Recent content by bables

B
Asrock 4CoreDual-SATA2

*cough-cough* The magic smoke! *kaff*
- bables
- Post #185
- Oct 13, 2007
- Forum: Motherboards
B
Asrock 4CoreDual-SATA2

Hey cool, thanks for the info on that. So after all that work getting up passed 3ghz, when I switched the ram the board didn't post and I smelled something burning... sigh... Now the board beeps continuously 3 long beeps. Switch the old ram back but nothing fixes it. Fans and everything...
- bables
- Post #182
- Oct 11, 2007
- Forum: Motherboards
B
Asrock 4CoreDual-SATA2

You're totally right, a diamond in the rough. It actually starts out of the box as a bit of a lump of coal, but after some polishing--tadaa. My mobo's starting to feel like a lump of coal again though. I put in some pc-6400 ddr2 ocz sticks and it won't post even after clearing the cmos. Is...
- bables
- Post #178
- Oct 10, 2007
- Forum: Motherboards
B
Asrock 4CoreDual-SATA2

Here are my bios settings, I've got 2g OCZ pc4000 EB Platinum, Radeon x800 AGP Bios 1.60 CPU Configuration CPU Host Frequency -- Manual Actual Frequency -- 320 PCIE Clock ? 100 MHz AGP/PCI Clock ? 66/33 Spread Spectrum ? Auto Boot Failure Guard ? Enabled Ratio Actual Value ? 10 Max...
- bables
- Post #175
- Oct 7, 2007
- Forum: Motherboards
B
Asrock 4CoreDual-SATA2

Woo hoo! Solved the 2.95ghz problem! It was a bad BSEL mod. When I wiped it off with acetone and redid it suddenly I can get passed 3Ghz. I totally covered the two pins in conductive ink this time and presto. Farfle was right, the BSEL mod makes this board relax and stop underclocking. I got...
- bables
- Post #174
- Oct 7, 2007
- Forum: Motherboards
B
Asrock 4CoreDual-SATA2

Man, just resolved some disasters there. I cleared the cmos, rebooted at stock and then suddenly winxp wouldn't start, was getting "ntldr is missing" instead. So then I kept getting this error until I overclocked to 2.4ghz, and presto winxp starts. So then in winxp I reflashed the bios to 1.60...
- bables
- Post #173
- Oct 7, 2007
- Forum: Motherboards
B
Asrock 4CoreDual-SATA2

enDings, are you running setfsb with all of its files unzipped in 1 directory? I have a SATA2 and when I try to use RTM866-485 it says pll error. :confused:
- bables
- Post #170
- Oct 7, 2007
- Forum: Motherboards
B
Asrock 4CoreDual-SATA2

Hello All, new to the forum but have been messing around with this wacky mobo for a week and have some tidbits to share. E4400 Asrock 4CoreDual-SATA2 2G OCZ PC4000 EB Platinum Radeon x800 CoolerMaster 600W PSU I actually started out with a 4CoreDual-VSTA but a screw got stuck under...
- bables
- Post #167
- Oct 7, 2007
- Forum: Motherboards

RESOURCES

Top Bottom