the second option assigns a starting EIGRP metric that is calculated using the following components: 1000, 100, 255, 1 1500. |