Okay ived allready made a topic but nothing really happened...but my pc havent worked since mid november all it does on a power on was that it would start up but the cpu fan wouldnt move... then shut off after approx 5 seconds. So i just got my new psu cause i thought that was the...
Okay ill start out by saying that im typing this on my ps3. So the whole thing gonna look messy. But my story is this. In mid november my pc worked fine, but from one day to another the pc did the following : when i start it up then the system fans that are hooked directly into the hd pins in...
man im gettin this with allmost the same board. My gigabyte p956 S3 worked one day and refused to post the next(Any fan that is conected directly to the psu runs but the cpu fan doesnt and after around 5 secs the system turns off). I gave it to a guy to test the diffrent parts and the...
got a big problem atm.
Got a Ds3 rev 1.0 with f10 bios.
im using vista 32 bit
my pci-e is set itself to 1x which makes slowdown in evereything. I got a small oc atm at 3.2 ghz(8x400).
my gfx is geforce 8800GTS 640mb
got a big problem. my pc just shut down with a blue screen, and kept doing blue screens after that. so i went to reinstall windows but now it cant transfer most of the files during the windows pre installation. anyone got a clue what it is?
naw just the passiv cooler on nb, cpu got scythe infinity and got a fan infront and one in the back. 0.1 on the fsb and 2.2 v on the ram. And i bought em from a danish hardware dealer, best ram ived ever had(they can reach 1200mhz, but not on this board).
i just installed a raptor x as system disk on the intel ports and 2 250 wd caviars in raid 0 on the jmicron ports. Worked like a charm. Wondering why ppl whine so much O.o. Haven`t had a singel issue with this board ever. Only issue is that ived had is that its running to damn fast ^_^ .
got a HD question to here :
i just ordered these hds cause my old ATA133 are KIA
system disk : http://www.wdc.com/en/products/Products.asp?DriveID=190 WD Raptor X 150 GB SATA Hard Drives ( WD1500AHFD )
and 2 storage disks that gonna go in a raid 0 config :
storage x 2...
the 62 are in a orthos load ? cause that would make sense then.
If its normal load then u either upped ya volatage way to much or u got a coolings problem. My 3520(440x8 at 1:1 and 1.41 volt currently) runs at 41 idel and 47 load.
some settings are reported wrong bu windows and core temp while they show the correct in cpu-z and everest and some settings does it wise versa. Just some bug.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.