I've looked around and found no useful information out there. Basically i want to update to the latest nForce4 but i am unsure how to do this correctly and more importantly safely. While searching for info i found some instances were users have been unable to boot up their PCs after unstalling...
Since you have the most posts i will go with your suggestion. So i can buy this heat sink then try different fans on top of it? Also does it need its own bracket or will it just slot straight into my existing setup? I really want to avoid having to remove the backplate as that is a lot of extra...
Not interested in Zalman or Gigibyte if possible. I am hoping there is a better solution out there and being quiet is big on my agenda but cooling effectiveness has to be top as well. Now when i say quiet i don't mean as in the noise of moving air but as in other annoying whines and rattles that...
Ok recently i have been reading up on what to do and not to do when overclocking and the process seems to include overclocking in small increments then testing using Prime95 which is fair enough but i always considered Prime a 12 hour test so it seems useless to me. For instance if i am putting...
Got errors after 4hr 30mins with Prime. Any advice on what i should do now? Raise voltage to cpu, put the multiplier down and raise the fsb some more? In the meantime i have put the fsb down to 215 and will run another test overnight.
Raised fsb to 220 and have my amd 4000+ running at 2.65ghz. Temps are 52 degrees while running Prime 95 and i have my gigibyte rocket 3D running at half speed. Should i worry about the temperature?
Question for you all. I posted earlier in this thread about a very faint high pitched whine coming from my case and that it only appeared when i instlled this motherboard and a cpu cooler. Well i just switched my cpu cooler and i still have the whine so it has to be something on this motherboard...
Hey guys, need abit of assistance. I recently purchased this motherboard with a new cpu cooler (gigabyte 3d rocket) and case but ever since i built the thing i can hear a subtle high pitched whine that is intermittent. It is barely noticable only when its quiet or when i have the machine running...
"I ran both sticks seperately through memtest and Primetest (13 hours with each)"
Would help if you actually read my post. Doesn't matter guys, you lot have been pretty much unhelpful so i will be ordering a new cpu soon.
As i mentioned in my first post i tested both sticks seperately and they are fine, a buddy of mine is testing them running in dual mode on his PC and all is well so far. I will order a new cpu tomorrow night if no one has convinced me that the problem may lie elsewhere. I hope i am not making a...
Was running it for 3-4 months on an Abit AX8 with two 1 gig sticks of ram running in dual mode until recently when my computer became really unstable and windows corrupt itself and basically i was crashing every hour. To cut a long story short i immediately thought it was the motherboard so i...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.