Hi everyone,
I have been really happy with the board.
e6400 at 3.20GHz. XP 64
Problem is that it occasionally just stops. Blanks out and reboots. It generally, but not always, happens when I an playing music while editing very large photoshop images.
This is rather annoying. It...
Heh. That is interesting. To review: From Device Manager select one of the Marvel Yukon controllers. From the advanced tab select speed and duplex. There is no gig setting available in the dropdown box. This is with version 8.27.3.3 of the driver (Im using XP64). Updating to 8.39.3.3 made...
Basically you're as fast as the slowest link. If you are running a 100Mbps hub/switch then the fastest speed for the connection will be 100Mbps. (I won't go into duplexing here) What comes out of your cable moden is likely 10 or 100Mbps. However your internal home network may be 100 or...
I recommend using the ICH7R for your stripes. My OS (XP64) does boot faster as I have it it in raid0. I didn't think gaming was generally disk intensive. Outside of loading the programs when you start them I don't think you'll see a gaming performance improvement with raid0. Spend your...
Whatever you use make sure you use a grounding strap too.
The OCZ platinum seem popular. I'm using Crucial Ballistix pc6400 and running an e6400 at 1:1 (3.2 ghz) :-)
What is REALLY important is that you test the memory and the memory slots. Do one at a time. Move memory that passed...
If you are running stock then Qfan is okay. If oyu are going to overclock it then disable all the Qfan bios stuff and run a copy of SpeedFan. Run speedfan at system startup.
(this assumes windows)
I dont know what the problem is. I ran SiSoftware Sandra for 6 hours today with no problems at all. I did a little reading and some XP64 users are going back to the basic memtest. The system is working great.
Phil: The latest BIOS 1506 allows you to overclock to 400. or more and seems to...
Here's a problem that is driving me crazy.
Memtest86+ freezes in the middle of test 5 when I run Dual 1gig ram.
I have tested each stick individually in thier own slot, and in other slots. A single stick can run for hours in any slot with no problems. I think this is a mobo / bios issue...
:D WOOT! :D 3204.00MHz on an E6400 (400.5 x 8)
BTW: This is going to be a 24/7 box for me.
Just burned in the system for 10 hours with 2x Prime 95. Here are the settings per CPU-Z
edited with comments too. Go the CPU-Z validator page to see the complete result.
Note vCore was...
:shocked: OMG I masochistically upgraded to 1506. Ouch! Ouch! All this for better 64bit OS memory usage?!?!?!!?!?
This info may be useful to the RAIDy folks.
System has 2 volumes RAID-0 on the Intel chip.
Lost the drive on the EZ_RAID1 port after flashing with 1506. An OS stripe...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.