Wow- it looks like upping the memory voltage did the trick- will do further testing tonight but just ran prime95 blend test for 2 hours without problems (before it lasted a total of one minute!). Looking back I think I had always had the memory voltage upped slightly but when I went to...
I will try upping the memory voltage.
I let memest run overnight- woke up to find no "errors" but the computer was completely locked up/unresponsive-- will test the power supply this AM
thanks
Hi all- I noticed my computer had recently started crashing especially during video encoding. I fired up prime 95 (v25.6) and noted the following:
Prime95 testing:
Using blend- the computer crashes and reboots within 1 minute
Using small FFTs it can run at least one hour without problems...
Heads up if you try to use the SPDIF connector- the pins are mislabeled in the manual- the digital out is actually pin 2 not 1! ( I think pin 1 is 5V and pin 4 is ground).
This caused me no end of grief- hopefully this post will help out some other poor soul looking for a reason why they...
Hello all- trying to get some help on an annoying standby issue.
My new build (see below) will successfully go into and out of S3 standby and wake up appropriately for network access (remote desktop, shared folder access)
Here's the problem- when I boot up another computer in my home network...
I got a nice quick overclock using this board- q6600 now running at 3.3 (9x367)- only had to up the vcore to 1.3375. I left the EIST and C1E enabled without trouble.
My only question is whether there are any advantages to changing the SATA options to native and/or AHCI?
Hi all-
Trying to put together a new computer with a gigabyte p35-ds3l. Here's the problem-
1)When I try to boot with the fan/heatsink attached I get no post beeps- the fans power on but nothing else- nothing on the screen
2) If I just set the fan/heatsink on top of the cpu without pushing...
To see/set the memory timing you need to to use CTRL+F1 on the main bios screen
Rocky- why not try some overclocking and let us know how it goes- I have a near identical setup almost ready to go
This deal turned out even hotter for me- went to a kmart in colorado. There I printed out (2) 8x10's after the clerk said he would accept two coupons (the language on the coupon states one per purchase). Anyway to my surprise they PAID me 51 cents!!!! Here's the math; 6.99x2 - 6.99(Buy one get...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.