With a new computer that I have just been using for a couple of weeks, today Windows gave me a BSOD with the error messages "Driver_State_Power_Failure."
The error code is 0x0000009f.
Before I made this thread, I looked online to see what I should do about it.
I checked the error with the...
Thanks for the tip.
I tried AOMEI Partition Assistant and it worked instantly to make the 4th primary partition on my USB stick.
I wonder why Windows 10 kept failing at doing that.
At least my USB problem is solved now though, so thank you.
My GPU is a 2080.
Yes, I did put the paste guard for AM5 over my CPU, before I applied the thermal paste.
I am using the mounting bars for AM5 that came in the D15 G2 box, set onto the -7mm offset holes.
When I applied the thermal paste, I tried to follow the Noctua instructions, and put one...
I have the standard version of D15 G2, set onto the -7mm offset holes on the mounting bars for AM5.
I used the whole tube of the Noctua thermal paste that came with my D15 G2.
As for temperatures under load: I don't know that yet. I didn't want to game before I get my fans straightened out...
I am using Windows 10 Disk Management to try to create 4 different primary partitions on a USB drive.
It always lets me create the first three partitions.
But then when I go to create the fourth primary partition, by creating a new simple volume in the exact same way as I did the first three...
My case fans are 6 140mms placed in their stock configuration.
That being:
3 Intakes seated vertically on the front of the case
2 fans seated horizontally, above the PSU, and below the graphics card area.
1 Rear Exhaust, seated vertically at the back of the case, in the same orientation as...
I built a new computer over the last week or so.
I am using an Antec Flux Pro case with both of the side panels currently removed, and all 6 of the stock fans are active.
I'm using a Noctua D15 G2 CPU cooler on an AMD 9800X3D CPU, and both of the CPU fans are active on the heatsink.
Over the...
Thanks for the feedback, Paperdock
Unfortunately, I don't have any spare coaxial cables laying around.
As for the optical output connections and signal type, I have no clue about that stuff. I don't know what the answer is.
I didn't set my Realtek to 5.1 or 7.1 or anything like that...
Today I ran a stopwatch to test how long it takes my system to boot into Windows.
In normal mode, it takes 5 minutes and 19 seconds before I am fully loaded into Windows and ready to surf the internet.
To pass the logon screen of Windows take about 3 minutes, but then more stuff is still...
The thing is, I had the exact same uber-slow boot times before moving the hard drive into the new computer.
So that's why I think that this particular problem isn't caused by the move to new hardware.
I didn't test the boot time in safe mode, but I will try that tomorrow.
I did install all...
I just booted up my new AsRock 870E Nova motherboard today.
And I noticed that the integrated RealTek audio on it is absolute garbage for me.
Before making this thread, I already have installed all of the latest motherboard and RealTek drivers from the AsRock website.
I ran an optical cable...
I just transplanted my old HDD into my new computer.
I've been using that HDD since probably 2016 or so. It's a WD Black.
On that HDD, I have recently ran every possible hardware diagnostic test, with various different software products, that I could find for free, and it always passes all of...
I took your advice, and I did not run Sysprep, and I just installed my old HDD into my new computer, and then it booted up with zero issues.
So that is great news! Hooray! I'm very happy about that. Thanks a lot for your help, I really appreciate it.
It still takes forever to boot though...
I am going to move my HDD, which is my main system drive, into a new computer.
I am running Windows 10.
I want to keep everything intact, and not do a clean installation.
Before making this thread, I have researched how to do this.
Most advice on the internet seems to say that I should run...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.