Pass Your Cisco 200-101 Exam Easy!

this dump is 100% valid....passed with flying color...one new eigrp lab...

9tut for lab? what is it? any explanation?

What labs did you guys get for those of you who have just taken and passed the exam?

Dump is still valid. Just passed with a 938/1000. Only saw one new question. Watch out for the EIGRP simulation. I didnt see this sim on this VCE, 9tut or examtut.

CCNA> What 29 question are you talking about? Are you referring to question #29 or a VCE dump with that number of questions?

Pass today w/ a 986... this is valid

i passed the exam today with 986/1000
this dump still valid
and 9tut for lab

Response to Chad:

Correct answer for this question is neighbours will form and R2 will receive routing updates from R1. However, when R2 references a route not in its routing table a loop will occur as it will send the packet back to itself. I have labed it up in GNS3 I recommend the same for you. Best to see it first hand.

Router processor is only locally significant but area numbers must match.

Thanks

This dump is valid. SIMs/Testlet included EIGRP, Frame Relay and OSPF toplology. EIGRP sim is not in this dump but very easy. You just need relevant show commands.

There are some Netflow and GLBP questions which are on examtut.

This DUMP will grantee pass. Thanks NADA.

Got 986 out of 1000. Go for it guys!!!!!!

Passed with 902. Dump valid but a few new questions.

wen is the exam pool changing.is this still valid im writting tommorrow

985/1000. This is a valid dump to use. I had the EIGRP lab as well as the OSPF lab. Two different drag and drops. Be aware that the answers might be in a different position.

killed ICND2 today 986/1000. F the Ronboot vce, use Nada vce: Download Cisco.Test-inside.200-101.v2014-02-10.by.Nada.120q.vce And get that stupid 29 question. The eigrp sim and the Dubi sim showed up, non-config. Dubi sim numbers were different so know why the answers were the answers. multiple choice are 100% from the NADA vce but orders were different. got 1 drag and drop (DTE, PVC, DLCI, LMI) EIGRP sim with the only new items. know all your show cmd, don't sweat it. even if miss all 4 EIGRP sim question, you'll pass.

The question about: If required, what password should be configured on Southisland router in branch office to allow connection to be established with Dubai Router? the answer should be "Secret"... cuz it is a PPP connection and PPP connetions require password. As you yourself showed in the Answer too that Username is Southislands and Password Secret...
Your answer is: No password is required its wrong !!

I'm confused by question 39 of this exam and was wondering if anyone could answer it. It says "Assume that all of the router interfaces are operational and configured correctly. How will router R2 be affected by the configuration of R1 that is shown in the exhibit?" Then it has a diagram of 3 routers with various networks coming off them, but R1 and R2 are in the same OSPF area, area 0. According to this exam it says the correct answer is "Router R2 will not form a neighbor relationship with R1" It gives the reason for this saying that the provided configuration in the exhibit puts R1 in Area 1 not 0 from the command #router ospf 1. but it then lists all the network statements as area 0. This seems like an incorrect answer to me, anyone have any insight into this?

This dump is 100% valid, 973/1000

1000/1000 !!!!!
This dump is 95% valid. Pay attention to big EIGRP lab (6 x router, 2 x switch). Questions can differ. My friend had another portion of questions. Good preparation for this exam = 9tut.com, NADA.120q , and CCNA questions for completeness LUSI.272q or GILLBEAST.299q = success. However to be great IT guy you must go through Official Cert Guide Cisco CCNA Routing and Switching ICND2 200-101.
Thanks to NADA!!!

Nice dump, watch out for EIGR lab, a couple of more Netflow questions (1- command to check out netflow status "sh ip flow export" and Feature that would report traffic stats "Netflow"). Apart from these, all current question are covered on this dump.

is this still valid im writting on satuday

Dump is still valid. EIGRP sim and Frame relay sim. Show commands were all that were needed. Good luck!

@Questionable Questions

default violation mode is shutdown which will generate an SNMP message as will restrict, only protected (not default) will not generate this message

if there is no port-security violation line assume it is in shutdown

about Q39,

R1 and R2 are on the picture both in OSPF Area0, no indication R2 is not.

but still the awnser is: not neighboring.

and why is this link in the explanation between ''router OSPF1 and area 0, the OSPF proces das not mather to the area, you can have multiple processes running in an area or even on 1 router.

can anyone tell me the logic behind this?

Real quick question. The following configuration is applied to a Layer 2 Switch (choose two)

interface fastethernet0/4
switchport mode access
switchport port-security
switchport port-security mac-address 0000.1111.1111 switchport port-security maximum 2
switchport port-security

What is the result of the above configuration?

It states the switch can send a SNMP message to the network management station but wouldn't switchport port-security violation restrict have to be set for that answer to be correct?

What happend with the old Sims who placed in some older VCE`s? Are they invalid now?

Passed today with score 986. This dump is 100% valid, just three new questions regarding netflow and eigrp. Thank you, Nada!

Victoris go on this web site

http://www.avanset.com/products/visual-certexam-suite.html

download the VNC program, type it in google

Please, can someone tell me how to open these .VCE files.

Nada your collecion is the best, they also have explanations its not just to memorise but also to have more understanding, thank you.....

Anyone onow how reliable this current one is?

Is this dump valide? I very trust Nada but just to be shure! thx

983/1000
I learned from this dump and 9tut.com The dump valid.
I had 5-7 new question which is not in it.
In the exam there was no LAB task, only 3 topology task (2 in the dump)