If you ever got fraudulent charges on this card and disputed them, beware! Chase will sneak these charges back in on the next billing statement without them showing in the transactions list. Once you paid in full, they will not give you conditional credit till the case is resolved. Since you...
They cancelled on them(my wife and kid) the day before the scheduled flight because the ticket was good for weekdays only. Why didn't they alerted them then when they made the reservation two weeks earlier? To add insult to injury, they wouldn't let then fly till 5 days later cos the flights...
Anybody elses (besides jhites ) with Kingston HyperX PC3500 (dual stick 1GB) able to run at 2225 or 2226 timings at DDR400 or greater? The best I can get is 24488 at 5:4 ratio at 250MHz(DDR400). Is all HyperX PC3500 the same?
Just found out the beta version has this error problem after 16K passes. I dowloaded the version 22(latest release version) and was able to run 2 instances for >24hrs.
Ya, I have the memtest utility (windows version) which I ran stable overnight. You can't really tell your system is stable by just running memtest though.
Seems like cost is a non-issue with you. I would go for the Aspire SuperAlien case instead. I have been using Antec cases in the past...they are very nice case but my new SuperAlien case (comes with 500W PS) is much nicer. BTW, I am using stock fan for my CPU. The overclocking limit is...
"3dmark2003 with matched pair 512mb ocz gold pc 500 and ati 9700 pro = 5271... stable on prime95 ... cpuz output below shows the 2.4c ghz OC to 3.22ghz at relaxed timings "
laggerez,
What version prime95 are you using? Do you get some error after 16K passes?
DAVIDS,
What do you use to test for stability? At first, I try using prime95 v2.37 but it always ends with an error after 16K passes( even when I don't overclock). Now, I have only Sandra "Burn-in Wizard" and 3Dmark2001SE loop mode to test for stability.
I am only able to get my 1G Kit PC3500 at dual configuration to run stable at 2.5 3 3 7 at 450MHz, VDIMM 2.85V on my P4C800-E board. I am curious if anybody got better at that FSB setting?
[
You mentioned that the MBFastTrak BIOS should appear during boot up whe it is enabled/ That's the problem. The the setup doesn't come up when I enable it. Nothing, nada! I'm beginning to think that I have a defective board. I have it enabled and set to raid, but alas, nothing.
Sounds like...
I had to reflash cos I had a bios checksum error which the mobo reflashed the default bios P4C800ED.ROM in the Asus CDROM to recover.
Just what tweaking did I do? Oh, the usual stuff like FSB and DRAM timings. I am now at 250 FSB(5:4 ratio) and 2-4-4-8-8 timing (as rated for Hyper-X...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.