You only need acrylic for the front. You build the back out of poured concrete.
Go nuts like this d00dz :D
http://www.mr4000.com/
SCUBA gear for algae cleaning not included.
Catman2:
What do you have? Any frags you want to sell? Most of mine aren't ready to be fragged yet. I'm interested...
Quick google search and I found it:
http://www.altgarden.com/site/lightmovers/htmldocs/lightrail3.html
Figures its a hydroponics system.
Those coral prices sound like east coast prices. For that price, I'd just get them from Jeff's Exotic 9 for $99 deal. Even with shipping, it comes out to...
No I don't. I'll ask them when I go there again. I even looked at the manufacturer name on the system when I was there, but got too excited over the clams ($20 for Ultra's) that I forgot. :D
If you are in the San Francisco Bay area, check it out of at 6th avenue Aquarium. They are sort of a...
True true. I was only stating the rule of thumb since the posting didn't know what type of corals they will be keeping.
One of my local fish stored don't even bother with even lighting. They use one MH on a track system, that glides back and forth for some corals, and all their clams.
The...
Filter? Who uses those any more? :P Berlin method baby. :P A good protein skimmer, lots of live rock, a sump for your refigium if you want, but I like a Deep Sand Bed instead.
You can use ocean water, if can go five miles out and get it. The stuff along the coast is generally too polluted...
I've used one for acrylic tubing before, it worked pretty good.
I need one now for doing long bends on sheets, so from what I've been reading, this one seems to do it all. You can wrap the strip around odd pieces like rods, tubes etc. Leave it flat for straight bends. What I've been reading...
I needed a Strip Heater for beading and shaping Polycarbonates. Like making a cowl induction hood for a pc or something.
Any way, Craftics makes a consumer one for MSRP $30.86 for a 24" and $38.54 for a 36"
Strip Heater
Every place I looked seem to want more than MSRP for it.
I found them...
Hi All,
I need some suggestions.
I am not get any where near the FSB posted here. My board boots up and runs between FSB 140 to 145. Anything above that does not POST. I can get it to around 150, if I keep incrementing from the whatever the highest it will post at in 1 or 2 Mhz increments...
Thanks guys! Got me started. Found them on eb@y now that I know what I'm looking for. $50 for the cage, but even better one person has just the backplane for Gateway ALR's $10. Hoping it will work in my 6400
Hi all,
I'm finally getting out of the 1970's and building me a P4 system. Anyway, I couldn't decide between this board and the 850 asus board, since RDRAM1066 wasn't readily available and cost a fortune, I opted for this board.
System will be this board with a 1.8A with plans to go to a 533...
Okay, I'm going to break down raid some of these suckers. Anyone know where to get an SCA backplane, that will fit in a case not the rack mount chassis ones at a decent price? Doesn't have to be hot swap.
Hehhehe.. knowing what kind of DC makes a big difference.
Here is what you need to do for XP:
XP requires a registery edit to enable it to join a Samba domain HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\netlogon\parameters "RequireSignOrSeal"=dword:00000000 Also ensure you are running...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.