Ugh. Decided it was time to upgrade my + only Philips DVDRW228. Big mistake. Got the BTC drive in my box, installed it and immediately upgraded to the latest firmware, stuck in one of the TDK 4x -R's I bought with the drive, and... COASTER! That's not a good sign. I never burned a single coaster...
Well I meant the servers on that segment don't use SSL, so I've tried both ways, and nothing I'm wondering if it is something else, or if I have something screwed up how do I check to see if SSL is active or not?
That is the issue but the server can not even run a scan so how can it determine if a ip segment is using ssl. I haven't tried to disable ssl on the server.
everything installed and complied fine, after starting the daemon, as soon as you log in that is the error.
Anyone know what could cause this message.
Remote host is not using the good version of the Nessus communication protocol (1.2) or is tcpwrapped
I've looked at the nessusd.conf file and host file on Nessus, and I'm stumped.
I have a Miniq 760 and when I look at the pc health stats this is what I see for the voltage:
Voltage Sensor(s)
CPU Voltage : 1.52V
Aux Voltage : 1.79V
+3.3V Voltage : 3.33V
+5V Voltage : 4.95V
+12V Voltage : 12.16V
-12V Voltage : -13.19V ******
-5V Voltage : -5.10V
Standby Voltage : 5.09V...
I have a Miniq 760 and when I look at the pc health stats this is what I see for the voltage:
Voltage Sensor(s)
CPU Voltage : 1.52V
Aux Voltage : 1.79V
+3.3V Voltage : 3.33V
+5V Voltage : 4.95V
+12V Voltage : 12.16V
-12V Voltage : -13.19V ******
-5V Voltage : -5.10V
Standby Voltage : 5.09V...
Well I used the latest power strip and saw that the setting on the card but it's default are 400\300 that is rounded. I know I'm new at this but when it says engin and memory being 400\600 on the site but other tools tell me differently I'm wondering if I just don't understand or ATI lied...
I installed the latest drivers to a new setup and I was wondering anyone using XP and what does it say about thier video cards? Especially the new ATI cards 3dmark2003 says that the video card (as is in mine) is a 9600 series? While my 9500Pro actually says 9500pro, just wondering because the...
I've had mine up and running for over a month works great. I thought the hardest part was installing ram with the power supply right over it, I had to remove it just to add the ram.
I have a xp2100+ with 2X256 OCZ pc2700 ram, a 40 gb 7200rpm hard drive an iglou 2500 cooler and a ATI 9600 pro...
What version are you using, if you are using 10 or higher you can change the port on the (details) tab on the (connection info) and it will not affect the other remote hosts\clients. Have you thought about setting up a VPN and writing a filter to add all the IP's under 1 rule for more...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.