Verizon is pretty much unlimited. (I have unlimited 4G + paid unlimited hotspot).
There is network management, but it is on the tower level.
If the tower is loaded, heavy users will be throttled.
If bandwidth is available, you can go to town.
This month was my heaviest month at 232.211 GB...
So far, I have only found two viable units that meet the requirements.
These would be the Netgear GSM7224-200 and the Dell PowerConnect 2816.
The Cisco SG300-10 is in the right price range, but does not appear to have a DHCP server.
The HP 1910-16G and ZyXEL GS-4012F do not appear to have a...
There are two options for "blank" MAC.
The truly blank MAC of 00:00:00:00:00:00.
There are some products that still are tested this way.
My other "blank" MAC, it is a product that comes with a partially pre-programmed to our MAC block. All products arrive with the same MAC and are then...
I would like to ask for assistance for a work related project.
My end product test stations run a second isolated network (per test station, separate from the corporate LAN), in order to talk to Ethernet enabled devices.
Many years ago, I selected a Linksys RV016 to perform my functions within...
First Hot Deals post.
Hope the format is fine...
Was in Sam's Club yesterday and the GE CFL 8 packs were listed at $0.78 a pack, limit 10.
Thought it was local deal of some kind, but this is listed online.
However, it is listed as pickup only...
Is BIOS set to warn on fanspeed or over temp?
Could be that the cooler is slowing down outside the control limits.
Or that the temp of the CPU is jumping up...
Some of the Cradlepoint routers do WiFi as WAN.
They basically have dual radios.
One can be used for your internal network.
The other can be used to connect to a WiFi network.
In your case, this would be the hotspot of your phone.
You would still have to start your hotspot manually...
I've connected to networks at half that distance with a Ubiquity PicoStation M2-HP with an omni directional. However, it wasn't very stable, due to the number of networks within view of the omni.
If you were to combine it with a directional antenna and line of sight, you might have a chance...
Solder types.
There are solder types for work outside of electronics.
However, inside electronics there are lead free formulations and lead formulations.
Lead free is required for electronics shipped to Europe (and now many other nations).
However, lead free can be a problem to work with, as...
I settled on it for three reasons.
The first was that it was 5.25", which there are significantly less of than 3.5".
(After my rebuild, I had an empty 5.25" slot with no filler panel).
The reviews were much higher on this model than anything else.
I also wanted to have USB 3.0 on the front...
There is a new BIOS version for my board.
I was able to enter setup after updating with the keyboard that would not work previously.
I only tried it once, so my sample size is very low, but it was very encouraging.
AFT PRO-57U.
This is what I settled on and I suggest you look into.
Fairly pricey, but good reviews and it operates at high speeds.
http://www.newegg.com/Product/Produc...176023&Tpk=57u
After the last firmware update, I am having the same problem. (Pro Version of the P8V77).
I was able to easily get into BIOS before that, but have not been able to since.
Looks like it is time for a USB keyboard.
The OP may be done with this thread (or not) but I have to correct the color codes posted above by ericloewe.
The European color codes are:
Brown = Phase / Hot
Blue = Neutral
Green / Yellow striped = Ground
Also, for the U.S.
Black = Hot (Remember black is the color of death).
White...
Slightly more at Newegg because of no free shipping, but it lasts until 4/22.
This is a fallback location, in case Amazon runs out soon.
http://www.newegg.com/Product/Produc...82E16817371044
Coupon code PAXANT15 (on page) makes this 49.99 + shipping
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.