Pass Your Cisco 100-101 Exam Easy!

I just downloaded this dump and I already see one incorrect answer. Item 19 says "Which layer of the OSI model controls the reliability of communications between network devices using flow control, sequencing and acknowledgments?" It says the correct answer is Network layer, but it should be Transport.

Still about 90% valid. Study CBT nuggets, Classroom and VCE. Know how to troubleshoot OSPF issues using various commands i.e. show ip ospf, show ip ospf neighbors, show ip ospf neighbors detail, show ip protocols, show controllers to troubleshoot OSPF problems.

@Kamrul: Then why E: PoE is not considered. Thank you.

This dump is still useful, i gave my test today and almost all questions were from this dump file except 2 questions which were related to troubleshooting.

is this dump still valid ?

@Doglas I guess you have passed already :) but this can be helpful for others aswell. The Hierarchical internetworking model, or three-layer model, is a network design model first proposed by Cisco. It consists of:
1) Core layer
2) Distribution layer
3) Access layer

Switch features in the Access layer:
Port security
VLANs
Fast Ethernet/Gigabit Ethernet
Power over Ethernet (PoE)
Link aggregation
Quality of Service (QoS)

Therefore, I guess the right answer should be B & D. For more information please check http://www.ciscopath.com/content/61/

Dump is still valid. took exam 6/7 and passed. Only one new question but if you know the information than it is really easy

HI,

this is wrong guys. I gave a right answer.
[IMG]http://i59.tinypic.com/2qlfupg.png[/IMG]

Pass with a 867 just study hard and watch the question. Up next ccna

Hi
What is the correct options on following question?

Which two characteristics describe the access layer of the hierarchical network design model?

A: Layer 3 support
B: Port security
C: Redudant component
D: Vlans
E: PoE

I can see in this test they say A and B, but other test B and D.
Please help

Passed today with a score of 973/1000. Used this dump and
cristianos's dump. Will say this dump has about 95% of the questions I saw on the exam, also used Odoms book to prepare for the exam. Labsims were about troubleshooting OSPF and verifying info on routers with "show commands"

Just passed today w/ 890. Virtually every question on here was on the exam. My advice: study questions, OSPF, IPv4 subnetting and most importantly: KNOW YOUR SHOW COMMANDS!!!!! Some will be disabled on the sims and you will be screwed if you don't know alternate commands.

i really like the examscollection,thanks to all those that are posting these great dumps.

I just pass my exam today with 894 score. this dump still good to pass. but new lab question not included. Good luck!!

This dump is about 80% accurate. I passed this exam today.
Some questions about OSPF is not present in this dump.

Passed this morning 933/1000 Most questions were from this exam and the exam from SUSAN. BEWARE with the labs, dont press NEXT untill you answered all questions from the lab and then press NEXT. This did cost me my first lab and a perfect score :-(

Good dump but!! be aware of wrong answered questions:

1. Q55 - 172.16.2.1 - osfp router id highest loopback ip and then highest interface
2. Q51 fails the same rule 172.16.5.1
3. Q19 refers to TCP that is a transport layer protocol
4. Q68 wrong subnetting response
5. Q75 wrong subnetting response

Hope to get some feedback from others :)

this dump valid but some question is not here like ospf 4 question new

Passed today, dump is valid. Got 824/100. I by mistake skipped a Simulator and did not know subnetting as well as I should. KNOW YOUR SUBNETTING.

hi guys, i ve booked my test for 24th of April, can someone be kind enough to explain how to run the dump once i have downloaded it.
Many thanks

Hello from France
Thx passed today and had 947/1000!
This dump still valid.
Good luck all :) And road to INCD2 !

hello people I think we must all pass our testimony. I did my exam on the 10th of March and passsei with 894/1000 this dump is super validates were 50 questions in 120 minutes advise you to study very well the questions because they come in orders exchanged. good luck to those who take the exam

This dump is still valid, passed in 3/21 with score of 973

This dump is really good. Review 9tut material to ensure a good pass.

960+ today.....Study this and know that a couple of the questions are entered wrong (check the explanations and you will find the correct answers). 9tut, CBT Nuggets, and some lab equipment will get you through the exam.

Confirmed valid 3/18 in the U.S. This dump + Susan have all of the questions on the exam except about 2-3.

good - passed today with 973 - only 2 simulations missing (one about ospf, command show ip ospf interface to practice, and an easy one using subnetting) - I was surprised there was nothing about ip6 on mine

passed my exam wit 973 marks. I would say this dumps are not enought. u will get 80-85 percens.I would also recommend actual test exam. they have 2 simulation. u came in exam out of 4-5. do 9tut.com for simulation?

Passed today with a 920/1000. I studied this dump, as well as the 9tut resources. This dump is very valid.

Dump is good. Passed today with 933. Study this and 9tut.net.

Dumps are helpfull but still got to know this stuff to be a good troubleshooter later on. In 3 hours gonna do icnd1 exam. Thanks to team and 9tut. Good job. :-)

Hey Yasir, could you please give me more info on the OSPF sim questions u got, thanks

960 today.

Passed today 947/1000 on 10/03/2014.
Total 140 mins for 50 questions. Passing core is 804.
SIM is OSPF Neighbor, Show Configuration and Security Testlet for router and switch all from 9tut.net

scored 933 today, dump is still valid. also used v2014-01-06.by.SUSAN.124 in conjunction with this one. Answers where scambled on the exam but are correct.

I wrote the test yesterday - March 6th, 2014. This dump is 100% valid - passed with 960/1000. There were three simulation, no configuration required - just show commands. The 7 router/1 switch simulation found on 9tut was on it. You have to issue 'show ip ospf interface' to answer the question. The other two simulations were device security question, you have to identify the threats for a router and 1 switch...it is on this dump.

Thank for this dump!!

Hey my Cisco people:)! great news, passed ICND1 today with 960/1000 (06-03-2014) believe it or not I got 4 lab ques and 3 drag and drop! lol, I almost cried,but 98% of all questions came from these dumps. Remember guys the work must be done, not just cramming off these dumps because don't come back exactly the same. Thanks examcollection, ICND2 here I come !!

Is this valid? Would like to write this soon.

some dumps are saying B&C others are saying C&D, can some please verify.

Which two characteristics describe the access layer of the hierarchical network design model? (Choose two)

A. layer 3 support
B. port security
C. redundant components
D. VLANs
E. PoE

why there is not ipv6 questions? is this new ICND1 v2?

thanks

Is this dump still valid, if so what % ?
Keep up the good work guys for posting up these dumps, I think it gives a higher chance of gaining CCNA.
Thanks a million !

Hello, is this dump still valid? I am going to be writing the exam in a few days...please, someone let me know!

thanks to all for uploading all the dumps.

Is this dump still valid?

Is this Dump all you need or is the Nada 189 better? Which is most Valid?

I want to thank Examcollection for this helpful site and the people that post these great dumps. This dump is still valid in South Africa, I passed today with a score of 907. I did very bad with the lab questions, I could not log onto a router or switch to view the configuration .
What i learned when logging onto a switch or router use enable to get to privilege mode and use conf t to get to global mode. Could someone please explain to me the method of logging into a router or switch and view the configurations.

Is this Dump all you need or is the Nada 189 better? Which one should i study? which is must valid up to date dump?

I took the exam today and got e score 986/1000.all the questions were from the dumps here and sims in 9tut.net. there weren't any new questions.

Hi, is this dump still valid?
I Will write on Wednestay.
Best regards

took this in UK yesterday and sailed it. as someone else said no ipv6, a couple of the labs were different but the same faults area id mismatch etc, know your subnetting and show ip ospf etc and you're good, cheers examcollection!

hi friends this exam will be that this is still valid, I want to do my exam next week who has the last garbage? please help me

hey guys, awaiting the latest dump from you all, from what im reading I understand that the exam is changing questions yet again, does anyone have an idea when new dumps will be posted?

wats new on the labs

thank you

the labs changed its about 70%

is this still valid.pls advice im writing Friday

Is this dump still valid? Congrats to your gf student!. I am told that cisco is constantly updating there exam pool and planning to take first exam at months end. Comments from anyone who most recently took the exam will be appreciated on making mention on its validity. Thanks

very good process

No IPv6 questions on this dump and the other ones you've uploaded? Hmm..

Q19 is wrong, the answer is transport as describe in the explanation.

This dump is about 95-100% accurate according to my girlfriend! she did the exam this morning (12-02-14` 10:30am) she got a score of 907 after using this dump alone for a few days. There was also 3 labs, one of which she saw on the 9tut site and the 2 were new ones, all being OSPF and asking for basically show commands.
She sends her thanks examcollection, keep up the fantastic work with keeping these dumps up to date.

How valid is this dump, how many sim ques did anyone get on there examz from this dump?

very good process