To start; Win 7 64bit workstation, Nvidia GTX670, two Dell LCDs over DVI connections. Now and then the second display would show an 'out of range' warning (1600x1200@60Hz native). Rebooting would fix it. This time, the second display would not come into range. Went into Nvidia Control panel (set...
Alright, here's the layout:
Business PCs, we're using 300GB Velociraptors in RAID 1 right now (2 drives.) This is on an X79 board using the built in Intel RAID.
Want to migrate to some SSDs; 240GB Samsung 840 Pros.
For expediency, would like to just take the working installs of Windows 7 +...
After moving close to the Pacific and riding my bicycle on the strand, I've noticed some forward facing hardware is getting a coating of oxidation (disc rotors, stem bolts, etc.) Besides being ugly and annoying, I don't want it to build up enough to cause issues with servicing and maintenance...
Want to digital paint a 24" x 12" image, that would be made into a framed print at that size once finished. Should the project be set to those dimensions in 300dpi and CYMK color? Can I convert to CYMK later and start with RGB?
the syndrome of a good looking thing co-opted by bad looking people
e.g.
trenchcoats are worn by cool, hard boiled police detectives and badass street vigilantes
geeks notice this
geeks start wearing trenchcoats
geeks are not cool, hard boiled, or bad-ass. they are portly and possess...
I just got a used Giant Rincon with tires described as '26 x 2.1'. I want street tires instead of mountain bike tires; am I limited to tires that come in 26 x 2.1 only, or can I fit 26 x 2.0 (or smaller)?
I'm 99% sure that the little pilot flame does touch a disc-like element, which I assume is the thermocouple. Hmm.
Thanks all for your replies so far, very helpful in tracking this down.
There is a little shield in front of the pilot light chamber. The pilot light likes to go out no matter if it's been in place or not.
I'm not quite sure how to access that chamber; it seems to just be an area at the bottom of the heater. I assume there's just something you can remove to get...
It is the kind behind a little glass window, so I can see the pilot itself. I don't think any kind of draft is getting in there, we experiment by opening and closing the back door (which is right next to the closet the heater is kept in) rapidly but nothing happened. The flame seems fine, but...
There is a three position knob on the front of the heater, with 'ON', 'light' and 'OFF'. The only other adjustment knob is the heat of the water.
Or perhaps you mean the actual spigot that allows gas flow into the heater at all? Could it simply be set too far open? (or closed?)
Old apartment but very new water heater (gas). The pilot light keeps going out... we have to re-light it in the morning about 3-4 times a week. Re-lights easily by following instructions. Stays lit the rest of the day (usually.) No water leaking.
Mysterious. Thoughts?
I'm having a title printed for a vehicle I own (Florida has electronic titling now, so unless you specifically request it you do not recieve a paper title once all liens are cleared.)
Thing is, I have moved to Los Angeles as of very early december. A few days prior to moving, I filled out...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.