Your drive also has the bottom cover?
Any vibration noise?
I don't see any problem since any moving parts will touch anything, but how about this kind of drive. Is it ok to screw it on a flat surface?
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136278
Is it ok to put the 2.5" hard drive on a tray for 3.5" which is flat so bottom of 2.5 drive will touch the tray?
The screw holes line up with 2.5" drive
This drive is a pull from laptop, so there is another layer of metal cover on the bottom of drive.
XXXX!
Accidently check teh boot drive during advaced testing, and it tried complete wipe on both drives.
I thought it was just aborted, but I couldn't start up Windows.
Found boot section and partition table are gone.
After long hours of work, managed to get important data back and...
Well, found the media files in the drive are freezing randomly, the incestant stop and go and keep clicking. Also it failed on Advanced test, full wipe of the drive.
By the way I only have two menus on the advanced test, Firmware update and full erase and both are not available or failed...
Well, oneday the drive disappeared from Win7 explorer, but appeared after reboot. Then some time later it started to make pretty loud clicking sound constantly.
I backed up the data in the drive and disconnected and forgot about the drive.
I found the drive in the case and checked the...
So it should be their covering their behind for possible incompatibility in dual channel chipsets.
I think running 1.65v is fine. Most of current 1600 rams run over 1.6v even if they are rated 1600 at 1.5v. There are tons of reports that users had to raise voltage to run the advertised rate...
Memory Model PXQ316G1866ELQK
http://www.frys.com/product/6934607?site=sa:adpages page:fri_p6
Same memory in Newegg for a lot more.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820220635
Fry's site doesn't indicates but it was indicated it is compatible only with X79 chipsets...
Heard Xigmatek Gaia is as good as CM 212 + at less weight and slimer body to clear ram slots. Also CM GeminII S524 looks good if someone prefer the style.
LOL, thought this is too big for your taste.
With no overclocking, I don't think your system really needs extra cooling from this type.
In smaller size.
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103084
How many sticks of ram are you going to install?
Even a HS with 92mm fan can block the nearest slot.
I also looking at Hyper TX3, probably it could clear all memory slots and you probably find
quieter fan too.
And this.
http://www.newegg.com/Product/Product.aspx?Item=N82E16835233081
What MSI?
I think my future board is identical at least on the area.
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128495
Can you put the ram you have on the picture to 4th slot with that setup?
And your ram stick's HS is placed little big higher than normal but without any...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.