Pass Your Cisco 300-208 Exam Easy!

Ralph is not 100% valid.
I failed yesterday with 681/1000 and got 15 questions which are not in this file, i.e. when did the ISE purge something.

Is this dump valid?

Not valid

Does anyone has pdf version of this dump ?
cause i need it very urgently

300-208.examcollection.premium.exam.174q still valid
Passed with 9xx.

Ralph.170q is still valid.
Passed 300.208 with 9xx.

It's Still Valid Passed Today with 947
I Saw only one question that wasnt in this file

Good Luck Guys

Can anybody else confirms if 174q dump is still valid as I am sitting for the exam soon?
Thanks

Hi all,
I have just finshed passed the exact today just now.
I have new question who are not in this dump.
Two simulation questions
Number of questions: 57
Passing Score: 846
My Score: 948
Vadilidy: 97 %

Hi all
Latest actualtests is valid , I passed the exam yesterday

57 Q 1 DD , 2 SIM

Wrote 300-208 exam few days ago and passed with 960/1000 scores. Main topics of the exam according to my real exam: 1. Identity management and secure access; 2. Troubleshoot, report, and monitor the tools; 3. Threat defense; 4. Architectures of threat defense; 5. Designing identity management architectures. Got 57 questions in the exam and learned them from itexamfox 300-208 dumps (194q).

Can anyone please confirm if this dump or 174Q premium are still valid? I will be very thankful to you

Exam not valid I failed 835/846 there are some now Q

I think there are a little problem of this dump regarding to the question

Exam A
Q22
Refer to the exhibit
asa1(config)# time-range WeekendHours
asa1(config-time-range)# periodic friday 18:00 to monday 8:00
asa1(config)# access-list Outside extended deny ip any object-group vpnservers time-range WeekendHours

log
asa1(config)# access-group Outside in outside

If the given configuration is applied to the object-group vpnservers, during which time period are external

users able to connect ?
A - From Monday at 8:01 a.m until Friday at 5:59 p.m
B - From Friday at 6:01 p.m until Monday at 8:01 a.m
C - From Friday at 6:00 p.m until Monday at 8:00 a.m
D - From Monday at 8:00 a.m until Friday at 6:00 p.m

In this dump the exact answer is C.
But due to the type of permission "deny" in the "Outside" access-list, I think that the good answer is A.
I very sure that those who try this question in lab simulation can approve it.

Is this dump still valid??

This dump is still valid but there are some question as i think one or 2 added on exam.
i pass with 960/1000

Anyone update the status ? The dumps still valid or not?

passed the exam yesterday with 1000/1000 dump still valid

170q ralph Valid ... passed yesterday with out of out score

from pakistan passed today 18/10/2015 170 q are still valid

Hi Jim

The exam was from Ralph.

1 DD, 2 LABs, 4 MCQs (Topolgy)

If you know how to use ISE then the labs and MCQs (Topology) will be easy for you.

Regards

Valid 100% in Egypt, some mistakes in simulations.

Hi Yousuf, thanks for your response, can you tell how was your exam?

Thank you in advance!
Jim

Bob

Thanks mate for your consideration.

I have passed the exam today.

Ralph dump is valid.

1 DD, 2 LABs, 4 MCQs (Topolgy)

Regards

@yousuf please share me your e-mail.

Hello

Is this dump still valid?

Kindly let me know because tomorrow (15th October) is my test day.

Regards

Is this dump valid? Has anyone passed it in the last days? Thanks

Hello Jim

I am sure that the following configuration will already be done (No need to write the following commands):

Int Fastethernet 0/19
description Employee PC
Switchport access VLAN 9
Switchport mode access
IP access-group Basic-ACL in
Authentication host-mode multi-auth
Authentication open
Authentication port-control auto
Authentication periodic
Authentication timer reauthenticate server
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast

What we have to do is to configure the following:

conf t
interface fa 0/19
mab
authentication order mab dot1x
authentication priority dot1x mab
shut
no shut
end

Still valid... 9xx

Hello Dear

How to check the Authentication succeeded, Authentication failed on ISE.

I means where to click (which options to click to check these authentications).

Kindly help me.

Regards

I have the same question as Jim.

(1) We have to configure the following or the following configuration will already be done.

Int Fastethernet 0/19
description Employee PC
Switchport access VLAN 9
Switchport mode access
IP access-group Basic-ACL in
Authentication host-mode multi-auth
Authentication open
Authentication port-control auto
Authentication periodic
Authentication timer reauthenticate server
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast

(2) We have to configure the following only?

conf t
interface fa 0/19
mab
authentication order mab dot1x
authentication priority dot1x mab
shut
no shut
end

(3) OR We have to configure the following only

conf t
interface fa 0/19
mab
shut
no shut
end

Can someone please email me valid CCNP SISAS dumps at hussaintalha@hotmail.com.

people! I have a question... is this config already in the exam lab?
Int Fastethernet 0/19
description Employee PC
Switchport access VLAN 9
Switchport mode access
IP access-group Basic-ACL in
Authentication host-mode multi-auth
Authentication open
Authentication port-control auto
Authentication periodic
Authentication timer reauthenticate server
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
----------------------------

I have only to configurate this?

conf t
interface fa 0/19
mab
authentication order mab dot1x
authentication priority dot1x mab
shut
no shut
end
show authentication sessions int fa 0/19
copy running-conf startup-config
-------------------------------

Please I need your help! Thank you in advance!

please any one who can help in 300-208 exam labs

This dump still valid, I was passed the exam to day.

Took the exam yesterday passed it with a 900 this dump is valid. Thank you Ralph!

Dump valid. Pass today.

Took today and passed with 947/1000 :)
174 dump is still valid. One thing for mab sim, after shut and no shut int fa0/19, the interface is only UP for a few seconds and after that both line and protocol ar down. When check with show authentication session int fa0/19, I see that mab is successfully authenticated.

Legit 9xx 9/27/2015. To add to the tips, one thing you must remember is on the AD1 one is to also modify IT_Users. In the sim, it is the very last step and isn't shown in the VCE. I think it says, modigy IT_User Auth policy to use Machine or something. One thing is that order should be authentication order dot1x mab to force it to go through dot1x. Not a perfect score but I went through and noticed I missed three questions that align with my scores. The configs where 100 (when you get your score report to see where you were week)

Passed the exam today with score 9xx. Dump is still valid.

clered with 1000/1000

170 is a good one with a couple of errors in the labs and maybe for access hours acl question

in the labs the question abuot the dot1x auth for user is
The IT_Corp authorization profile were applied.and not the one regarding the authorization policy

and the lab about the switch conf requires:

conf t
interface fa 0/19
mab
authentication order mab dot1x
authentication priority dot1x mab
shut
no shut
end
show authentication sessions int fa 0/19
copy running-conf startup-config

(last line to check as required in the lab)

Dump is 100% valid.

Dump Valid i Pass it 16/9/2015

I will be sitting for this test 9/20/2015. The repeating questions have slight wording changes in them. Regardless, I believe in Wholehawg and I have been going through them using other study tools like the book and training videos. We will see.

Why is here so many repeating questions? At least 20%.

Hi, All,
Is there any Lab Simulation sites for practice prior to take an exam. Your invaluable advise would be much appreciated. Thanks

Hi, All,
Is there any Lab Simulation sites for practice prior to take an exam. Your invaluable advise would be much appreciated. Thanks

@ Wholehawg -
When the MAC authentication bypass feature is enabled on an 802.1x port, the switch uses the MAC
address as the client identity. The authentication server has a database of client MAC addresses that are
allowed network access. After detecting a client on an 802.1x port, the switch waits for an Ethernet
packet from the client. The switch sends the authentication server a RADIUS-access/request frame with
a username and password based on the MAC address. If authorization succeeds, the switch grants the
client access to the network. If authorization fails, the switch assigns the port to the guest VLAN if one
is configured.
If an EAPOL packet is detected on the interface during the lifetime of the link, the switch determines
that the device connected to that interface is an 802.1x-capable supplicant and uses 802.1x
authentication (not MAC authentication bypass) to authorize the interface. EAPOL history is cleared if
the interface link status goes down.

conf t
interface fa 0/19
authentication port-control auto
mab
end
copy running-conf startup-conf

The lab already says that 802.1x works and if you look all of the needed features of AAA is already done. If you do authentication order mab dot1x, you will force mab first and the dot1x will not go through. Leave that one auto and it will perform dot1x first. If it fails, then there is a timeout set to re-authenticate in 10 minutes. Don't believe me - confirm it with Configure IEEE 802.1x Port-Based Authentication PDF ("Security Software Configuration Guide or Cisco IE 2000U and Connected Grid Switches")

Took the test today using this dump. I only saw 1 question that was not in this dump. passed with a 935. This one IS valid as of 8/27/15. Test was 57 question, 1 D&D, 2 Labs Note the switch Lab in this dump may be incomplete. I think you need to add "authentication order mab dot1x" as well.

Dump still valid?

can anyone please confirm if this exam is still valid

Latest ActualTest Dump; 100 % valid