http://www.portvapes.co.uk/?id=Latest-exam-1Z0-876-Dumps&exid=threads/howto-overclock-c2q-quads-and-c2d-duals-a-guide-v1-7.47089/
In the future, please tell a bit about the links that are posted.
Itis required as per the CPU forums rules.
esquared
Anandtech Forum Director
I'd like to hear some feedback from people who have recently purchased a B550 motherboard intended for use with a newer Zen3 chip like the 5900X: did the board POST and allow you update the BIOS with your CPU? I read about some newer boards not POSTing with a Zen3 at all. It's a catch 22. You...
@rat - Yes, I shut is down for ~1 h once per day for the first 4 days... should have included that bit in the write-up. Just FYI, room temp was 61-64 F through out (it is in my basement which is very consistently cool as I do not have HVAC down there). The coldest the internal temps read was...
Pump-out?
EDIT: I googled that and find it to be an urban legend. I have dismounted an Athlon XP a few months ago to replace the HSF with a newer, quiet one. The thing had been together since 2004 and I saw no evidence of this effect nor had I observed any increase in temps while the server...
I didn't select the it intentionally. I happened to upgrade this machine and had this motherboard/CPU available for the experiment.
If you're asking if we can generalize based on an n of 1, I think that can be risky. I am not going to break it down and repeat the experiment, but others are...
Purpose
According to the manufacture of AS5, there can be up to 200 hours of break in time required for temps to stabilize. This claim has been tested the results are shared in this thread.
Materials, software, and experiment
A delidded i7-3770k (over-clocked to 44x100 with fixed vcore) was...
Consider the results I presented invalid. I did not control for the FFT size (thought I did but later realized the defaults define a range). I edited the first post of this thread and will repeat.
I compared Arctic Silver 5 to MX-4 between my new i7-4790K and my NH-14D. In short, I ran mprime (Linux64,Prime95,V28.5,build 2) using large FFTs with 8 threads and logged the temps throughout the run once per second using a shell script. Ambient temp which is very important to consider did...
I studied the manual closely and it seems that the two CPU fan connectors expect the 4 pins to be:
1) Ground
2) +12V
3) Sense
4) Speed control
The three SYS fan connectors expect the 4 pins to be:
1) Ground
2) Speed control
3) Sense
4) NC
I hooked up my two CPU fans to the SYS headers and they...
That is more or less how mine is setup. I have the green and blue point at the lowest 12.5 % setting. Blue is set to 50 C yet despite an idle temp of 28-30 C it still runs @ full RPMs. I have the 3pin fan connected correctly to the 4-pin header; there is a fin of plastic that makes it...
Just build an i7-4790K system with this board and have my NH-D14 two fans connected to the two CPU fan pins on the MB. I cannot get the smart fan feature in the BIOS to work with either of them; they only run at full throttle despite my adjusting the temp/RPM points. Has anyone with this board...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.