Pass Your Cisco 400-051 Exam Easy!

This dump is not valid anymore. Not even 10% from this. Failed 814/839 today!!!

Only 20% of the dumps are valid, there are many questions from different sections as mentioned by D

failed today...only 20% questions from this dump.lot of new questions.

This vce only covers 50% of the exam. I got 629 and I needed 839 to pass. Don't use this one.

Kazmi, special care because at this moment there is no dump on the market that is valid, I lost the exam and I am hoping to update the test

Kazmi, special care because at this moment there is no dump on the market that is valid, I lost the exam and I am hoping to update the test

Pls guide from where I can get the updated dumps, want to give exam in2 days

Can someone please update the dumps?

Dump is 30-40% valid - so you need it to get that much. 60-70% is new, exactly as Mage said. CUCM v9 native queuing, QSIG over SIP, CUCM SME, WAN clustering, SIP URI dialing, IOS DHCP debugging, E1/T1 SF/ESF format, etc. I failed, got 780. Total 110 questions, passing score is 839 I think.

As Mage said, out of 110 questions, maybe around 30-40% from this dump. Rest ALL new. With the topics Mage mentioned - CUCM v9 queuing, QSIG, CUCM SME, WAN clustering. I would add DHCP, T1/E1 frame/superframe, QSIG over SIP, SIP headers, E1/T1 encoding (B8ZS, HDB3), signaling standards, etc. It was nasty! :) I failed with 780.

admin can say abt this , this is valid in some country?? or this is not valid any more??

Failed the exam today with 750 score (pass score is 839). Luger.150q dumps are not valid anymore. There are many new questions including CUCM v9 queuing, QSIG, CUCM SME, WAN clustering, etc. There are 110 questions on the exam and only 30-40 of them was from this dump.

I would say there is about 40% new content so there should be an update coming.

is it valid?

Hi Peter, What is your score? Were the questions changed a lot?

Hey Peter, can you elaborate a bit ? So you're saying you got altogether a different set of questions ? Please reply.

a lot new questions

most new questions about the CUCM v9.1

@ peter you refer this dumps??? & fail???

Test is not valid anymore I had the exam yesterday and I failed :(

ColabV the question is tricky. It says max amount of bw allowed for PRIORITY queuing of RTP... there is no priority command in the class therefore this is just CBWFQ not LLQ.

Is this dump valid?

anybody whos clear this exam recently..

Q79.max bw for rtp packets with dscp of EF ans at 0% of T1, why not 33% of T1?

nortel I read document on cisco according to busy-trigger-per-button, not just incoming also include outgoing ,I think answer is right:
This command limits the calls to an octo-line on the specified phone by triggering Call Forward Busy or a busy tone. After the number of active calls, incoming and outgoing, on an octo-line directory number reaches the limit set with this command,

All - thanks for confirming the validity.
@Nortel - The answer to the Question is E and not E...
busy-trigger-per-button command considers both incoming and outgoing calls ..As total active calls are 3, the 4th call will be forwarded to busy tone(Option E)
" After the number of active calls, incoming and outgoing, on an octo-line directory number reaches the limit set with this command, the next incoming call to the directory number is forwarded to the Call Forward Busy destination"

Reference : http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_b1ht.html#wp1050158

Dumps are valid passed the exam today.

Dumps are 100% valid, passed the exam today in India.

any one passed from Pakistan ?

Can anyone tell me what CCIE book i need for Collaboration. I can't find it anywhere.

Did anyone recently passed from India? Pls let me know.

Still valid. Passed!

!
ephone-dn 1 octo-line
number 2001
huntstop channel 4
!
ephone 1
mac-address 1111.1111.1111
max-call-per-button 5
busy-trigger-per-button 3
type 7965
button 1:1
!

Ephone 1 has three active calls. The first two calls were inbound calls, which the user put on hold
to place a third call outbound. What will happen on ephone 1 when a fourth call arrives for
extension 2001?
A. The fourth call will be delivered to ephone 1 because it only received two inbound calls, one call
less than the busy-trigger-per-button setting.
B. The fourth call will be delivered to ephone 1 because the huntstop channel setting is not yet
saturated.
C. The fourth call will be delivered to ephone 1 because it can handle up to five calls on each
button.
D. The fourth call will be held temporarily by the IOS Software until ephone 1 disconnects one of
the active calls.
E. The fourth call will not be delivered and the caller will hear a user busy tone.
Answer: E ->> A

* huntstop channel X - prevents incoming call channel hunting (our case - max 4, a fourth call arrives)
* max-calls-per-button maximum number of incoming + outgoing calls (our case - maX 5)
* busy-trigger-per-button - maximum number of incoming calls (our case - max 3, the first two calls were inbound calls).

Will the dumps will be same, If I give this exam from Pakistan ? :-)

I think that Q31 is incorrect. Should be A?

any one passed from India?

The dumps are valid! passed with 9XX. Only Abhishek has failed (or claim so) rest all have passed
Exam Q24 - AVC & MPEG-4 Part 10
Exam Q15 - it is DLCX instead of CRCX
Exam Q110 is CRCX instead of DLCX
maximum length of E164 number is 15 (maximum length of E164 number - ITU recommendation is 15 digits. http://en.wikipedia.org/wiki/E.164)

Any other wrong answers beside question #102 and the miss-type on q15 and q110?

Does someone give paper from Pakistan ?

This dump is 100% valid. All the questions on the exam were from it. Some of the questions have obvious mistakes, but having the questions is important.

Failed the exam thanks to this dump. They have changed the questions completely. What a waste of money and time.

I can see some obvious wrong answers. Does anybody try it in Australia?

Exam passed today and successuf! 976!

all the questions from the dump were in the exam.

But, you need to correct some wrong answers, but have questions is already a big luck

Failed today as questions were completely different & did not match this dump. It is better to wait for someone else to share a more recent and accurate dump. Money wasted!

thanks everyone,

Could you please upload the dumps with these corrections.

KK is right. All questions were in this dump. Questions are which about the DLCX - CRCX

This dump is valid!
I have passed the exam today with 98x. Every single question was from this dump. I made some mistakes intentionally.

Note that some question answers are incorrect or misplaced.
#15 is actually DLCX
#110 is CRCX

mahmut akalin: what do you mean by "Some questions are different"? There are new questions or some question phrased differently?

Please provide the valid dumps, as I have preparid these dumps,
Please tell me the question numbers, whcih are wrong.

mahmut akalin: Could you share your thoughts on the questions that you think are not correct? Thanks in advance!

batman: How many questions were from outside of the dumps?

Passed. Score 1000, Some questions are different and some answers is wrong in this file. Be careful !. You can fail

Batman this dump is valid?

Please provide the valid dumps, as I am preparing for this certification.

let us all know if these are valid ones?

Are these files valid, I can not run them post downloading it, if I am missing anything after downloading to run it properly pls leme know.

Exam is good there are other questions not included

Is it valid??? Please share if anyone passed recently with this questions

Good for the Canada, score 865

hello jim
as per your update you sat in the exam so pls confirm is this dump carried all question ?
how much valid this dump is?

No this exam is not good, over half new questions. Barely missed it and $350 down the drain. Slightly missed it but will tell you over 50% is not from this. There may be different versions of the test, but I got spanked. Seemed like it pertained more directly to the SRND guides...

In this exam any lab ?

Exam is good. I sat last week.

Some questions are incorrect. You must validate the answers.
Question 3 and Question 102 are duplicate

Question 3
Which definition is included in a Cisco UC on UCS TRC?
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#UC_on_UCS_Tested_Reference_Configurations

What does a TRC definition include?
Definition of server model and local components (CPU, RAM, adapters, local storage) at the orderable part number level. (D)
Required RAID configuration (e.g. RAID5, RAID10, etc.) - including battery backup cache or SuperCap - when the TRC uses DAS storage
Guidance on hardware installation and basic setup

Configuration of Virtual-to-physical network interface mapping is design-dependent and not included in TRC definition. (B)
Configuration of adapters (such as Cisco VIC, 3rd-party CNA / NIC / HBA) is design-dependent and not included in TRC definition. (E)
Configuration settings or step by step procedures for hardware BIOS, firmware, drivers, RAID setup are not included (C)

Design, installation and configuration of external hardware is not included in TRC definition, such as
Storage arrays (such as those from EMC, NetApp or other vendors) (A)

Question 102
Which definition is included in a Cisco UC on UCS TRC?

What does a TRC definition include?
Definition of server model and local components (CPU, RAM, adapters, local storage) at the orderable part number level. (NOT E)
Required RAID configuration (e.g. RAID5, RAID10, etc.) - including battery backup cache or SuperCap - when the TRC uses DAS storage (A)
Guidance on hardware installation and basic setup

Configuration of Virtual-to-physical network interface mapping is design-dependent and not included in TRC definition. (B)
Configuration of adapters (such as Cisco VIC, 3rd-party CNA / NIC / HBA) is design-dependent and not included in TRC definition.
Configuration settings or step by step procedures for hardware BIOS, firmware, drivers, RAID setup are not included (C)

Design, installation and configuration of external hardware is not included in TRC definition, such as
Storage arrays (such as those from EMC, NetApp or other vendors)
Configuration settings, patch recommendations or step by step procedures for VMware software are not included in TRC definition. (D)

Does anyone know if the dump is valid ?

can anyone who appeared in the exam let us know if this dump are valid ones?

Same thing, some answer seems wrong

Are this dump valid?

The file is corrupt...could you please upload again?

How accurate this dump is?

file corrupt...please load again.

Hi,
Is it a valid dump and cover all questions on that exam?
Regards,
Mesut

Anyone passed ccie collaboration written with this dump.

Please comment of send the link for latest dump.

Is it valid?

Has anybody tried it?

This question'S answer is wrong. It must be "A". by the way there are 2 same questions

What does a TRC definition include?
##Definition of server model and local components (CPU, RAM, adapters, local storage) at the orderable part number level.

##Required RAID configuration (e.g. RAID5, RAID10, etc.) - including battery backup cache or SuperCap - when the TRC uses DAS storage

##Guidance on hardware installation and basic setup (e.g. click here). ##Click here for detailed Cisco UCS server documentation regarding hardware configuration procedures.

##Configuration of Virtual-to-physical network interface mapping is design-dependent and not included in TRC definition.



Which definition is included in a Cisco UC on UCS TRC? (answ B)

A. required RAID configuration, when the TRC uses direct-attached storage
B. configuration of virtual-to-physical network interface mapping
C. step-by-step procedures for hardware BIOS, firmware, drivers, and RAID setup
D. configuration settings and patch recommendations for VMware software
E. server model and local components (CPU, RAM, adapters, local storage) by name only; part numbers are not included because they change over time

Can anyone who appeared lately let us all know if these are valid ones?