My beloved Jeyi i9 GTR adapter has sadly died. I have three other rtl9210b adapters. This was my only rtl9210 adapter, and it had an E1 revision chip.
First it totally died. Then I took it out of the carrier and was able to get it working again, but then I noticed it was corrupting data...
Thanks for the tip!
I did a hexdump and looked at it. It's all binary goop so there isn't much to see, but sometimes there's interesting strings and other stuff that can give a hint.
The new firmware has the sting "INTEL SSDSCKGW" in it. This wasn't in the previous 1.29.38 firmware. Looks like...
In case anyone is looking for firmware for the rtl9210b, I found and tested a firmware download package from here:
https://station-drivers.com/index.php?option=com_remository&Itemid=353&func=select&id=634&lang=en...
I managed to figure out how to reset the SCSI_ fields for the rtl9210 firmware update flash tool. it might be possible to do this with the mini flash tool that is distributed by some vendors, but the most recent version hides what is needed.
Under Settings on the application pulldown menu...
Does anyone know how to set the SCSI_ settings for rtl9210 firmwares to null?
Like this:
SCSI_VENDOR = ""
SCSI_PRODUCT = ""
If you set these to nothing/null, the adapter passes through the info from the drive itself, which is very nice. I have one of my adapters already set to null from it's...
Hey everyone. I've previously written about my experiences with the rtl9210 adapters. Now I have a Sabrent EC-SNVE, which has an rtl9210b chip in it.
https://www.sabrent.com/product/EC-SNVE/usb-3-2-type-c-tool-free-enclosure-for-m-2-pcie-nvme-and-sata-ssds-ec-snve/...
This link is expired. Does anyone have a known source for rtl9210b firmware? I tried the firmware from Pluggable but it only has files for the regular version, not the b version.
I just had one of my rtl9210 drives fail a firmware update. It was going from FW Ver : 1.20.12 to FW Ver : 1.23.15.
The progress bar got to 14% and then stopped. After a minute it showed a fail message.
To fix I simply unplugged the device, plugged it back in, and pressed the update button...
Is that the A3 revision mentioned in the legitreviews article? Is it for sale yet? Does anyone know which adapters have it? Or is this just speculation?
Hey everyone. I was just checking out the updates on this thread today. I don't check in very often because I've not had any problems since I switched all of my adapters to rtl9210s. The rtl9210 adapters continue to work perfectly for me.
It sounds like there has been some updated firmware for...
That mirrors my experience with jms583 adapters. They need a lot of power, and putting any kind of USB extension cable in between is enough resistance that they will start acting flakey. I observed this behavior with both external USB 3 extension cables and front-side chassis ports which were...
Saw this review today. Looks like someone in the review industry has finally noticed what we already knew.
JMicron JMS583 – Controller Version Matters For Portable USB Drives
https://www.legitreviews.com/jmicron-jms583-controller-version-matters-for-portable-usb-drives_219422
I find it odd...
Like others have said, you can using Rufus, but it's not officially supported, and you gotta be careful about what drivers you install because it apparently can break if you carry it around between lots of computers.
I had never done it before about two months ago. It's pretty cool and easy to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.