Pass Your Cisco 300-320 Exam Easy!

Hi Guys,
can some please advise where to get122 dump + 21Q + 6Q

regards

perfect !!
this dump still vaild
pass 949 8/7

is 147 Questions still valid?

4/Aug 2016, passed today with 936
147 dump (122 + 28) is valid

K.Ohm and all guys,
i have an Cisco.300-320.v5.examcollection.premium.exam and i am not sure this dump is correct. So could u please confirm for this?

Pass 02AUG2016 score 923, 122+28Q still valid

I don't understand.... When I can find and download valid dump?

I have passed the exam today with score 923, the 147 questions dumps is 100% Valid.

passed today, 122Q+28Q still valid. thanks for the valuable comments below.
21. Which option is correct when using Virtual Switching System?
i believe this is the answer: one control plane active, one control plane standby.
in a sense both data plane is forwarding which is correct but maybe because of the wording. if its stated as "data plane is combined in forwarding" that one should be another option. the exam heavily takes statements on cisco docs.

Passed today. 122+28q valid.

For the VSS question I answered both data planes forward traffic simulataneously - this made more sense to me

Hi All,
Can anyone confirm the differences between Cisco.ActualTests.300-320.v2016-06-06.by.Tezeos.132q.vce & the 147Q premium file?
I can't seem to pay online due to card verification troubles, would the 132Q + 28Q be enough?
Thanks

7/25 standard 122+28 still valid thank you all!!!

are there any labs in the exam?

Passed today. 122+28 still valid..

147 questions from dump + 28 questions in comments valid. Passed today.

I have the same question as K..

Passed on the 22nd. Still valid. All questions from 147 on test. 147 does have most of the 28 just re-worded. India, you will need CCDA to get certified.

Any recent takers here like today/Friday? Planning to sit an examn early next week.

Is the 147q dump valid ? Does it also include the 28 questions in comments?

If I pass this exam then will I be called CCDP certified(route,switch,Arch) if I have already done CCNP(route,switch,tshoot) previously ?

Passed today with 961. The dumps is valid..

Here is my preparation materials

1)https://ondemandelearning.cisco.com/cisco/ccdp-arch#/introhttps://learningnetworkstore.cisco.com/ccdp/designing-cisco-network-service-architectures-arch-v3-0-elt-arch-v3-0-019091

2)https://learningnqetwork.cisco.com/community/learning_center/practical-network-design-fundamentals

3)Designing Cisco Network Service Architectures

For exam perspective

Used 122 & 28Q

In 122Q, dump answer is B. But before NAC remedies the problem, NAC blocks the client first from accessing network resources. So I think the answer here should be A. What are your thoughts?

What is the next action taken by the Cisco NAC Appliance after it identifies vulnerability on a client device?
a. denies the client network resource access
b. repairs the affected devices
c. generates a Syslog message
d. permits the client but limits to guest access

I Passed today on 20th July, 2016 with 910 points. 122Q+28Q still valid.

From where can I download the valid 122q dumps ?

Passed exam today!!!
122Q & 28Q 100% valid!

@NB,
there were 122q in the last version of Premium. The new version of Premium contains 147q (122+new q)

@Hellboy

Rapid PVST+ Port State Overview

Each LAN port on a software using Rapid PVST+ or MST exists in one of the following four states:

Blocking—The LAN port does not participate in frame forwarding.
Learning—The LAN port prepares to participate in frame forwarding.
Forwarding—The LAN port forwards frames.
Disabled—The LAN port does not participate in STP and is not forwarding frames.

Passed today 17-07-2016
122Q + 28Q Still valid..
Dear friends..Thank you for valuable comments ..

Hello all!
Could someone help me? Can someone tell me where is 122Q? The 28Q is in this page but i cannot find the 122Q!
Many Thanks.

Hi! Where´s the 122Q dump?

Yes thts correct Snow

About this question in 122Q. it may seem obvious that it is under Layer 3 right but the answer for this one should be Layer 2

In which OSI layer does IS-IS operate?

A.
Layer 1
B.
Layer 2 (answer)
C.
Layer 3
D.
Layer 4

I passed today . 961/1000.

122Q and 28q ok

YES! I Passed today 12/07/2016 964/1000. I used only 122Q + 28Q(from comments). Just relax and go for the exam.

Friends,when i downloaded premium file only 122q then now its 147,,whats the new questions ?please help me..

Studied 122q plus the ones in this discussion (so called 28q) and passed with ~930 score. Took the exam on Saturday- quick and painless.

@hellboy

The answer has to be RPVST+

How Can I get 28q questions?

Passed today with 122q Premium + 28q thank you for all guys

My 2 cents.
About question 14.
The correct answer should be both data planes forward traffic.
control plane is learning what we will do. Just like planning
In VSS, control plane are not combined actually. Only one of the virtual switch members has the active control plane
Q 14. Which option is correct when using Virtual Switching System?
- Both control planes forward traffic simultaneously (majority answer)
- Control Planes are combined into one virtual control plane" (dumps answer)
- Both the data planes forwards traffic simultaneously.

Q2, Q24,
Rapid Spanning Tree port states are:
discarding
learning
forwarding

no listening and blocking, so shouldn't rpvst+ be the correct answer?

What is the 28q and where can i find it. Thanks

I passed on 02 july in UK and its still valid. Please do not forget to do 28Q as I got most of them from it as well.

Thanks

Hi,

Could you please give me a hand? Where can i find the mentioned 122+28q?
Thank you!

Planning to take exam by next week. Is 122+28 is stilk valid?

I see only two vce files..can someone confirm what file you referred to for exam?one has only 52 que!

Passed today. Still valid. Most of the questions are from the new 28q

Passed today. 936/1000
File still valid, but you have to learn the 28q from here.

My feeling was also to have 15-20q from the 28q

The possible answers for this question were a bit different. It was something like this (as far as I remember):
Q 14. Which option is correct when using Virtual Switching System?
- Both control planes forward traffic simultaneously
- Both the data planes forwards traffic simultaneously.
- One control plane is active, the other is standby
- One data plane is active, the other is standby

HTH

122Q + 28Q are still valid in US. From the 28q, I had between 18-20 questions. Also, many of the answers are in different order. Exam is 65 questions and time available is 75 minutes. 860 is needed to pass.Thanks

122q and plus 28q still Valid! . Done today, passed 949

Passed yesterday. 122q and 28q are valid. Thank you everyone for your contribution.

Passed yesterday with 936. 122 + 28 Q are still valid. Special thanks for Karim for sharing new questions.

JOE: the 28 questions can be found in the comments... please have a look next time There. (no practise, only theoretical!)

Hello Guys, Please were can I get the 28Q practice questions. I have the premium but I need the 28Q practice questions. Thanks.

Hi Guys

Passed today in the UK date 18/6/16, with 949/1000, Passing is 860 with 75 minutes duration.

122 plus 28 are still valid. Thanks Karim, Sam, Spartan and Dreed for putting these questions together for us.

Good luck everyone.

Do i need to buy the vce simulator even when i buy the premium file? i'd like to get a pdf...

PLease let me know the link to download 122Q and 28Q. Please brief me. I have tezeos 132Q. where can i dowload 122Q

Passed today with 961. 122 + 28 Q are still valid. :)

Passed today with 961 Marks 122 + 28 Q are still valid. Thank U all :)

Passed today with 960 Marks 122 + 28 Q are still valid.

Thanks Exam collection Team

122q+28q are valid.
get 936 pass

I think there were some wrong answers in the 122Q.

Examcollection owner will not allow to copy the link. They insist you to buy it.

I passed the exam today.
I had few new questions.
Dump is valid but some answers are not correct

Thanks Karim, Can someone share me the link for 122 Q

Hi Guys, Cleared exam yesterday. 122q+28q are valid. And looks like few answers are wrong on these questions. but still go with the answers you get below. I cleared with 961 points.

Hi guys,
I took the exam today and passed with 949.
All the questions were on the premium VCE and the 26 questions posted on your comments.
Not sure which questions are wrong as I answered exactly as the dump.
No new questions.

@Martin, Congratulations! What 3 Questions and Answers do you think are wrong on the 28 Questions posted below?

Dear,
My 2 cents;

Q2: Rapid spanning Tree doesn't have a "blocking" mode but "discarding" mode which is similar but the name of the state is different. More info https://en.wikipedia.org/wiki/Spanning_Tree_Protocol#Rapid_Spanning_Tree_Protocol

@dreed and Karim,

Thank u so much guys! I'm planning to take this exam sometime next week.

@ M. Osman,
Were you able to take the exam last June. 10th? How was it?

Dear,
My 2 cents;

Q2: Rapid spanning Tree doesn't have a "blocking" mode but "discarding" mode which is similar but the name of the state is different. More info https://en.wikipedia.org/wiki/Spanning_Tree_Protocol#Rapid_Spanning_Tree_Protocol

OSMAN & KARIM, Please update us the exam status once you are done.

Hi!
I've taken the exam on 8th. Pass 950. All questions only from 122q premium dump and 28q - from the comments.
Some answers from "data center" part must be wrong because I remeber all answers put in exam and final score was decrease -50 (it means at least 3 anserws wrong). Generally all questions mentioned here and in 122 premmium dump were on exam. No need to study anything else. Good luck guys!

Please let me know this dump is valid or what is the new file which is valid

Hi Guys,

I will take exam tomorrow 10th June 2016.

I will update you guys accordingly.

Regards,

M. Osman

@Dreed, thank you so much for your reply !!!

@All, here is all the new questions(21 by Sam-india , and 6 by Spartan17-Greece, 1 question by dreed-saudi arabia)
please give suggestions if any answer you thing is incorrect for the below questions. your feedback is highly apprecieated.

@dESING-Serbia, these 122 question is the premium file, plus prepare the below 28 new questions reported so far.

i will write my exam on June,13 and will update you accordingly...

thank you!!!

Q1 Drag the IS-IS fast convergence components to the order they occur.
First - Failure detection time
Second - Event propagation time
Third - SFP run time (small form-factor pluggable)
Fourth - RIB FIB update time

Q2. Which technology provides a layer 2 loop free and does not contain a port state named "Blocking"
- RPVST+
- VSS(correct)
Q3. Which L2 messaging protocol maintains VLAN configuration consistency
- VTP
Q4. OTV relies on which underlying protocol?
- IS-IS
Q5: Which two methods are available to connect a Cisco IOS device to an active directory domain for authentication?
- LDAP (Lightweight Directory Access Protocol)
- Radius
Q6. What are two point-to-multipoint overlay tunneling strategies that are used in transitioning to IPv6 (choose two)
- ISATAP (Intra Site Automatic Tunneling Address Protocol)
- 6to4
Q7. Which two BGP attributes can be set with outbound policy to manipulate inbound traffic, if honored by the remote
Autonomous system (choose two)
- Multi-exit discriminator (MED)
- AS path
Q8. Which STP feature can prevent other switches on the network from becoming the root switch, but still allow that interface to participate in STP otherwise?
- Root Guard
Q9.A network engineer designing an access layer that requires all uplinks to be active, furthermore, VLANs must span across the entire switch block. Which two design fulfill this requirement?
- Layer 2 loop-free inverted U
- Layer 2 loop square
Q 10. Port Security supports which type of port
- NoNegotiation trunk port 802.1Q
Answer: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SX/configuration/guide/book/port_sec.html
Q 11. In which multicast configuration is MSDP most useful?
- Interdomain IPv4 PIM sparse-Mode
Q 12. Which protocol should be configure if a network administrator has the following requirement
- GLBP
Q 13. Which three statements about 802.1X are true?
- It is IEEE standard
- It can allow and deny port access based on device identity
- It can allow and deny port access based on user identity
Q 14. Which option is correct when using Virtual Switching System?
- Both control planes forward traffic simultaneously (majority answer)
- Control Planes are combined into one virtual control plane" (dumps answer)
- Both the data planes forwards traffic simultaneously.
Q 15. Which security Mechanism can you implement to protect the OSPF?
- Cryptographic authentication
Q 16. Which virtualization technology uses Layer 3 BFD to detect network failure between Network Devices?
- Cisco Fabric path
Q 17. Which interface characteristic is used to calculate cost of an interface in OSPF?
- Bandwidth
Q 18.Which STP feature allows an access port to bypass the learning and listening?
- Port Fast
Q 19.In what situation must spanning-tree be implemented?
- When redundant Layer 2 links, that are not part of a single Ether Channel or bundle, exist between distribution switches
Q 20. Which OSPF concept is used to relate areas to the backbone area through another area A.?
- Virtual Links
Q 21. You are given the 192.168.2.0/24 network and you should divide it in 4 subnets. Which statements are true regarding the first subnet?
a. 62 hosts in subnet
b. 255.255.255.192 mask
c. 192.168.2.62 last host
Q 22. With which technology can VSS be combined to achieve better performance?
A. MEC (Multi-chassis Ether channel)
Q 23. Explain to a customer 2 advantages of the routing summarization.
a. small routing table
b. small upstream impact of a flapping interface
Q 24. Which technology guarantees loop free network and does not contain the state "listening"?
a. RPVST+
b. STP
c. VSS (correct)
Q 25.Which protocol does VPLS use to tunnel layer 2 Ethernet frames?
a. l2tp
b.MPLS (Majority answer)
Q 26. You need to design a network with a summary segment that supports up to 15 IP segments and all segments must be /24
a. /20 (right choice)
b. /21
c. /18
d. /19

Q. 27. What are your VSS recommendations? Something like this.
Answer: Do not configure switch preemption

Q. 28. If there are STP and FHRP running together, what is your recommendations?
Answer: STP Root should be configured on the same device where FHRP is the Primary.

@neo, @karim
Q 1. Drag the IS-IS fast convergence components to the order they occur. is it correct order.
Answer:
First - Failure detection time
Second - Event propagation time
Third - SFP run time
Fourth - RIB FIB update time


Q 2. Port Security supports which type of port?
a. IEEE 802.1Q tunnel port
b. NoNegotiation trunk port 802.1Q (???)
Answer: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SX/configuration/guide/book/port_sec.html

Q 3. Which technology provides a layer 2 loop free and does not contain a port state named "Blocking"
a. RPVST+ (Spanning tree - listening and blocking)
b. VSS (Correct)

Q 4. A network engineer designing an access layer that requires all up-links to be active, furthermore, VLANs must span across the entire switch block. Which two design fulfill this requirement?
a. Layer 2 Star
b. Layer 2 loop-free inverted U
c. Layer 2 loop square
Answer: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DC_Infra2_5/DCInfra_6.html

Q 5. Which three statements about 802.1X are true?
a. It is IEEE standard
b. It can allow and deny port access based on device identity
c. It works only with wired devices
d. It can allow and deny port access based on user identity
Answer: abd (802.1X support wired and wireless for authentication)


Q 6. Which option is correct when using Virtual Switching System?
a. Both control planes forward traffic simultaneously
b. Both the data planes forward traffic simultaneously

Answer: (control plane handles hardware components whereas the data place handles software part which includes forwarding traffic)

Q 7. Which technology guarantees loop free network and does not contain the state "listening"?
a. RPVST+ (listiening and blocking)
b. STP (listening and blocking)
c. VSS (correct)

Q 8. Which protocol does VPLS use to tunnel layer 2 Ethernet frames?
a. l2tp
b. MPLS
Answer: B (VPLS over MPLS, VPLS is a layer 2 Multipoint and L2TP is a point-to-point tunneling)

Never mind I bought it!

and is the 122q dump still valid?

Does anyone from Greece know if I can buy the premium VCE file because we have a problem with capital controls here it we could buy some stuff and im sure if I could buy this?? please tell me?=!

Passed today. Kindly refer to the 122q and 26q given above. Thanks everyone for sharing this information.

Passed exam today!!! Please go for the premium files and the 26 questions given above.. Thanks everyone for sharing the updates..

Can somebody please comment for the correct answers on 8 new questions posted below by Karim on this thread? Thank you very much!

Can someone tell me how many questions are in this 122Q dump ?
I have a pdf file with this file name:Cisco.ActualTests.300-320.v2015-12-16.by.Helen.52q.vce
and it has 52 question.
Is this the same dump, or there is another one that you are refering to.

Thanks

Please help me in finding the correct answers for the below questions??
Thanks.

Q 1. Drag the IS-IS fast convergence components to the order they occur. is it correct order ?
First - Failure detection time
Second - Event propagation time
Third - SFP run time
Fourth - RIB FIB update time

Q 2. Port Security supports which type of port?
a. IEEE 802.1Q tunnel port (???)
b. NoNegotiation trunk port 802.1Q (???)


Q 3. Which technology provides a layer 2 loop free and does not contain a port state named "Blocking"
a. RPVST+
b. VSS

Q 4. A network engineer designing an access layer that requires all up-links to be active, furthermore, VLANs must span across the entire switch block. Which two design fulfill this requirement?
a. Layer 2 Flex Links
b. Layer 2 loop-free inverted U
c. Layer 2 loop square

Q 5. Which three statements about 802.1X are true?
a. It is IEEE standard
b. It can allow and deny port access based on device identity
c. It works only with wired devices (???)
d. It can allow and deny port access based on user identity (???)

Q 6. Which option is correct when using Virtual Switching System?
a. Both control planes forward traffic simultaneously
b. Both the data planes forward traffic simultaneously

Q 7. Which technology guarantees loop free network and does not contain the state "listening"?
a. RPVST+
b. STP
c. VSS

Q 8. Which protocol does VPLS use to tunnel layer 2 Ethernet frames?
a. l2tp
b. MPLS

@ Mark

122 are premium dumps file, and these 21 and 6 questions are mentioned in the comments below. these are some new questions.

Dear friends... Need real suggestion.. Please assist.. This may be a repeated question but please help.. It may help new people like me...
1. Is "300-320 Premium VCE File" and "Cisco.ActualTests.300-320.v2015-12-16.by.Helen.52q.vce" file same? (Just paid and got a file from actual test site, which has 122 q)
2. 22Q - posted by sam & 6Q - posted by Spartan17, are those we are taking about? Pls help
Thanks
PS Sorry for my poor English

Passed today, 974/1000. Dump 122Q + 21Q + 6Q are still valid. (1 New Question).
My 1 new question was, something like "If there are STP + FHRP running together, what is a recommendation/must?" (I do not remember exactly...)
My answer was like "STP Root should be configured on the same device where FHRP is the primary".
Another answer was similar what you guys are mentioning below regarding VSS: "Do not configure preemtion", but i did not choose that one.
Good luck!

I am going to take exam tomorrow please guide me i have actual test 122 question
any other material require for this exam

other 26 question which is in this website is true ? or not

Passed today. Dump 122Q + 21Q + 6Q are still valid. (1 New Question).

passed 860. so close...122 + 21 + 6 and new 1 or 2 question..but you need right answers about 21+6 question..good luck.

122q stiil valid...passed !!!

what version player do i need for this

I passed the exam earlier this week with 900+.
premium file still valid plus the questions mentioned in the comments.

yes Mr. Dreed is right i got a question like this about VSS recommendations. and i also answered the same

Answer: Do not configure switch preemption

One new question i rememder is regarding the VSS recommendations.
Answer: Do not configure switch preemption

Hi, I already have the 122Q premium. where is the 21Q + 6Q? Please share thanks.

Alhamdullah,Passed 1 hour ago with 898, i got 65 Question
The 122 dump + 21Q + 6Q still valid plus i got two new questions
my advice to you guys is focus on the 21 + 6Q well, i got all of them in the exam i guess,
study well,,
thanks for everybody who added a post in this website, your comments really helps us a lot

& good luck guys ^_^

Please add the 6Q

pass today 949
dump 122Q + 21Q + 6Q (in dump 36Q + 21Q +6Q + new 2 Question = total 65Q)

{have 3 Drag&Drop IS-IS , NAT&Overlap , Access-Distribution }

Dump 122questions + 21+6 q are still valid pass today with 885

today passed exam, all question from 121 dump + 21 Question + 6 Question , you need make sure specially 21+6 questions are correct answer that's it

Is the 122 Questions dump is still valid ?

what book to study or any other study material???? please!!

Passed with 900+/1000 Score with 122Q premium vce+21q+6q listed here

Hey guy, Were is "20 Questions from blog"? Please confirm to me..There is many information..

The premium file is valid?

Hi,
5.Which protocol does vpls use to tunnel
layer 2 ethernet frames?
a.chose l2tp
b.mpls

==============
I believe this should be MPLS...
VPLS use MPLS for tunneling
L2TP is another variant of L2 tunneling

To summarize, there are more then 21Q. I've counted 26, but not everywhere right answers...
Q1 Drag the IS-IS fast convergence components to the order they occur.

First - Failure detection time
Second - Event propagation time
Third - SFP run time
Fourth - RIB FIB update time

Q2. Which technology provides a layer 2 loop free and does not contain a port state named "Blocking"
- RPVST+

Q3. Which L2 messaging protocol maintains VLAN configuration consistency
- VTP

Q4.OTV relies on which underlying protocol?
- IS-IS

Q5: Which two methods are available to connect a Cisco IOS device to an active directory domain for authentication?
- LDAP (Lightweight Directory Access Protocol)
- Radius

Q6. What are two point-to-multipoint overlay tunneling strategies that are used in transitioning to IPv6 (choose two)
- ISATAP
- 6to4

Q7. Which two BGP attributes can be set with outbound policy to manipulate inbound traffic, if honored by the remote
Autonomous system (choose two)
- Multi-exit discriminator (MED)
- AS path

Q8. Which STP feature can prevent other switches on the network from becoming the root switch, but still allow that interface to participate in STP otherwise?
- Root Guard

Q9.A network engineer designing an access layer that requires all uplinks to be active, furthermore, VLANs must span across the entire switch block. Which two design fulfill this requirement?
- Layer 2 Flex Links (???)
- Layer 2 loop-free inverted U
- Layer 2 loop square

Q 10. Port Security supports which type of port
- IEEE 802.1Q tunnel port ( ???)
- NoNegotiation trunk port 802.1Q ( ???)

Q 11. In which multicast configuration is MSDP most useful?
- Interdomain IPv4 PIM sparse-Mode

Q 12. Which protocol should be configure if a network administrator has the following requirement
- GLBP

Q 13. Which three statements about 802.1X are true
- It is IEEE standard
- It can allow and deny port access based on device identity
- It works only with wired devices (???)
- It can allow and deny port access based on user identity (???)

Q 14. Which option is correct when using Virtual Switching System
- Both control planes forward traffic simultaneously

Q 15. Which security Mechanism can you implement to protect the OSPF?
- Cryptographic authentication

Q 16. Which virtualization technology uses Layer 3 BFD to detect network failure between Network devices
- Cisco Fabric path

Q 17. Which interface characteristic is used to calculate cost of an interface in OSPF
- Bandwidth

Q 18.Which STP feature allows an access port to bypass the learning and listening?
- Port Fast

Q 19.In what situation must spanning-tree be implemented?
- When redundant Layer 2 links, that are not part of a single Ether Channel or bundle, exist between distribution switches

Q 20. Which OSPF concept is used to relate areas to the backbone area through another area
A. Virtual Links

Q 21. You are given the 192.168.2.0/24 network and you should divide it in 4 subnets. Which statements are true regarding the first subnet?
a.62 hosts in subnet
b.255.255.255.192 mask
c.192.168.2.62 last host

Q 22. With which technology can VSS be combined to achieve better performance?
A. MEC (Multichassis Etherchannel)

Q 23. Explain to a customer 2 advantages of the routing summarization.
a. small routing table
b. small upstream impact of a flapping interface

Q 24. Which technology guarantees loop free network and does not contain the state
"listening"?
a. RPVST+ (??)
b. STP (??)
c. VSS (??)

Q 25.Which protocol does VPLS use to tunnel layer 2 ethernet frames?
a. l2tp

Q 26. You need to design a network with a summary segment that supports up to 15 IP segments and all segments must be /24
a./20 (right choice)
b./21
c./18
d./19

Can you please share the 122q + 21 new questions please?

Thanks

Today i clear my exam. thanks for comments given

Passed. New questions:
1. You are given the 192.168.2.0/24 network and yoy should divide it in 4 subnets.Which statements are true regarding the first subnet?
a.62 hosts in subnet
b.255.255.255.192 mask
c.192.168.2.62 last host
2.With which technology can vss be
combined to achieve better performance?
chose mec
3.Explain to a customer 2 advantages of
the routing summarization.
a. small routing table
b. small upstream impact of a flapping
interface
4. Which technology guarantees loop free
network and does not contain the state
"listening"?
a. RPVST+
b. stp
c. vss (my choice)
5.Which protocol does vpls use to tunnel
layer 2 ethernet frames?
a.chose l2tp
b.mpls
6.You need to design a network with a summary segment that supports up to 15 ip segments and all segments must be /24
a./20 (my choice)
b./21
c./18
d./19
and another one which I cannot remember. 122 dump is valid + 21 questions + corrections from Mike. Thank you all guys!!!

Pls someone give me link of 122 queations dump....i have to give exam on monday

Passed today 12 with 923, 122q and 21 are valid but there is new question regarding ;
Q: Which OSPF concept is used to relate areas to the backbone area through another area
A; Virtual Links
Good Luck

Passed today(11 may 2016). All questions from 122q + extra 21q

Is dump still valid, has anyone taken the exam recently?

Is the 122 Questions dump is still valid ?

Passed today 949/1000. Premium dump 122q + 21q below are valid. Some of the answers are wrong. Here are my suggestions.

Which technology provides a layer 2 loop free and does not contain a port state named "Blocking"
RPVST+

OTV relies on which underlying protocol?
IS-IS

Which STP feature can prevent other switches on the network from becoming the root switch, but still allow that interface to participate in STP otherwise?
Root Guard

Which option is correct when using Virtual Switching System?
Both data planes forward traffic simultaneously

Which three statements about 802.1X are true?
It is IEEE standard
It can allow and deny port access based on device identity
It can allow and deny port access based on user identity

I'm taking the exam tomorrow at 11AM Malaysia time..Will post the status afterward. Wish me luck!

premium dump (122Q) + 21q are enough for passing the exam

sorry *12=21 from my previous comment.

Q. Which option is correct when using Virtual Switching System
- Both control planes forward traffic simultaneously
____________________________________
My answer will be that:
"Control Planes are combined into one virtual control plane"

Q)A network engineer designing an access layer that requires all uplinks to be active,Furthermore, VLANs must span accross the entire switch block
Which two design fulfill this requirement
- Layer 2 FlexLinks
- Layer 2 loop-free inverted U

---------------
- Layer 2 loop-free inverted U [correct]
- Layer 2 loop square [is the right answer not flex links that are one in stand-bay one active]

Q) Port Security supports which type of port
- IEEE 802.1Q tunnel port

There is not no tunnel in question! Maybe NoNegotiation trunk port 802.1Q

A help for the answer for question 8

What Is the Difference Between STP BPDU Guard and STP Root Guard?
BPDU guard and root guard are similar, but their impact is different. BPDU guard disables the port upon BPDU reception if PortFast is enabled on the port. The disablement effectively denies devices behind such ports from participation in STP. You must manually reenable the port that is put into errdisable state or configure errdisable-timeout.
Root guard allows the device to participate in STP as long as the device does not try to become the root. If root guard blocks the port, subsequent recovery is automatic. Recovery occurs as soon as the offending device ceases to send superior BPDUs.

Please tell me when you say dump valid, if you are referring to 52 + 21 questions or to 122 + 21 questions

Is the dump is still valid ?

Still valid ?

Still valid + 21 questions, passed today 910/1000

what book did you use to study.

Still valid the premium one + 21q?

I JUST PASSED THE CCDP EXAM THIS EXAM IS HARD WORK, STUDY THE DUMPS, DO SOME BOOK READING AND LOCK DOWN ON THE DRAG AND DROPS I RECIEVED THE IS-IS DRAG DROP THANKS EXAMCOLLECTION FOR YOUR HELP AND EVERYONE ON HERE ON THE INSIDE SCOPE.

Hello, my CCNP will expire May 13th. please where can i download the DUMP for free?

Many thanks for helping me

Passed with 9xx.. 122Q still valid with below 21 Q

Passed exam a few days ago 9xx. All that is needed is the 122 dump and the 21 questions that have been posted by others on here.

so those wondering which answer is right, here is my take. i scored above 90% and i was first here to comment about new question and choose best guesses for answer at the time.


Q.Drag the IS-IS convergence components to the order they occur.
Answer:(no idea, didn't study the protocol, so random selection)

Q. Which technology provides a layer 2 loop free and does not contain a port state named "Blocking"
A: VSS( i believe this is correct, i choose this)

Q. Which L2 messaging protocol maintains VLAN configuration consistency
A: VTP

Q.OTV relies on which underlying protocol?
A: IS-IS

Q: Which two methods are available to connect a Cisco IOS device to an active directory domain for authentication?
A: LDAP - Radius

Q. What are two point-to-multipoint overlay tunneling strategies that are used in transitioning to IPv6 (choose two)
- Isatap
- 6to4

Q. Which two BGP attributes can be set with outbound policy to manipulate inbound traffic, if honored by the remote
Autonomous system (choose two)
- Multi-exit discriminator
- AS path
[no idea, i selected as path and something else]

Q. Which STP feature can prevent other switches on the network from becoming the root switch, but still allow that interface to participate in STP otherwise?
- BPDU Guard[ root guard seems to be the best option not sure what option were)

Q.A network engineer designing an access layer that requires all uplinks to be active, Furthermore, VLANs must span across the entire switch block
Which two design fulfill this requirement
- Layer 2 Flex Links
- Layer 2 loop-free inverted U[seems to be right, don't remember which one i selected]

Q. Port Security supports which type of port
- IEEE 802.1Q tunnel port

Q. In which multicast configuration is MSDP most useful?
- Interdomain IPv4 PIM sparse-Mode[no idea]

Q. Which Layer 2 messaging protocol maintains VLAN configuration consistency?
- VTP

Q. Which two methods are available to connect a Cisco IOS device to an active directory
- Lightweight Directory Access Protocol
- RADIUS server

Q. Which protocol should be configure if a network administrator has the following requirement
- GLBP

Q. Which three statements about 802.1X are true
- It is IEEE standard
- It works only with wired devices
- It can allow and deny port access based on device identity

Q. Which option is correct when using Virtual Switching System
- Both control planes forward traffic simultaneously

Q. Which security Mechanism can you implement to protect the OSPF
- Cryptographic authentication

Q. Which virtualization technology uses Layer 3 BFD to detect network failure between Network devices
- Cisco Fabric path

Q. Which interface characteristic is used to calculate cost of an interface in OSPF
- Bandwidth

Q.Which STP feature allows an access port to bypass the learning and listening?
- Port Fast

Q.In what situation must spanning-tree be implemented?
- When redundant Layer 2 links, that are not part of a single Ether Channel or bundle, exist between distribution switches


so best of luck to all who are going for CCDP. study hard, and follow other advice as well.

Should I change my answer like below ?
Drag the IS-IS convergence components to the order they occur.
Answer:
SFP run time
failure detection time
RIB FIB update time
event propagation time

Change to ->>>>>>>>>>>>>>>>>>
First - Failure detection time
Second - Event propagation time
Third - SFP run time
Fourth - RIB FIB update time

Passed this 923/1000 with 122q at 80% accuracy. some new questions and others old questions with new options.

new DND is about IS-IS fast convergence

Just passed the exam with 885 and before exam studied New questions. I had 7 new questions but still unable to answer D&D of IS-IS
Thanks John/ Frank for sharing update questions just read before 10mins of exam lol :)
Cheers guys

OMG... I don't know how I passed but I did.

65Q 75mins You will need 860 to pass

I got 872 points

I used only 122Q premium

Out of the 65q from the exam only 45 were on the 122Q

Thanks to John and Frank for post this

Q.Drag the IS-IS convergence components to the order they occur.
Answer:
First - SFP run time
Second - Failure detection time
Third - RIB FIB update time
Fourth - Event propagation time

Q. Which technology provides a layer 2 loop free and does not contain a port state named "Blocking"
A: VSS

Q. Which L2 messaging protocol maintains VLAN configuration consistency
A: VTP

Q.OTV relies on which underlying protocol?
A: IS-IS

Q: Which two methods are available to connect a Cisco IOS device to an active directory domain for authentication?
A: LDAP - Radius

Q. What are two point-to-multipoint overlay tunneling strategies that are used in transitioning to IPv6 (choose two)
- Isatap
- 6to4

Q. Which two BGP attributes can be set with outbound policy to manipulate inbound traffic, if honored by the remote
Autonomous system (choose two)
- Multi-exit discriminator
- AS path

Q. Which STP feature can prevent other switches on the network from becoming the root switch, but still allow that interface to participate in STP otherwise?
- BPDU Guard

Q.A network engineer designing an access layer that requires all uplinks to be active, Furthermore, VLANs must span across the entire switch block
Which two design fulfill this requirement
- Layer 2 Flex Links
- Layer 2 loop-free inverted U

Q. Port Security supports which type of port
- IEEE 802.1Q tunnel port

Q. In which multicast configuration is MSDP most useful?
- Interdomain IPv4 PIM sparse-Mode

Q. Which Layer 2 messaging protocol maintains VLAN configuration consistency?
- VTP

Q. Which two methods are available to connect a Cisco IOS device to an active directory
- Lightweight Directory Access Protocol
- RADIUS server

Q. Which protocol should be configure if a network administrator has the following requirement
- GLBP

Q. Which three statements about 802.1X are true
- It is IEEE standard
- It works only with wired devices
- It can allow and deny port access based on device identity

Q. Which option is correct when using Virtual Switching System
- Both control planes forward traffic simultaneously

Q. Which security Mechanism can you implement to protect the OSPF
- Cryptographic authentication

Q. Which virtualization technology uses Layer 3 BFD to detect network failure between Network devices
- Cisco Fabric path

Q. Which interface characteristic is used to calculate cost of an interface in OSPF
- Bandwidth

Q.Which STP feature allows an access port to bypass the learning and listening?
- Port Fast

Q.In what situation must spanning-tree be implemented?
- When redundant Layer 2 links, that are not part of a single Ether Channel or bundle, exist between distribution switches

Last comments:
The score of 872 is telling me that about 9q were wrong. I knew 100% my 122q so it must came from these 20 new questions even though I’m so happy to see these questions at the last hour.
Focus in finding the right answer on these new 20q.
This is the way I answered but some are DEFINITELY wrong.
*Just learn your 122q and find the right answers for these 20q and you will pass.
If I were you I will take the exam ASAP.

Hi all just passed the exam. Some of the questions not included in dumps are:

Q:Drag the IS-IS convergence components to the order they occur.
Answer:
SFP run time
failure detection time
RIB FIB update time
event propagation time

Q:Which technology provides a layer 2 loop free and does not contain a port state named "Blocking"
A: VSS
(the Q refers to technology, not protocol and keep in mind that both RPVST and STP have blocking port state)

Q:Which L2 messaging protocol maintains VLAN configuration consistency
A: obviously VTP

Q: OTV relies on which underlying protocol?
A: For God's sake the correct answer is IS-IS "NOT BGP"

Q:Which two methods are available to connect a Cisco IOS device to an active directory domain for authentication
A:LDAP - Radius

I just passed my exam with 910 122q
Extra question

Q)What are two point-to-multipoint overlay tunneling strategies that are used in transitioning to IPv6 (choose two)
- SATAP
- 6to4

Q)Which two BGP attributes can be set with outbound policy to manipulate inbound traffic, if honored by the remote
autonomous system (choose two)
- multi-exit discriminator
- AS path

Q) Which technology provides a layer 2 loop-free topology and does not contain a post state named blocking
- RPVST


Q) Which STP feature can prevent other switches on the network from becoming the root switch, but still allow that interface to particiate in STP otherwise?
- BPDU Guard

Q)A network engineer designing an access layer that requires all uplinks to be active,Furthermore, VLANs must span accross the entire switch block
Which two design fulfill this requirement
- Layer 2 FlexLinks
- Layer 2 loop-free inverted U

Q) Port Security supports which type of port
- IEEE 802.1Q tunnel port

Q) In which multicast configuration is MSDP most useful?
- interdomain IPv4 PIM sparse-Mode

Q) Which Layer 2 messaging protocol maintains VLAN configuration consistency?
- VTP

Q) Which two methods are available to connect a Cisco IOS device to an active directory
- Lighweight Directory Access Protocol
- RADIUS server

Q) Which protocol should be configure if a network administrator has the following requirement
- GLBP

Q) In what situation must spanning-tree be implemented?
- When redundant Layer 2 links, that are not part of a single EhterChannel or bundle, exist between distribution switches

Q) Which three statements about 802.1X are true
- it is IEEE standard
- It works only with wired deives
- It can allow and deny port access based on device identity

Q) WHich option is correct when using Virtual Switching System
- Both control planes forward traffic simultaneously

Q) Which security Mechanism can you implement to protect the OSPF
- Cryptographic authentication

Q) Which virtulization technology uses Layer 3 BFD to detect network failure between entwork devices
- Cisco Fabricpath

Q) Which interface characteristic is used to calculate cost of an interface in OSPF
- bandwidth

Q) Which STP feature allows an access port to bypass the learning and listening
- PortFast

Q) OTV relies on which routing Protocol
- EIGRP


So good luck

((((HELP))))

Can anyone please share the new D&D questions and possibly answers, would really appreciate. Exam booked for tomorrow.

Thanks

@bla,

Which dump you have referred.

Thanks,
Dharmin

936/1000
there is new questions, like D

Are there any APIC-EM and ACI in the exam.
What topic that the 15 new question relate for.
So I will concentrate to study the topic that 15 new question relate.

Passed exam couple of days back.

I studied using premium file(15 days old premium files and to by shock, i got atleast 15 new questions.

as one poster mention some of the new question where

D&D about ISIS recovergence
Question about OSPF area ( i choose answer is virtual link)
ipv6 point-multipoint tunneling ->6to4, isatap.

and many other i don't recall now.

I thought i was going to fail because i didn't study syllabus just few dumps and since i know becuase of my CCIE rns prep.

I scored 910 out of 1000, which i didn't expect to be honest since i know atleast 10 question where new and i had to guess best answer by elimination and decide the right answer.

So, those who want to give exams , please study core subject properly, because it difficult to acheive 86% with exams question with no lab. Odds of new question are there so be prepared for the worst.

Hi All,

I am planning to give this exam does anyone has latest information or Dumps for this knidly share.

Thanks

When is the new exam with 122q or 306q, going to be posted here? I am planning to sit for the ARCH exam soon. Please Help! Thank you!

please update dump, 122q.

Please update dumps.
Many thanks

when the premium dump will be updated?

Please share dump 306 questions .

Where can I find 306q dumps?

The score to pass is 860.
The exam is hard. None of the dumps seem to have all the questions/answers. I had at least 15 questions that if i have not study i would miss.However the 306Q dump was a big help.
D&D about ISIS recovergence(easy one really if you know your stuff). Question about OSPF and the correct answer is virtual link.
ipv6 point-multipoint tunneling ->6to4, isatap.
Cleared with 910.
Do not forget to studdy

How much do we need to pass 300-320 ?

Hi!
I passed this exam on 30 of March. I used premium 122q dump. This dump valid but almost all new questions are easy and relate with this dump score is 936.
Good luck everybody!

Hi All just passed this exam using the 122q dump.
I had 17 new questions + one new drag drop
Here is what I manage to remember:
===============================
Q: What methods there are for ipv6 point-multipoint tunneling?
A: 6to4, ISATAP

Q: OTV relies on which underlying protocol?
A: I put BGP

Q: What OSPF feature is used in order to connect an area to the backbone through another area?
A: virtual-link

Q: (Drag and Drop) Lear about ISIS linnk failure handling procedure
================================

Hope this helps someone

I used 122Q take exam 25/03.
but arise 20 new questions.(include one drag drop). New questions releated to questions 122Q
passed the exam with 910

When premium dump will be updated?

300-320 today to test fails, the topic is not the same 30 questions, please update exam

300-320 today to test fails, the topic is not the same 30 questions, please update exam

Passed on 03/23, 122q still valid, but a lot of new question.

I used 122Q take exam by today.
but arise 20 new questions.(include one drag drop)
passed the exam with 872

hi there , is the 52q dump valid or not ?? Can someone (recently take the exam) answer

I used the Premium 122 Questions. There were several new questions (a few maybe 10 - 12 new questions). Managed to clear with 910.

Dear jack which dump is valid?
122 questions which one?

Hello,

After people have uploaded 306q and 122q dumps, how much time it takes to be aproved here? I'm waiting but no new dumpa have appeared yet.

tks

The new Premium 122q is totally valid. Secured 1000/1000.

Also, there is one modification in the premium 122q.

Q 18. Which Technology can block interfaces and provide loop-free topology

A. STP
B. VSS
C. VLAN
D. vPC

The answer A seems correct indeed. But in the real exam, STP is replaced with VTP! So, I chose vPC instead and got full marks.

Two Drag and drops are also included in both the premium 122q and the real exam.

@Nikola , Please upload the file 306 Q & A ...

I would like to buy VCE premium, however does anyone tell me if VceViewer is right for this purpose?
My avanset of VCE EXAM SIMULATOR has already expired :-(

@ sanjeev: where did u find the 306Q dumps..

where can i find the premium 306Q dumps?

Estimados:

1. ¿El "Q

Nikola ,Is 306q or 122q vaild?
thanks

Sanjeev, where is the dump with 306 question ?

Where to find the 306Q that is mentioned? Can someone upload this?

passed the exam with 936 marks, 306 question is 100% valid

Passed the exam with 936, 306 question dumps is 100% valid.

premium dump is valid 100%

Premium version is available in PDF format?

The 122q has been up for a while. Can more than one person validate this VCE is really valid?

premium dump is valid 100%
passed today 976/1000

From where can we get the 122 Q dump .
Please help

Did someone else tried the premium dump ?

passed the exam, the 122Q premium is totally valid, however, don't forget to apply the below facts before going to the ARCH exam:-

1- 10-15% are Data Center related questions
2- 10-15% are Security related questions
3- The remaining are just R&S and Design related topics based on CCNA & CCNP level

Also check the below question very well before answering:-

In which OSI layer does IS-IS operate?
A. Layer 1
B. Layer 2
C. Layer 3
D. Layer 4
Answer: C

Answer on dump is layer 3, but I personally prefer the layer 2 answer, check the below and replay.
https://en.wikipedia.org/wiki/IS-IS

Best luck on the exam.

Hello folks, 122q dump Is this dump valid? Can anyone give the reply ? Thx in advance ;)

306q is valid or invalid ?.
Did anyone exam the cert ?

I have 122q dump. Is this dump valid? Can anyone give the reply

This Premium 122q is valid? I'll intend to buy it.

@Nikola

Please consider sharing the file via interest neutral ICT certification study website with a collection of resource and users.

This may also apply to other certification takers with accounts here.

Thank you.

Im not sure about this 306q dump. I cant guarantee that is good... Looks a little outdated, a lot of duplicate questions.
im taking my exam in a few weeks

@Nikola do you have planned the exam?

i have a new dump, 306q
i will upload it...

Is there any feedback regarding the new premium 122Q? Is it valid?

Anyone passed this exam with Dump Premium 65Q since Feb 10, 2016?

is 65q dumps are still valid ? . someone please confirm

Luckily passed the 300-320 exam! Many many new questions! I had 65 questions, and got a lot of new Drag

Is premium 300-320.vce
122 questions & answers valid ?

Did anyone has try the new 122q premium dump? Please share the result