I want to connect a Sony digital camcorder, DCR-TRV510, to my laptop so I can transfer tapes. The camcorder has FireWire and RCA outputs. My laptop only has a USB 3 input. Do I just need an RCA output to USB 3 input converter cable or are there other configuration issues I need to worry...
I’m using a lighted magnifying glass stand to work on the connectors so I can see the connector but the old part is not just popping off.
I have been thinking about just getting a new dual antenna. Is the length and type of connector the only thing I need to specify?
Thanks
Not having any luck so far prying off the ring from the connector on the antenna wire. Any ideas on how to do this? I think I see a fine seam at the bottom of the connector. If so, I’m assuming that is the piece from the old card that needs to be removed.
If I need to replace the connectors on...
I am replacing the WiFi card in my laptop and am having problems connecting the antenna connectors to the card. Is there some sort of trick to this? The photos show the old card, the new card and the antenna connectors.
The connectors on the two cards look different. The connectors on the new...
I am going to replacing rotted rails and posts of a cedar post and rail fence. I am not setting the posts in concrete, just setting qthem in sandy soil. The contributors to rotting on the posts are termites and water. I want to treat the section of the posts that will be in the ground with a...
Hi,
I sent samples of my well water out for testing at the New Hampshire water resources lab. I had them test for pretty much everything including bacteria. I got the results back today and with two exceptions everything that was detectable is below the EPA limit. Almost everything was...
I have an HP Evvy laptop and an LG OLED77C2PUA Smart TV. When I stream live content from the laptop to the TV via an HDMI cable both displays are n landscape mode but the tv display is rotated 90 degrees. Any suggestions on how to fix this? I haven't been able to find a setting or the laptop...
All good ideas. I didn't know if there was anything special about it, such as does it have to be conductive. I don't want to use something that will cause a problem. The material is fairly dense.
I am replacing my iPad 8 digitizer and also installing a new home button. It's been sitting apart for a few days while I was waiting for parts. I went to put it all back together tonight and I can't find the pad the arrow in the photo is pointing to. It covers the home button cable. I'm...
I need to repair my iPad Series 8 Home button cable that got damaged while removing a shattered diffuser. The damaged part is the connector side of the cable. I want fix the cable using part of a different button cable to maintain the fingerprint ID function. Not all button cable assemblies...
I need to replace the digitizer on my iPad Air A2270. I've been looking on Amazon and there are many companies selling digitizers at a wide range of prices. I don't know if there is a wide range of quality and don't want to buy junk. Any suggestions for a good source?
Thanks
I can understand CPU overheating being an issue for the crashes. If I turn off the laptop and let it completely cool down it still experiences the startup issues.
I did get into the UEFI/BIOS settings but will check that out again. I’ll also replace the CMOS battery to see if that helps.
The...
Hi,
I have a Spectre x360 13-4002dx that is having multiple problems. The system is running Windows 10, 64 bit home version and has the latest updates applied.
First, it can’t make up its mind on which boot error it wants to display or if it wants to just start up with no problem.
In trying...
Thanks for all the information on building my own NAS. I've decided to buy an off the shelf NAS. Building my own would be fun and cheaper but my DIY time is already over committed to other projects. I just don't have the bandwidth and I didn't come with any extra slots to upgrade.
Started...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.