"I got pc133 ram so i'm thinking i could take this baby to 133mhz bus right?"
Maybe not. I got a couple of generic sticks of PC133 back in July which wouldn't do 133. Took me a while to figure that one out. If you know someone who has a system running at 133, try to borrow his RAM...
"the question is how can you reccomend a fan without knowing what kind of case and motherboard a person possessoces(sic)"
Seems to me that if you post a question in one of the forums, it is incumbent upon you to provide all necessary information. It never ceases to amaze me the lack...
The retail box says the chip is 2.0v chip??
What you have is a PPGA Celeron. It isn't going to 800. What you want is A FCPGA Celeron AKA Celeron 533A or a 566.
I can't find any reference to adjusting the core voltage.
If you get a Slotket card like the Abit Slotket!!! you can adjust the...
Let's see. You get a PIII 866 for about $350, and I just ordered a PIII 650 for $164. I set my FSB to 133 and I have the same processor as you do. Only difference is that your CPU is guaranteed to run at 866 and mine isn't.
Well, if mine doesn't I'll just take some of the money I saved and...
"I was looking at the stores web site and it said celeron 566 $109 and then Celeron II 600 $129. Isn't the 566 a celly II also. I thought evry thing above 533 was the new .18 chip or did the ad just read wrong?"
You probably read the add right, it's just that the add is wrong 'cause...
"I'm also using a big heatsink and fan"
"Also, I've already tried using thermal compound."
I'm not familiar with that brand of heatsink/fan. Sure sounds like it could be heat though. I've found that it's harder to get proper contact with the cumine CPUs than with the...
Bought 128MB Mushkin PC133 (Samsung G6) in December. Didn't get a chance to test it until yesterday with a CPU known to run at 133MHz. The Mushkin would not load Win98.
Called them this morning. They are sending a new 128 stick of the Mosel rev2 by overnight plus a prepaid FedEx mailer to...
Bought 128MB Mushkin PC133 (Samsung G6) in December. Didn't get a chance to test it until yesterday with a CPU known to run at 133MHz. The Mushkin would not load Win98.
Called them this morning. They are sending a new 128 stick of the Mosel rev2 by overnight plus a prepaid FedEx mailer to...
"What speeds can my board accept?"
AFAIK the BX6r2 will run any of the new Celerons. If you don't update the BIOS the CPU will be reported as something strange, but it will still run.
For overclocking the 533A or the 566 are your best bets.
Bill
"Where did you by your Abit Slotket and what did it run you?"
Sydekar:
If you were registered (with an email address) I might send you the source for cheap Abit Slotket!!!s. I don't like posting commercial sites in the forums.
Bill
"...leads me to believe that my BX6r2 will run AT LEAST 700MHz Cu-Mines at default. Can anyone verify this for me?"
Yes! Because I did it on a BX6r2 MB. It was a FC-PGA, not a slot 1.
"What's currently the best FC-PGA to Slot-1 adapter on the market with voltage...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.