I just completed my new i7-6700K build that I bought from Micro Center in MN. I ran into an issue where fans would spin for a few seconds and the diagnostic led showed 55 on my Gigabyte Z710X Gaming 7 motherboard then power off. It was a bad RAM module that caused the issue from the matched...
Why not put a second network card in both computers and connect this network card to an offline shared network. This second network may be the network cable running directly from one computer to the other or through a switch for more computers to access this network. Set static IPs that are...
Your trunk port on both routers will be untagged as you will apply a VLAN tag to each wireless SSID and each non-trunk LAN port. You can plug additional unmanaged switches into the tagged VLAN ports of your WRH54G or the E1200 if you need more network ports and the switch with all devices...
It looks like you have this setup Modem - WRH54G (Routing Mode broadcasting Private(VLAN#?) and Guest(VLAN#?) SSID) - LAN Port #4 - E1200 (AP Mode). You already have the guest network working on the main router but if you want the exact same protection from guest on the E1200. To make it work...
RAID1 is a mirror so both drives are identical and easily accessible individually. Each disk seen as a standalone should be able to have all files recovered from it as long as the hard drive is good. I have seen that data cant easily be seen when plugged in standalone if one of the drives is...
All motherboards made by MSI have a TPM header on them. The TPM chip for all MSI motherboards is available for purchase unlike several others I have looked at recently that may have the TPM header but no TPM chip sold for it. A TPM chip for MSI motherboards can be purchased from their online...
I tried another power switch on the motherboard pins with no change. I also unplugged the hard drive, DVD drive and took out the dial-up modem with no luck.
I am trying to fix a Dell Inspiron Desktop with a E2180 CPU. The light on the back of the power supply is green and led on the motherboard lights up when I plug the machine into power. When I press the power button nothing happens. I tried re-seating the RAM and CPU. I also tried a CMOS...
Do you have a old PC (500 MHz and 512 MB of RAM is enough) laying around and 2 network cards? If possible setup Smoothwall, IPCop or any flavor of linux and set it up to replace the Dynex router. A PC as the router is more reliable then buying another cheap router that will have the same...
Antec 900 case for my system with a Corsair TX750 watt PSU. Working great with my ASUS P5Q Deluxe motherboard and Nvidia 9800 GTX video card. All cables have no issues reaching except the 8 pin extra motherboard connector had to be routed along the back of the case to reach the top of my...
My computer is running Vista x64 Ultimate with 4 GB of RAM, I have the Hauppauge WinTV HVR-1800 PCI Express. With Vista Media Center I don't have artifacts or any issues watching/recording Cable TV.
For remote desktop access just use logmein.com its free and gets around the firewall with no port forwarding needed. Simple install for remote control from any browser.
I ran into a laptop that needed the OS reinstalled with no CD Drive. I got around the problem by using PXEKnife to boot gparted and created 2 FAT32 partitions, and format both. The 2nd partition was only slightly larger then the Win XP CD. The next step was to boot into a Linux live CD and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.