Pass Your Cisco 300-115 Exam Easy!

Hey Guys !!

I was fail, please send me the valid dumps in PDF format on vh.vadera09@gmail.com

Hi guys i will take the exam next week,please send me the lastest dumps pdf at ayiha.lesa@icloud.com

These are questions that i just took on 28/12/15.
1. Drag and Drop Question
CDP
– multicast destination address 01-00-0c-cc-cc-cc
– 60 seconds
– compatible with IEEE 802.2,802.3
LLDP
– multicast destination address ……..
– 30 seconds
– Inform topology change

2. How many table in DHCP snooping database can bindings?
answer : 8000




Ip source guard protects at which layer?
Answer: layer 2

Which feature allows the mac address to be saved in the startup config and be there when the switch is rebooted.
answer: Mack Sticky.

When you configure layer 2 Ethernet channel, which statement of placing the ip address is true?
-the ip address is placed on the lowest numbered membered port
-the ip address is placed on the port channel channel logical interface
- the ip address is placed on the highest numbered membered port
-the ip address is assigned via dhcp only
**I picked “the ip address is placed on the port channel channel logical interface”
For etherchannel load-balancing which option is valid:
a)-Source mac address and destination ip addres
b)- Source mac address and source ip addres
c)-Destination mac address and destination ip address
d)-Source mac address and destination mac address
I took d)

Instead of flooding this thread with "can you please send a valid dump to my example@email.com" I thing the focus should be on pointing out the wrong/invalid questions in the dump and replacing them with new once, people that took the most recent test can help out with that.

Hi all,
Please send me the latest pdf 193 Q to hiba_ahmad_ali@yahoo.com

@Himbol, I thought the same thing. However, the question didn't state the state of the switchport as I would of picked L2, but it meant the layer of the OSI Model. It had L1 - L5, I picked L3 because the name is IP source guard and looks at IP to mac bindings at the DHCP Snooping Binding table. But I also was leaning towards L2. But if anyone gets it and remembers the full question, please post.

please send me updated PDF or vce 193 Questions
joeblack14613@gmail.com

Dears , please you please send me the updated PDF 193 Questions to my email ratchs@hotmail.com
thanks a lot

Friends be careful.Exam questions are changed. Almost 25 out of 40 are changed.I could not get success. I got 741 / 1000.If anyone have the latest dumps plz send me at kashifshahid27@hotmail.com

Please can anyone send the current question (PDF) to my mail o_amadic@yahoo.com

Can someone send me the pdf at samoon@scqatar.com or the valid Dump pleaaase :'(...

Some of new Question in the exam.
See if anyone can provide more

On which layer does IP source guard provide filtering to prevent a malicious host from impersonating IP address of legitimate host?'
A Layer 1
B Layer 2
C Layer 3
D Layer 7
Answer : B

Which feature puts the port into err-disabled state when the port has PortFast enabled and receives BPDUs?)
A EtherChannel
B BackboneFast
C BPDU guard
D BPDU filtering
Answer : C:

When SDM templates are configured, which action must be performed for the configuration to take affect?
A write memory
B shutdown) b
C reload
D backup config
Answer : C

i need a valid dump plz on my email mohamed.elraie77@gmail.com

Please somebaody send me updated pdf 193Q mrtozdemir@hotmail.com, THANKS

Can some plz send me the update 193 dump to me. plz send to kahenghoi@gmail.com

Hi I need latest CCNP switch dumps (300-115) in pdf can anybody pls fwd to my mail ID
dushi013@gmail.com

Which two statement about HSRP , GLB and VRRP is true?
a)HSRP is the preferred protocol to be utilized on multivendor environments
b)VRRP has one master router, one standby router and many listening routers
c)GLBP allows for a maximum of four MAC addresses per group
d)VRRP is a cisco proprietary protocol
e)hSRP supports up to 255 groups on the same switch
answered: c and e

DSW1 should share the same MST region with DSW2 . which statement is true?
On the image , VTP on sw1 is client mode and sw2 server mode and both revision numbered are different, Both switches are running VTP version 1 and have the same domain called Dallas.
a)-Configure DSW1 with the same region name, revision numbered and vlan-to-instance mapping as shown on DSW2
b)- DSW1 automatically inherits MST configuration from DSW2 because they have the same domain name .
c)- DSW2 uses VTP server mode to automatically propagate the MST configuration DSW1.
d)-DSW1 is in VTP client mode with a lower configuration revision numbered, therefore, it automatically inherits MST configuration
e)- Configure DSW1 with the same version numbered , and vlan-to-instance mapping as shown on DSW2.
I think E) is correct

Ip source guard protects at which layer?
Answer: layer 2

Which feature allows the mac address to be saved in the startup config and be there when the switch is rebooted.
answer: Mack Sticky.

When you configure layer 2 Ethernet channel, which statement of placing the ip address is true?
-the ip address is placed on the lowest numbered membered port
-the ip address is placed on the port channel channel logical interface
- the ip address is placed on the highest numbered membered port
-the ip address is assigned via dhcp only
**I picked “the ip address is placed on the port channel channel logical interface”

For etherchannel load-balancing which option is valid:
a)-Source mac address and destination ip addres
b)- Source mac address and source ip addres
c)-Destination mac address and destination ip address
d)-Source mac address and destination mac address
I took d)

Questions have changed ... scenario questions still the same though

Could anyone please provide me with the updated pdf or new questions? My email is zm247@hotmail.com and thanks in advance

Hi friend, please send me new dump to nwayaungstar@gmail.com. Thank u

hi , does this mean that certprepare q&a's are also no longer valid - has anyone recently i.e. last couple of days sat the exam, please comment and share. Also if anyone has an upto date paper please share gixxer600k7@yahoo.co.uk. Im also after the latest version of packet tracer if anyone can help. much appreciated

Don t trust this dump not valid, i sit exam yesterday .. totally change question

I have a question:
for candidates who failed on the exam,
if they take the second time, does it is harder than the first time?? and the whole question from previous exam, is changed in the second exam ?
Please mail to my email : pechdarapin@yahoo.com

Hello i have the Exam on 04.01.2016 can anyone send me the valid questions PDF'S ? on this E-Mail: ritchy1988@web.de

Hi guys please send me the lastest dumps pdf at poniente1980@gmail.com

Need valid dumps in pdf format..have exam on 30th dec...please help !! share at gayatri.030@gmail.com

Please send men nev pdf quessions: ^^amirov.farid@mail.ru^^

Dear , please send me the updated PDF 193 Questions to sourav.asansol@gmail.com

Thanks.

Hey guys any news of the latest dump , was planning on taking the exam early Jan, might have to wait. Does this mean the q&a's on certprepare are also invalid.

guys please if anyone has the 193q in pdf, kindly send to me M.amin_7127@yahoo.com

Hey All, I have heard the exams have changed for Switching paper. Anyone with the latest version please? My NP is expiring soon. Any other way to renew the exam please? Kindly send me the dumps on ozil.memon@gmail.com if any of you have a version any Nov 22th.

Hello,
I failed on Dec, 22th. Please send me the latest dump in pdf to my e-mail pykyta@gmail.com. Thank you.

@Null0,
do you think the answer is correct, it seems IPSG is supported on layer two ports and cannot be used on layer 3 ports or SVIs

1. Ip source guard protects at which layer?
- I picked L3

Hi can someone please send me the updated PDF 193 question 12/22/2015.
email:null_0@outlook.com

Thank you.

Hi, please can you send me the updated PDF 193 Questions to my email nocrys@gmail.com

Please share the latest pdf dumps file on the below email.

Ruhail_89@yahoo.com

Dears , please you please send me the updated PDF 193 Questions to my email markole1986@gmail.com

Please share the new PDF dumps 193Q i am very very thankful to you.Email:ahmed87riaz@gmail.com

Dear,
please send me the updated PDF of 193 Questions to sourav.asansol@gmail.com.
Thanks.

Dear , please send me updated PDF 193 Questions at lsaverio@libero.it

I need to know this dumb still valid

Hello Everyone.These dumps are not valid,I failed today with 780 score because there were app. 25 new questions on exam,i studied from 164 and 158 but they are already not valid.be careful who want to take exam.labs are same.
security 100%
layer 2 tech 75 %
insfras 88%
who will have new dump pls send me also
hidayetzadelvin@gmail.com

@Null0

Also just remembered another question;
1. Ip source guard protects at which layer?
- Correct Answer is Layer 2

2. It had a question on the correct loadbalancing on Etherchannel. Can't remember what it had though.
In exam the only valid option was source mac---destination mac

3. Which feature allows the mac address to be saved in the startup config and be there when the switch is rebooted.
- Mack Sticky. this one is right

Heard that Cisco is going to be strict going forward and frequently change the questions.

Hi I need latest CCNP switch dumps (300-115) in pdf can anybody pls fwd to my mail ID
ahmedakeel13@gmail.com

Took the test today and failed with a 750. almost half the questions were new.

can someone send me updated PDF on ahmed_moniem88@hotmail.com because I have exam tomorrow

can someone send me the new updated PDF because I have exam tomorrow

please send me updated PDF or vce 193 Questions

hello guys. please help me.who can send me last working exam quession pdf amirov.farid@mail.ru) Please

Anybody knows how much time will take by examcollection to update the dumps ?

Dear , please send me updated PDF 193 Questions to my email taylanmansur@gmail.com

I would be thankful if someone will share the pdf question to me, pls send: glenalarcon@yahoo.com.

Hi guys please send me the lastest dumps pdf at shalini.twinkle123@gmail.com. Thanks!!

Dears , please you please send me the updated PDF 193 Questions to my email m_mdawood@Yahoo.com

Dear , please send me updated PDF 193 Questions.

email:>wagner.wmarques@gmail.com.br

Also just remembered another question;
1. Ip source guard protects at which layer?
- I picked L3

2. It had a question on the correct loadbalancing on Etherchannel. Can't remember what it had though.

3. Which feature allows the mac address to be saved in the startup config and be there when the switch is rebooted.
- Mack Sticky.

Not valid anymore, 750/1000 with 4 questions from the dump... Merry Christmas Cisco unreal world certification

can anyone send me the pdf please!!!!...djohnson0401@gmail.com

If you can send me the latest pdf on: wnarciso_vc@hotmail.com Thank you!

@PASS Switch, could you send latest pdf to my email? ingresenlightedpower@gmail.com

Pass SWITCH, please send the new questions in pdf to me, my email is bit886@rocketmail.com, thanks

If you can send me the latest pdf on: mo_s_t97@yahoo.com , I'd be truly grateful. Thank you!

Dear , please send me updated PDF 193 Questions to my email abujas2525@gmail.com

Dear All,

These are the new questions which we are facing in the exam. Go to certprepare.com site ----> share switch experience and you will get all the answers..... Most of the people have given the exam and PASSED it...

These are questions that i just took on 18/12/15.
1. Drag and Drop Question
CDP
– multicast destination address 01-00-0c-cc-cc-cc
– 60 seconds
– compatible with IEEE 802.2,802.3
LLDP
– multicast destination address ……..
– 30 seconds
– Inform topology change

2. How many table in DHCP snooping database can bindings?
answer : 8000

i remember two new question
1-what status of security port
A-on
B-disable
C-shutdown
D-auto

2-how much maximum binding in dhcp database
A-1000
B-2000
C-5000
D-8000

Hi I need latest CCNP switch dumps (300-115) in pdf can anybody pls fwd to my mail ID
kh_hemeda@hotmail.com

Plan to take exam today just come up to see any update status

Thanks for everyone to notice the exam was change.


AnyOne got the new question with pdf?
please send to anthony_cttam@yahoo.com

Be carful guys , don't go through switching exam now . There is new questions . I did exam yesrrday and I got failed

I used Galvin as the 164 there was too many incorrect answers. Galvin more accurate but they must of added at least 30/40+ new questions. Getting the labs correct is not enough to get you a pass.

hello folks,
does anybody know when the new VCE file will be uploaded ?

Please send me the new updated pdf file from 22 Dec with 193 questions also, on this email address: Bawa20@gmx.de

Failed with 760 today @ singapore. only 50% of this dump is valid. there is no backward arrow in exam so dun skip any que: GLHF

I failed today with 760 today @Singapore. Only 50% of this dump is valid. Be aware that there is no backward arrow in the exam (dun b like me). :) GLHF

@Hadi
Hope it's going well with you isa tomorrow

no vaild

I will offer the test tomorrow ان شاء الله
I'll tell you with questions and new
What are the questions that still exist in this form

Not Valid

I got 770 , just need 1 more answer correct then I can pass. The dumps changed since 18th Dec. Hard Luck! Paid itexamfox to get something that made me failed.

Dump not valid- only 15 questions from this dump

This dump is INVALID. All questions have been changed.

@ AdamJ @Arial

Which dumps did you guys use?
Premium 164 or Galvin?

is this still valid or not tell me pls email me new latest pdf i think new are 193Q

plsss send me 22 dec 2015 update pdf
to my email
zync.tab2500@gmail.com

any update

no more valid

Anyone can confirm if this dump still valid ?

many questions are changed , don't depend on this dump

Totally NOT valid , failed today , only 2 questions from this dump

i will take the exam tomorrow, could you please verify that is it still valid or not?

Took Exam today and failed 750. I must of had 14-5questions from this dump and the rest are all new. Sims are the same except copy run start now works. This dump is no longer valid

Hi I need latest CCNP switch dumps (300-115) in pdf can anybody pls fwd to my mail ID
pranavpaisari@gmail.com

kindly share latest PDF form dumps of 300-115 and 300-101. Kindly help...
email: pranavpaisari@gmail.com

Dump is no longer valid- only 20-30% of questions from this dump- wait for updated version

Hey guys would someone be so kind and email a pdf version of this paper if you have one, alternatively is there a good site I can convert vce into pdf. Many thanks

This dump is still valid, no new questions. 36 questions including AAAdot1x sim, LACP-STP Sim, Ferris. Passed with 979/1000

Are the dumps valid as of today

@Austyl do you remember any of the new questions you got ? Did you get a drag and drop question? Also how long do people reckon until the new dumps will be made available?

guys i failed exam.. 731 marks .. 70% exams were out from dump .. still in shocked how it happened. they changed most of questions. do not rely on dump. after 20th of dec 2015

not valid just the configuration Question still the same ,but another Question are totally different.
549/1000.

Be careful ,almost 70% questions are out of this dumps.....Thanks

Hello,
Passed yesterday failed with 760.the dump is completly different of all what i see in this site.just 7 or 8 question from this dump.the rest of the question are different.the Lab are the same

Almost half of questions are changed.
Be careful!
We need to wait for updated vce.

Dear All,

One of my friend took the exam yesterday and Failed. He informed me that quarter of the questions were out of dumps. Total questions in the exam were 40.

Any guy from Islamabad pakistan took the exam in previous weeks ?

please share your experience.

Failed with a 650. only 25% of the VCE questions were on the exam. I got a question asking how many addresses could be stored in a DHCP snoop table, and some really technical questions not regarding to configuration or how stuff works. Also, got the aaadot1x lab. Too bad I prepared for all of the other 7 labs and not this one. I am in the UK.

paper completely changed! Don't take risk..

Any person from pakistan took an exam in this week or before ? please share your experience.

Please send the valid dumps on ruhail_89@yahoo.com

Failed lot of new questions.

Galvin and JVD are no longer valid, all new questions. Labs are still valid.
AAAdot1x, STP-VTP, HSRP Sim(not Ferris) and new CDP-LLDP Drag and drop.

exam is not valid all new Q just the sims that are still there

Dear All,

I will be gratefull to you if you share the valid dumps pdf to the below email.

ruhail_89@yahoo.com

Be careful questions are changed about 35% only labs still same and most questions about numbers there are easy but you need to memorize all the default standards.

exam is not valid please do an update

Please anyone send the latest dumps in PDF to below email-ID.

ruhail_89@yahoo.com

failed today- 721/1000 (pass mark 790)

labs are the same (dot1x/LACP switch b configuration) however most of the questions are new

any details on the new questions you encountered?

Dear All. I am Imran from Islamabad Pakistan.

I took the exam today and Failed :( I agree with Austyl that quarter of the questions were not present in the dumps. In exam total 40 questions were there. More than 10 questions were out of galvin dumps and premium dumps.

However I successfully attempted the LACP-STP and DotlX lab. Only these two labs were came in my exam.

Layer 2 68%
Infrastructure Security 92 %
Infrastructure Services 88%

sat exam other day. About 60% of questions are new.
Same old sims but I found questions tough as you either know it or not
- not many easy to guess.

Back to reading the switch 300 - 115 PDF for me.

Failed today.
30 questions in exam is not from this dump.

I just test today got 780... not passs. about 30 of 40 question I found today are not in exam....

Dear all please hold on. Exam change new question. But lab no change.

Hello, I'm seeing comments saying the dump is valid and sorta still valid. Is it really valid or better to get the premium dumps? Also, how many actual labs that require configuration are in the exam? I'm looking to take it soon. I just want to know if the dump is still valid and how many labs that require you to program are going to be on the exam. Please e-mail me @ stealth_slash@hotmail.com and let me know. Thank you in advance! =)

Dear all
I take today. Not pass. It'S change to all new question. Have 2-5 question from galvin. But lap same. AAA and lacp stp and hsrp. Good luck.

Dear Friend,
Really need your favor, please send me the valid PDF Dump in my (lavendar2779@yahoo.com)

To renew my CCNP does anyone know if I have to re-take all 3 tests ( T-Shoot, Switch and Route) again or just one of the tests?

please sent me the latest dump in PDF formate in this mail address to dn78213@gmail.com

Passed today December 17th with 874. Dump is valid but PLEASE COMPLEMENT WITH JvD or Premium Dump as well! It has 7 extra questions (158-164).
HSRP Sim, VTPv3 Sim, LACP with STP Sim, AAAdot1x Sim and the one with vlan´s by colors (Questions 148 to 158 from JvD). Don´t memorize ip addresses since they can change.

@Ahmed

Update you VCE Player then you can.

Be careful guys, passed today ... A quarter of questions is not in galvin :/

took the test today. dump is still valid, no new questions.

please sent me the latest dump in PDF formate in this mail address "aguntok1985412@gmail.com".

thanks
shibly

I forgot to write about the VTP sim.
The Sim had been updated a bit.
It was asked to enable VTP pruning on FA0/3-4 but you can't do it because VTP PRUNING is not available in the sim.
So when under VTP you not see the command pruning then ignore the task.

I ran this VCE on VCE player 1.1.6 and received error "File currently in use by another program (possibly by VCE designer). Close the file before adding it to the exam list", whereas I just downloaded and it is not open anywhere else?
Q- How can I open this file
Q- If someone has a PDF file
Please email me at ahmedawad87@gmail.com
Thank you in advance

Can someone send the latest dump pdf to gooddeal2012@yahoo.com?

Thanks in advance

The Dumb is Valid, But there is sometihgn about the AAA Dot1x I was not able to use NO commands so when you wite a command in the sim of AAA be sure you make no typo or you can'T remove it.

please send me the pdf on this email m_mdawood@yahoo.com

Hi,

Can someone send me the pdf to my email tushar@hotmail.fr ?

Thanks

Tushar

Please can someone assist me with the latest valid dump in pdf? my email is erick.b.otieno@gmail.com

can anyone send me lastest dump PDF on amravat@hotmail.com

Passed exam 884/100 on 8th Dec
Dumb is still valid 100%
I used Galvin and premium dumbs
Sims was
aaadot1x
100% ok and no change...
LACP
There is no ip default-gateway 192.168.1.1 in Switch A
Don't worry
run cdp neighbors in both Switch A & B
then ping IP from Switch A and Switch B
I got 100% ping from Swtich A to Switch B and Vice versa.
Simlet HSRP, VTPV3
Finally I just want to thank everyone who shared their experience with me.

I passed today 932 dump is still valid

Can someone send me the pdf at ngansop.sergeb@gmail.com.
thanks.

Please send me the pdf version of the latest 300-115 dumps or link for PDF please send to naren8975@gmail.com

Exam still valid. passed today, scored 916 . layer 2 tech-90% , infra sec 100% ,infr serv 100% , LACP and AAA labs , thanks to God

Can anyone share lab information for AAA and vtp3?
I see some comment about vtp-stp. is this different lab than lacp-stp? I am taking exam in one day. Please share your information at mukhi65@yahoo.com.

Passed Today 916/1000
Premium valid,
All questions from Premium Dumps,
Galvin dumps also still valid except 2 questions.
HSRP, AAAdot1x, LACP With STP Sim, VTPv3 labs

Use this link http://www.certprepare.com/ for Lab prepation and download lab exercise and simulate from packet-Tracer..

All the best friends....

aaanser3@gmail.com

@hafi
no there is no drag and drop

Passes today premium 164 is valid
Labs ; AAAdot1x,hsrp,lacp,vtp

hi
please send me the pdf version of the latest 300-115 dumps please at soumya.0617@gmail.com

Still Valid. Passed at 8 Dec

Passed today. Premium dumps 164 is valid. Used Certprapare for Sim.
Labs - HSRP, AAAdot1x, VTP-STP, VTPv3 labs.

hello
please i need the lastest dump but in pdf
please send it to at taoufik202008@live.fr

can anyone send me the PDF file to li85su@hotmail.co.uk please.

can some one please send the galvin dumps in pdf on prathmeshnaik90@gmail.com. I going to answer the exam next week

Hello All,

Just want to check if there drag and drop questions.

Thanks in advance.

Passed today 937\1000
Dumb is still valid 100%
I used Galvin and premium dumbs
Sims was aaadot1x hotspot vtpv3 and lacp

I just want to thank everyone for all the work done on the dumps. Could not have passed without this

Passed yesterday.932/1000. Still dumps are valid.cheers!

Passed this exam today 832/1000.
Later 2 tech. 80%
Infrastructure Security 100%
Infrastructure service 100%
got this error in trunk conf in sw B for stp-lacp lab
Command rejected: An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode

Passed this exam yesterday, 832/1000.
Later 2 tech. 80%
Infrastructure Security 100%
Infrastructure service 100%
Premium dumps 164 is valid but you sincerely need certprapare for easy understanding of Sim. HSRP, AAAdot1x, VTP-STP lab

which new questions pls reply

Dump Galvin and JvD still valid, Passed today, 832/1000, was 2-3 new questions, labs VTPv3, LACP-STP, AAAdot1x and Feris Plastic.
Be careful in the labs values can be different, for example, the radius server 172.120.40.46, instead of 172.120.39.46, respectively I used
radius-server host 172.120.40.46 key rad123. Lab LACP-STP completely solved as described in certprepare.com Ping 192.168.1.1 was successful,
do not forget look "sh int br" To make sure that the interface Po1 is Up.

D correct ip address for d radius-server is 172.120.40/46

passed 1-12-2015 with 985 / 1000
All question came from certprepare.
Labs- VTPv3, LACP-STP, AAAdot1x and HSRP hotspot.
all my marks loss in Infrastructure security

Hello,

The correct config is radius-server host 172.120.40.46 key rad123. This is because the Radius Server host IP is 172.120.40.46. Your server host IP address could be different in the Exam..always use what you are given in the exam.

Thank you.

could anyone please send me the pdf file of exam 300-115. your help is appreciate. thank before hand. pechdarapin@yahoo.com

I wrote the switch exam on the 30th November, 2015 and I passed.

My observations are as follows:
you need to show running config before you start configuring the lab sims.

In my LACP, i had different spanning tree modes configured on Switch A

Hello gays, kindly send me the ccnp switch new dumps pdf file.
m.naseer.aslam@hotmail.com

Dumps are still valid

score:958, done exam yesterday
Galvin.158q still valid.
and download and follow below dump pdf.it has extra questions..
http://www.mediafire.com/download/nw8n93w9rs7u20a/300-115.pdf
for simulation questions follow http://www.certprepare.com/

i woud apprecaite if recently passed guys share their experience on AAA & LACP labs

i took Swtich exam on dec 1. Unfortunately i failed with 731 /1000 , layer 2 technologies 80%
infra security 33%
Infra service 100%
HRSP ferris medium,VTP 3 , AAA, LACP ,i believe i messed up with AAA lab although i typed cmds exactly from this certprepare , i had no idea what was wrong .Please anyone who passed guide me ,which is valid to use below three things ? >
radius-server host 172.120.39.46 key rad123 ( i used in exam ) OR radius-server host 172.120.40 .46 key rad123 ,another thing is > #vlan access-map MYACCMAP 20
#action drop ( some say no need to use ) , > ip access-list standard 10 (some say should replace legacy ACL)

GOD bless & Good luck guys , lucasnyeinchan@gmail.com

Could you please send me the PDF version of valid latest 300-115 dumps

can someone please send me the PDF version of valid latest 300-115 dumps
Email:m1k3rm1a521@yahoo.com

Which of the ff config is correct
DSW(config):radius-server host 172.120.39.46 key rad123
DSW(config); radius-server host 172.120.40.46 key rad123. Pls I need response

Please can someone clarify Raduis sim
#radius-server 172.120.39.46 or 172.120.40.64

please which on is right 40 or 39

can anyone send me the PDF file to luckykhan9290@yahoo.com

I want to retake exam since i failed yesterday.Scored 770 marks.Did mistakes in LACP-stp.can anybody confirm do i need to pay again 250$ for retake

could you please send me the .pdf dump.
2g.adam@gmail.com.

Which of the following config is correct
DSW(config):radius-server host 172.120.39.46 key rad123
DSW(config); radius-server host 172.120.40.46 key rad123. Pls I need response

Could you please send me the PDF file for this VCE?: urbanshares@gmail.com

I have the exam soon and need it to prepare properly. Thanks in advance!!!

what about premium dump is it valid ? is there any new questions
please update

passed the exam on 28-11-15.874/1000 dumps valid. all 36 questions were from the galvin dump. had aaadot1x and stp-lacp lab, vtpv3 and hsrp simlet. note: the ip address used in d dump for the radius-server is wrong, i used the wrong ip and i failed 2 weeks ago, but i used the correct ip(172.120.40.46 as specified in the exam)and i passed. anybody need info to email me on luks4real@yahoo.com

I am trying to open this up on A+ VCE and the file fails every time. How are you guys opening these VCE files or this file in particular?

Cleared the exam today. Galvin Dump is still valid.

LACP-STP,AAA simulations and HSRP question

Anybody knows if there is any drag and drop question when took the exam ?

could someone please send CCNP 300-115 dumps pdf

Plz send me a valid exam with Galvin and JVD dump as PDF files;my CCNA will expire soon.
joeblack14613@gmail.com

Dear all,
Plz send a valid exam, I have an exam next week as my CCNA will expire soon.
Please provide me with Galvin and JVD dump as PDF files.

Could you please send me the PDF version of valid latest 300-115 dumps
Email:aaanserali@gmail.com

Hi All,
Can anybody send me this dump in pdf format ??
I am planning to take exam in 2 weeks.
My email id is gk.kundum2013@gmail.com

Dump valid, passed today with score 874, this is my second attempt. The radius-server ip used in d dump is wrong. The correct ip is 172.120.40.46 as specified by Cisco.

passed 300-115 today 28th nov (874/1000)

dumps are still valid (no new question for me)
so how did it go

total question 36
Ferries plastic simlet with 4 sub-questions
HSRP simlet with 5/6 sub-questions
2 labs (aaa and lacp with stp as usual)
and 32 normal questions with MCQ (no drag and drops)

i would like to take this opportunity to thank all those who published their valuable opinions and suggestions and wish luck who shall take the exam !

last but not least "Exam-collection and cert-prepare"

tip: just keep your cool, don't panic !

(study from galvin and JVD, i found some answers in JVD are wrong, be aware)

you guys rock !! thanks a ton...

Cleared the exam. Dumps are valid. there are 2-3 new questions.

LACP-STP,AAA simulations and HSRP question

Could you please send me the PDF version of valid latest dumps to bekita.rebeca@gmail.com
Thanks in advance

Could you please send me the PDF version of valid latest dumps to bekita.rebeca@gmail.com
Thanks in advance

Please could someone send me the PDF file of this dump on 300-115 exam to marckgh@gmail.com?
I have the exam next week.
Thank You.

The galvin dump is still valid. I did some mistakes on lab with lacp, but I passed. eherchannel was not up/up.. tried to troubleshoot but I did not find the reason why, cause restricted number of commands is available. I had lacp-stp, dot1x, Ferris plastic and vtp3 labs

Valid dump passed today with 9XX/1000
Thanks
if you need any help send to me @ ahmad.m.kefaya@hotmail.com

Please someone if possible can you share PDF file of this dump or latest dump of switch on smitavsawant@yahoo.com, i
I have planed exam on 10th Dec. Thanks So Much in advance.

I am writing Can anyone forward the PDF version of Galvin's dumps to gaikwad_s@rediffmail.com .... Thanks in advance for the same