Pass Your Citrix 1Y0-A19 Exam Easy!

Hello guys. do you need to attend citrix training before you can take the exam

Dump is good enough to pass. Update with Alcaraz responses except for B 10 - that is still D, and D 15 - Mirroring, VM, Clustering, Rebuild.

Thanks everyone.

Passed a few days ago 90%

This dump is partially valid. See below changes.
Citrix.itexamfox.1Y0-A19.v2013-07-28.by.XenGuy.90q.vce says:

A12 Correct Answer = B
A17 Correct Answer = D
A19 Correct Answer = D

B7 Correct Answer = D
B10 Correct Answer = B

C11 Correct Answer = B

D1 Correct Answer = BC
D15 Correct Answer = Virtual Machine, Clustering, Mirroring, Rebuild the database
D20 Correct Answer = C

thaks for all!!

Prepared the last week with this one and scored 94% going through Citrix.itexamfox.1Y0-A19.v2013-07-28.by.XenGuy.90q.vce a couple of times.

Still valid in Dublin, Ireland, just passed with 80%, a few new questions, but overall pretty much the same, many thanks.

This is valid and all questions from this dumps.

Valid in South Africa!

100% valid. At least 4 answers are wrong though.

I passed with 78% today.

This is valid. Be aware that the power management drag and drop question is based on the old version and it doesn't really line up with whats in 5.6 (when I went back and tried it myself). Also had a new question that showed you a screen shot and asked why the desktop had hung. Must have guessed that one wrong.

Scored 92%

Valid 95% of 53 questions. Crammed night before got 85% many thanks

Valid 92% 52 questions. The 8% wrong is due to the incorrect answers provided in the dump.

Location of multiple choice is idencital.

Is this exam still valid have the exam tomorrow morning?

can someone tell me how to prepare for this exam I mean any official book for this very certification help needed Kindly someone

REGARDS AND Best WISHES

Valid. Passed 92%

Just done with the exam yesterday. Passed with 90%. 70% of Questions from the dump & 30% are the new including drag and drop. Give a read on power management, VDisk update and assignment. Best of Luck and Thanks.

Passed with 86%
All drag and drop q are exactly the same and 90% are valid . Need to pay attention on Pre-install requirements section.good luck all!!

3. An administrator has installed Provisioning Services in a XenDesktop environment in which DHCP and PXE run on the same server.

Which action should the administrator take to ensure that the target device will acquire the boot file?

A. Verify that the TFTP service is running
B. Add an option tag to the DHCP configuration
C.Ensure that the Citnx tools for virtual machines are installed
D.Provide boot devices through the Manage Boot Devices Utility

Answer: B

4. An administrator set up a XenDesktop environment so that the organizational unit (OU) of the farm is in a domain in which domain controllers are located in several Microsoft Active Directory sites Now several virtual machines fail to register with the Desktop Delivery Controller What could cause the desktops to be unavailable for user connections?

A. The newly created OU has not replicated around Microsoft Active Directory

B. The administrator created the OU for the farm in the wrong Microsoft Active Directory site

C. The computer account for the virtual desktop has not synched with Microsoft Active Directory

D. The administrator did not set up Microsoft Actrve Directory using the Active Directory Configuration Wizard
Answer: A

5. An administrator is creating a virtual machine (VM) for a XenDesktop environment and needs to specify a farm for the VM. In which two places can the administrator specify the farm? (Choose two)

A. The properties of the desired farm

B. The New VM wizard used to create the VM

C. The Desktop Delivery Controller Farm GUID policy

D. The installation process of the Virtual Desktop Agent

Answer: CD

An administrator needs to ensure that when user desktops are not in use at busy times of the day, they are added back into the idle pool. How should the administrator accomplish this task?

A. Set 'When logged off' to ten minutes/shutdown under 'During peak hour'.
B. Set 'When disconnected' to five minutes/suspend under 'During peak hours'.
C.Set 'When logged off' to twenty minutes/shutdown under 'During off-peak hours'.
D.Set 'When disconnected' to fifteen minutes/suspend under 'During off-peak hours'.

Ans: A - Explaination: If the target device suspended then it cant go back to idle pool till adminstrator manually reset the device from hypervisor. The scenario will not work if there are more desktops. So option A would be the correct one.
_________________________

Some New Questions:

1. Which server hardware requirements must an administrator consider when setting up a resource pool for a XenDesktop environment?

A. Local disk type and size
B. CPU vendor and version
C. Network speed and chipset
D. Graphics card vendor and memory

Answer: B

2. A user is attempting to access a virtual deskop The Web interface sent an .ICA file, but no ICA connection was established Which component of the XenDeskop architecture has failed to communicate with the virtual desktop?
A.DataStore
B.Desktop Receiver
C.Virtual Desktop Agent
D.Desktop Delivery Controller
Answer: B

I'll take an exam on Fri evening HK time, god bless!

Passed today. All 52 questions came from this dump, however beware that some of the answers are wrong. I got 92%. Area that needs to be looked at and corrected are the questions for "identifying Pre-install requirements" as this was the lowest scored. I would say that up to 5 questions are wrong out of the 85. Good luck.

dump is valid.passed today with 92%, passing is 63%, total questions 52.
3-4 QA are wrong though.all 98% came from this dump.

I haven't took the exam yet. Scheduled on 22nd this month. Any one have any idea on the topic from which some new questions are asked!!

dimesh can you let us know how the exam goes? Also I take it this exam is still valid?

Hi,
Any idea on which topic(s) the new questions are from. I scheduled my exam this weekend.Cheers!!

Also found one, but not confirmed yet.

Which of the following choices can be the reason a Virtual Desktop Agent does not register with the Controller? (Choose 4)

a The virtual desktop is not added to the correct site
b DNS is not properly configured
c Time synchronization is not properly configured
d Multiple network adapters on the target device
e Multiple network adapters on the virtual desktop
f Microsoft's WINS name service is implemented in the environment

Ans : A, B, C, E

Scenario: An administrator configured a master virtual machine and created a pooled catalog with a desktop group. The administrator discovered that antivirus software was not installed on the master virtual machine. How would the administrator update the image pool to include antivirus software for the pooled desktops with the least amount of administrative effort?

A - Recreate the master virtual machine and install the antivirus software.

B - Install the antivirus software on the master virtual machine, then update the catalog.

C - Convert the master virtual machine to a template and install antivirus software on the template.

D - Install the antivirus software on the master virtual machine, take a snapshot of the virtual machine and assign the snapshot to the catalog.

Answer : D

Guys this paper is still valid, but there are multiple new questions including 03 drag and drop. Out of 52 questions I found 8-10 new questions. Please study and then try. I passed today with 90%

Anyone can share what the new questions relates to so that everyone can pay attention on it.

Cheers
(Constructive one - pls don't delete this post)

This test is valid but not 100% yesterday I approved it with 76%, the display or simuacion questions are not the same for the rest are all the same

Still valid.total.5-6 new questions.
Completly new questions with drag and drops.
Newer seen them before
But if you done your homework, you gonna make it. :0)

Passed today! Almost all questions from this dump. The two exhibits were different. Thank you!

Thanks Samson

Damian Kel ,

As far as I know it's 63 out of 100, and I'm planned to take this withing 2 week's time

good luck

Hi guys, what is the percentage pass rate to pass out of 100% and how many questions do you get on the exam?

Valid with 3 new questions, passed with 86 %

Thanks XebGuy, your questions helped. Still study the material

passed with 90% in India. All questions came from it.

PASS with 87% from Chile

Valid with few new question, passed with 86 %

I passed this exam today in KSA 76%. around 8 new questions. the two java questions are replaced by new one so study well and good luck

Very valid, pass today with 88% in Dublin. A few new questions but not complicated.

Just passed today in US. 88%

5/9/2013 vaild passed with 86% about 6 questions on exam that are not on the study guide

Just passed with 92%. All questions on this test are on exam, some wrong answer though.

Still valid - passed today with 90%

Hello,

I downloaded this vce and read it through. Just a bit bewildered if users were passing the test on the answers alone or the answers given by Xenguy in the descriptions?

Nothing worse than having two answers and not knowing which is the correct one?

Cheers

Passed today with 84%.

Valid for Romania.

Passed 4/23/2013 88%. Definitely valid.

Passed today 92%

Passed today 92%

Poland. Passed today 90%. 52 questions and 6-7 NEW (included 2 new drag&drop). If you are XD administrator you will pass it without any problem.

Dump still valid. Passed with 84% 2day. All question from this dump

Exam A Q20 does not seem correct at all.

Which administrative role provides the minimum permissions necessary to allow an administrator to monitor a XenDesktop environment?

The correct answer in this exam says "C. Read-Only Administrator" but in reality a "Assignment Administrator" can allow an Administrator to monitor a XenDesktop environment.

The multiple choice options don't even have the correct answer as an option. Read-only Administrator is incorrect.

76% valid

Valid in USA. 52 questions all out of this dump (it will get you a 90% correct).

That said, get hands on experience. Install a PoC using Quick Deploy and you will be prepared for any new question.

lhttp://support.citrix.com/servlet/KbServlet/download/25573-102-666198/XenDesktop%205%20-%20QSG.pdf

This one is valid 880

Not valid.many questions are changed.

Passed today 4/6/13 with 92%

This dump is partially valid, many questions from this dump (maybe ~70%). I do highly recommend extra preparation. With minimal experience, I think I was able a whole bunch of unknown questions correctly anyway. Passed today with 80%.

Hello everybody,
Could any one please advice me wich is the best study guide I need to buy to prepare successfully for this exam (1Y0-A19)?
Thanks a lot!

No more valid. .Failed today.

Not valid.many new questions..

Failed today with 55 %, many new questions

Test is valid took on 3-27-2013 got a 92%

Is it valid in India. Kindly confirm!! going to give the exam next week

Dump still valid, 3-4 new questions though but easy enough to answer from experience.

Passed with 88% on 4/3/2013..Its valid

Passed in the US with 96%. Completely valid.

Passed 04/03/13 with 92%. Best advice is to validate all of the answers in this dump yourself using your home lab of course.

passed today. Valid. thanks! %90 all from this dump.

the dum is valid in india.only 3 questions ( including 2 drag & drops ) are diffrent from the dump. I done the exam on 23-02-2013..all the best guys

its 17000/-

Passed with 90%.. still valid.. Thanks guys.

i passed today in Switzerland with 92%. Exactly the same questions. :-)

Passed this morning with 90% correct.
No new questions.
Colorado, USA

Hi, in Germany I have passed with 88% to learn with this vce

Hi I'm a little confused about the question asking what is the minimum number of servers on each site to facilitate HA. I always thought it was 2,2 but 4,4 is noted as the answer. Is 4,4 the correct answer on the actual exam?

Many thanks
Shaun

Sorry I posted on the wrong Exam my apologies, have just downloaded yours, much better :D

Just a quick one, Exam A, Q10 is incorrect.

A User tried to connect to a desktop through the Citrix online plug-in, but the connection was unsuccessful. What could be the cause of this issue.

A. Port 2598 was closed
B. Port 3389 was closed
C. The Virtual desktop requires an SSL certificate
D. Antivirus software is preventing the connection.

I answered A, which to the best of my knowledge is correct but when reviewing my answers I had it wrong and it should have been B, however 3389 is only utilized when shadowing a session for remote assistance is it not?

My apologies if I am wrong on this one, just through I would bring it to your attention :)

Many Thanks
Stylee

Passed w/ 84% last week.
A few new questions not in this collection

WinRM ports question. Which 2 ports are required for WinRm version 1.1 and 2.0

I answered port 80 and 5985

Question on procedure to update a vDisk configured with automatic updates. You had to drag the steps in the correct order:

Steps (in order I placed them)

- Change vDisk from Standard to Private mode
- Install software or data
- Increment version number
- Change vDisk from Private to Standard mode
- Restart target device

Question on Power management settings for a Desktop group. Another drag and drop scenario but I cannot remember the steps.

still valid Passed today 90%

germany

I believe the answer is wrong for exam A Q18. The scenario states that the shared storage is assigned to the PVS "host", so we know that the PVS is a physical server and not a VM whithin Xenserver. If the PVS is down, answer C and D are out especialy since it asks for a solution not dependant of PVS.

Since answer B is not possible, the only remaining answer is A.

I might be wrong but that's how I understand the question.

Passed with 86% a

Valid. Passed today with 86%.

M from Europe, your answer are wrong. The correct answer for Exam B Q19 is C.
because, it said "An administrator created the Sales USB policy, wich ALLOWS CLIENT USB DEVICE REDIRECTION for the sales group".

passed today with 88%

Exam B Q19 - correct answer is D - Add Client USB device redirection rules to Sales USB Redirection Policy.

By default USB redirection is disabled ---> http://support.citrix.com/proddocs/topic/xendesktop-rho/ps-ref-policies-usb-devices.html

Passed today with 84% :)

XenGuy:

For the Exam B, Q12, here is a good knowledge base article that should be included in you next release -> http://support.citrix.com/article/CTX127388

I passed today with 86% today, had three new question. Two were drag and drop question based on the order of configuring power Management and automatic update of vDisk.

I passed today with 92% marks

The Dump is still valid in India, I passed today with 92% marks. There are some wrong answers, but still a good dump.

Clearly this is ambiguous.

Under XD 5.0 Flash URL blacklist is at:
ICA>Multimedia>HDX MediaStream for Flash (client side)

Under XD 5.5 Flash URL Compatilbity List is at:
ICA > Adobe Flash Delivery > Flash Redirection which the KB says is configured on the server.

Flash URL blacklist or compatibility list is a Flash server side setting (not client side.

http://support.citrix.com/proddocs/topic/xendesktop-rho/hd-flash-configure-server-ad.html