I've experimented with a BCLK of 100 as well, but for some reason the system doesn't always boot when you try to use the memory at DDR4-3000. It's reliable with a BCLK of 125 at that memory speed.
I have tried to use a BCLK of 100 with DDR4-2133 to try experiment that way:
Mult 46
Cache 40-45...
I have a weird issue with a PC using a i7-5960X and overclocking the cache.
Motherboard: Asus X99 Sabertooth TUF
Settings:
BCLK 125 Mhz
Mult: 37
Cache Mult: 28
Memory DDR4-3000
Vcore: 1.3v (manual)
Vcache: 1.2v (manual)
VSSCA: 1.05v (manual)
VCCin: 1.92v
Other peripherals...
At work I have used PLX 8648 and 8618 switches (x48 lane and x18 lane) that also carry the same 5.0 Gbps tag line, but definitely work in 4x and 8x bandwidths.
If the 8609 switch was limited to 1x switching bandwidths, then why would PLX allow you to configure it in 4x lane mode? The 8609...
The switch is a 5 GT x 8 lane switch, not 5 Gb total bandwidth. 4 lanes are dedicated for the cable port, and 4 lanes are dedicated to the card edge connector.
So, by using 4 lanes you will have 2000 MBps available bandwidth.
But yes, using GigE you will be saving yourself a lot of hassle...
4 lanes of Gen 2 PCIe (which is the card linked) is 20 Gb/s vs the 10 Gb/s from one 10 Gb Ethernet link. However, the Ethernet solution will be a LOT easier to setup AND you can use more than one port to get more bandwidth.
10Gbase-T cards (copper) are expensive as well, but still probably...
It looks like it will work, but you will need to create drivers and software to operate the switch on the card in a non transparent mode.
You might need a card for each PC, and then connect them with a cable - at that point you won't be able to transfer data, you'll have to create something...
Argggg, please make them in bigger sizes :( The first gen ones also had the same issue for me.
265/17 and 295/18 would be awesome. They do have 255/40/17 and 285/30/18 now (previously the max was 275/35/18), so maybe I'll give those a try.
Miles Austin
Steve Smith
Reggie Wayne
Vick Ballard
Pick 1 to bench, what say you guys (non ppr)?
I want to bench Austin, but he is playing the Saints. My opponent has Cam, so I wanted to leave in Steve Smith to hopefully counter some of Cam's impact.
It's on channel 7 in the bay area. All ESPN or NFL Network games involving a local team are rebroadcast on a local channel (unless blacked out).
It's the NFL or ESPN feed, just shown on a different channel so those who don't subscribe can watch the local game.
This can be true if a full depth tire "chunks", or has pieces ripped off when the tread flexes. Once you shave it, the depth doesn't allow the same flexing, and no chunking.
A shaved tire and a full depth tire used on the track may actually see the same useful life. The rubber will harden...
I am glad Kimi is back:
Kimi spins near the end of Q3, ruining the laps of those behind him.
Reporter: Kimi, what happened?
Kimi: I spun
<reporter waits for more elaboration>
Reporter: A bit a disaster for you and the others wasn't it?
Kimi: I don't care about the others.
I have an 06 MT. I like it, my only gripe is the paint sucks. It has very little chip resistance, so my hood looks terrible after 90k. Other than that it has been great.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.