Pass Your Cisco 100-101 Exam Easy!

Get valid latest dumps @ http://pastpapers-library.blogspot.com/p/blog-page_18.html

I am planning to write 100-101 ICND1. But using cisco packet tracer i am not able to practice IPv6 commands and configurations. How do i practice them?

Hi, How have you guys opened this file?
Do I need to buy exam simulator from Avanset?
Thanks

can u guy help with the complete durmp for ccna

exam A q 41. Correct answer is B i guess.

Exam A Q9:
why would he forward it out port fa0/6 only? the destination mac in there is not the one shows in the frame received.
it should flood the frame through all ports besides the source port fa0/3 - E.

Does the CCENT 100-101 exam have any simulations? Or is the dump sufficient to pass exam as is? Does the CCNA Routing and switching 200-201 have simulations or is the dump sufficient enough to pass exam? Thx

sunil

By the way, passed with a 9xx/1000 earlier today

Dump is valid. There were a few new OSPF questions and an OSPF Sim right off the bat. Thank you DrunkMonk and all who contributed to this file.

Hi all. I'm planning to do Cisco. And so far the dump looks interesting with the diagrams. Otherwise i need to know, where can i get Software to do practical on and a guide to the course. Your response will be highly appreciated

Question 8:

Answer is correct. The Destination MAC address should be different than any given in the mac-address-table. Then answer D is valid and as should be.

Dump Valid 100% passed 1000/1000 last night 20/7/2013 some new Ospf question and the new ospf lab you really need to know your stuff probley bec what alex said is right but not in the right order so understand the concept and practice and you will pass the exam easily

I didn't mean to upset anyone that was seriously into networking. I 100% agree with you guys i'm not a network engineer but i'm a system engineer, I just didn't want to discourage the people from taking this test re-thinking and over studying because the dumps wouldn't allow them to pass. I 100% agree that in the networking field (getting a job) if you don't understand the concepts you will not make it far. My review was suppose to be directed towards the test itself stating that you more then likely could pass the test like i did just by studying the dumps and yes you will need to know the concepts to get a real job.

Mark, it is not mainly about passing a test. You could just have luck and pass it.without knowing anything It can happen but it doesnt help you further in real life. Cisco cert is just a pape it doesnt guarantee any job. I think you are an young guy .as you grow up you ll see things different.

Mark, it's called PERSONAL PRIDE.

If you want to just be a dumbass cheat and memorise the questions, fine. You'll get shown up in your job.

I studied for a while and practiced on Packet Tracer. Learnt all the concepts and understood them.

I took these dumps and was hitting 85% first time. I have a genuine passion for networking.

Not sure why everyone is saying must understand the concepts fully i study the dumps for about 4 hours with lil networking experience and took this and passed with a 900. thanks for the dump!

I trully believe that if you study JUST Cbt Nuggets and have home lab is very easy to get at least ICND1. Gns3 at this level works just fine. The way I see gns3 . it is like renting a remote lab. you don't have that touch. it is very important to see the actual ports. the connections between routers. the LED's lighting up.
for example i recently bought a router that had the older config. with this ocassion I HAD to learn how to bypass the password requirement. then . it tried to "see" ipv6 working and ospf propagation. my old image didnt support ipv6 so i HAD to learn how to change the ios image and all that. i think real lab is very important because you learn LOTS of stuff on the go.

Now, i am not sure which one is easier the old ICND2 or the new one???

The ospf lab is very very easy if you understand the very basic of ospf. All you need to know is that HELLO timers have to be the same and that router id have to be unique on each router within the same area. Also you need to know the default hello timer and the very basic show commands and of course you need to make sure there is layer1 and layer2 functionality before you troubleshoot layer 3(ospf). If you don't know those easy things there is not point in being certified. The goal is to be ready to get a job to have the knowledge for it. The cisco ceritification is worth nothing w/o knowledge to back it up.

passed yesterday 960 / 1000
Dump is still valid but There are about 4 or 5 OSPF new questions
i got 3 sim which included in this dump + the one that @alex talked about
" you saved me man thanks a lot "
you have to understand the concepts not memorize the questions only

Passed

Dumps are valid. There are some OSPF questions and I did get the OSPF troubleshooting simulation.

However, I have studied this part time over a year. UNDERSTAND THE CONCEPTS!!!

I'm taking my exam today. 19th July, so will post after exam for update.

I just passed with 986 the 100-101. Dump is 100% valid with same questions but sometimes different values. It had one new major lab that you can't find in the dumps. It is a topology with 6 routers and 2 switches running ospf. It is all about troubleshooting but it is very basic one. I can't remember the topology but i scored 100% at it. All 5 questions from this LAB were about reasons for which two routers does not form neighbours. The answers were same router ID on router R3 and R6, R3 and R4 where in different area, R3 si R5 had different HELLO timer , R5 didn't have a password set and could not for neighbour with R2. I will try later to remember the topology.
If you study cbt nuggets alone you can succeed because all topic are there. Don't try to learn the questions but to understand them.

Hi
Is this dump is enough? I will do the exam with these coming days.

Please advise.

hey all i booked my exam for the comming saturday and i was intrested to know from where to study the labs the one included in this dump or 9tut.com

@deyaa you're right, in this dump 2 similar questions have the exhibit wrongly swapped

Check this question. it should be fa0/6 no right answer they are all wrong
Please confirm

http://imageshack.us/f/22/10uu.png/

hi
I want to ask about Q33 SectionB. the answer is C.
I think it should be B. cause hub is just in layer 1 workin.

@thereisnogod, This Dump is 100% valid, all the questions came from this dump, but some of the anwsers are wrong in this dump, so refer all the 4 dumps in 100-101, i mean (Cristiano 102q.vce, Peyton 136q.vce, MuTe 100q.vce, drunkmonk 117q.vce), all the 4 dumps have same questions, but wrong anwsers have been rectified. Enjoy.

hey Jegan Nath - take a look at some of the more recent comments. i think may answer your question - the dumpa are pretty accurate

Just took the 100-101, (45 min ago 947/1000) use this vce and the drunkmonk vce they are good to go. Also used 9tut.net no Ipv6 questions, 2 DND, 2 Labs, one PAT question. July 12, 2013

Sorry, i took 100-101, typo mistake.

Hi All, I took 200-101 exam this morning and scored 973/1000, total 50 Questions (3 DND and 2 Simulations) i prepared with CBT Nuggets, 9tut, and examcollection (drunkmonk.117q.vce), i referred with all the 4 dumps which is in 100-101 in examcollection.com, i would like to thank drunkmonk for creating this dump, all the questions came from this dump, igot 3 DnD, 2 Simulation which is in 9tut , 1 from http://www.9tut.net/icnd1/labsim/show-configuration-sim#more-20 and another simulation which is in the dump itself, again i would like to thanks drunkmonk, now I will step in to 200-101.

@n00b the same sims this dump includes. no Qs on ipv6 and there was one question on PAT, and one DnD question on NAT.

All hale to the drunkmunk! 100% right on used this and 9tut

@VK what sims did you get? Were there any questions on IPv6 and NAT/PAT?

I will be taking it tomorrow about 24 hours from now I will post afterwards to keep everyone in the loop. Are there any good ICND2 200-202 vce ready and to go?

100% valid. passed yesterday with 986

@drunkmonk, 100-101 exam contains IPv6 topics, but i am not able to find any questions related to IPv6 in this dump ? is this dump really valid ? Please advise.

Still valid, passed with 947 today.

Will be taking the test to see how valid it is. Wish the creator wouldn't have messed with the drag and drop.Otherwise, thanks

TO EVERYONE,

THIS IS THE 1st lab, http://www.9tut.net/icnd1/labsim/show-configuration-sim#more-20 .

but where is the 2nd lab ?????????????
HELP PLEASE ? .

@ Drunkmonk

can you please tell me about your 200-101 Dump. I posted question on that section but it was deleted .

Thanks

@darkcloudx it seems my last post got deleted so let me put it another way, if you are unable to find the content here then you will struggle with the exam!

I didn't see none of the updated material for the ICND1 100-101 exam here.

@darkcloudx, yes these are the questions from the new 100-101 exam.

@Interested, there are two possible lab sims both with 4 questions. If you were to get both sims like I did then you would not be answering 8 questions, quite possibly a fail. Anyway the sims are easy, just need to know show commands, check 9tut.com for more info on the 2 sims.

are these questions from the 100-101 exam or from the 640-802 exam

@Arbazz any idea How many Points does the Lab Questions take!!
could i pass the Exam by Skipping the Lab Questions

I just passed this exam today with 960 Marks. All the questions are valid from this dump. I didnt get any drag and drop only 1 lab came in for me
http://www.9tut.net/icnd1/labsim/show-configuration-sim#more-20
version 2 of icnd 1 is alotttt easier than icnd version 1.
good luck

I did the exam 28th and every single question was from this dump. 40 multiple choice, 2 drag and drops and both the lab sims (4 questions each). But like I said some of the lab sim questions had different answers so make sure you use the show commands and check them.
I passed with 960!
Good luck!

@Mikin..what was you passing score and what would you say about the dump is this valid???? and did all the questions come from this ?

Thanks

@drunkmonk: +1 for me
the speed was set to 1544 not 512
Before exam do not be lazy, find 22 hours to complete CBTNuggets ICND1 100-101 and parts 1-8, 20-22 from CBTNuggets ICND2 200-101.

Be aware of the lab sims, when I took the exam the speed was set to 1544 not 512!

Thank you, everyone, for taking the time to post the dump and make corrections! I'm about to take the 100-101 tomorrow. I'm surprised by the relative lack of questions about IPv6, OSPF, NAT, etc. Cisco made a big deal about adding this material to the new ICND1, but the dumps that I've seen here don't emphasize these topics as much as I thought they would.

great dump Exam C Q7 : no answer display, is it normal ?

This dump is definitely valid. There are a few issues with some questions, so check other comments for those. I passed with a 933, primarily from studying this.

@Rizzle: Congratulation. What is your next step?

passed with 927 today. dump is 100% valid.

@Mikin, yes all questions i had on the exam came from this dump. I've posted my own version of this dump here to with the wrong answers corrected. I only used this dump to pass the exam.

@Rizzle: You are right if Host A have send some packets before to GW or through GW.
The logic is:
I am host A and want to send packet to host which is not in my network, then I have to send it to my default GW or GW to destination network. GW is 192.168.0.1 and is part of my network. HELLO GW, WHERE ARE YOU? I KNOW YOUR IP and GIVE ME YOUR MAC PLEASE. (it means Host A have to send ARP request for ff-ff-ff-ff-ff-ff to find GW).
PS: Which city do you live?

Question 5
Host A is sending a packet to Host B for the first time. What destination MAC address will Host A use in the ARP request?

Answer says E. ff-ff-ff-ff-ff-ff

Since Host B is on a different network, shouldn't Host A automatically recognise this, and put the MAC Address of the Router in it's destination MAC address field to forward the packets?

Congrats MuTe!

I hope this is a valid dump for 100-101; I've had a look at the recent 640-822 exam dumps and it feels like there is a lot of stuff is not covered in 100-101, so I can't use those to study.

I will report back tomorrow on how accurate the dump is here in Aus.

@MuTe is it means that on my exam on this Saturday will be 50 questions exactly from this dump 117q?

Just passed the exam 30 minutes ago with a 920 score. Could have scored 1000 but chose not to. This dump is valid, but i did change the wrong answers in the vce according to the comments below.

50 questions. 804 passing score. 2 lab sims that are also in this vce. 4 multiple choise questions per lab sim. Can be answered using only the show command. No configuration required. no IPv6 either. Only had 1 drag and drop question.

Taking exam 25-06. Learned this exam and the 200-120 vce. And watched all the nuggets. Will report if this is valid.

taking the 100-101 exam 27/6 in australia. will report back on it's validity.

@Mikin a leased line is typically a dedicated, rented connected between routers. You rent these from a telecommunication company. It is popular here and a typical connection would be 1.544 Mbps.

@dhan219, thanks for pointing that out. The answer is: B E

Explanation

A group of access points connected to the same WLAN are known as an Extended Service Set (ESS). Within an ESS, a client can associate with any one of many access points that use the same Extended service set identifier (ESSID). It allows users to roam about an office without losing wireless connection -> B is correct.

Two APs operating near each other should be configured on different channels to avoid interference. There are fourteen channels defined in the IEEE 802.11b channel set. Each channel is 22MHz wide but there is only 5MHz channel separation so the channels are overlapped. Channels 1, 6 and 11 are most commonly used because they do not overlap as shown below:

sorry - Exam B, Q 37:

Exam A, Q 37:
What is "leased line attachment" to the Internet? Why it is serial interface? Is this type of the Internet connection so common in the USA?

great job drunkmonk

Exam C Q7 has no answer dislpayed

Thanks for verifying this dump devo, good to know it's valid. I'm compiling the 200-101 at the moment so expect to see it within the next week.

This dump is valid! I took the exam on 6/18 and 85% of the questions were there including the RIP question

@drunkmonk thank you anyway.
If somebody has 100-101 dump, please share it. I need practice because have to pass it 29/06 (Melbourne). Thanks.

Just so everyone knows I didn't create this dump from scratch, it's from www.braindumps.com. It says on the website that it is the 100-101 exam. I put this here hoping that someone who has taken the exam can verify it!

Is this dump for 100 -101 or 640 -822 because it has some wireless and RIP questions ???

Exam A, Q 27: Wrong answer!
BC instead of CD

@Mikin your correct, Question 8 I think answer B should read Fa0/6 instead of Fa0/3 and then be the correct answer otherwise there is no correct answer.
Question 9 should be E.

Exam A, Q 8 and 9: Wrong answers!!!
8: no one (should be It will forward the frame out port Fa0/6 only)
9: It will flood the frame out all ports except Fa0/3.