Recent content by killa62

K
Managed switch?

also, you don't need a managed switch, an unmanaged one will do fine managed switches are good for stuff like VoIP, where some QOS issues come into play
- killa62
- Post #5
- Sep 22, 2005
- Forum: Networking
K
Possible to get two IP addresses from the same DSL line?

as far as i know, the only isp that gives you more than 1 static ip is speakeasy site is speakeasy.net all you would need to do is call them, set up dsl, mention the slashdot offer (8 free static ips) and then buy a switch to hook the computers to the dsl modem manually assigning an ip to each...
- killa62
- Post #5
- Sep 22, 2005
- Forum: Networking
K
Laptop connected to wireless network...

try reinstalling the tcp/ip stack in windows artcle here http://www.petri.co.il/reinstall_tcp_ip_on_windows_xp.htm
- killa62
- Post #2
- Sep 22, 2005
- Forum: Networking
K
Can you tell what model ATI Radeon card this is

looks like a 9200 se, but i may be wrong
- killa62
- Post #5
- Jul 9, 2005
- Forum: Computer Building
K
BF2 Is capped at 100FPS

yup, intel
- killa62
- Post #15
- Jul 9, 2005
- Forum: Windows
K
Would it be hard to repair a broken pin on a Athlon 64 winchester 939 cpu?

coldheat won't work. it'll kill the processor with 200k volts
- killa62
- Post #19
- May 14, 2005
- Forum: Ask a Technical Professional
K
a8n-sli chipset heatsink fan

I ordered 2 fans from http://cgi.ebay.com/ws/eBayISAPI.dll?Vi...3&item=6713592020&rd=1&ssPageName=WD1V but i ordered the F fan instead of the FM Here's the difference between the F and FM http://www.ebmpapst.us/allpdfs/400F.pdf Idle temps = less than 45 now, and no gay ass sound... people...
- killa62
- Post #233
- Apr 3, 2005
- Forum: Motherboards
K
a8n-sli chipset heatsink fan

there is NOT a temperature probe on the NF4 chipset, or at least one that the motherboard can access. My temperatures measured using my case temperature diodes are always more than 6 degrees higher than the ones reported by speedfan. Use an external probe attached to the heatsink to measure...
- killa62
- Post #228
- Apr 1, 2005
- Forum: Motherboards
K
a8n-sli chipset heatsink fan

Would it be better to mount the 40mm fan upside down or rightside up? Because there are video cards in the way spewing hot air, i think that it would be better to mount it upside down (sucking air thru the fins and spitting it out) than rightside up (blowing air across fins) What do you guys...
- killa62
- Post #221
- Mar 31, 2005
- Forum: Motherboards
K
a8n-sli chipset heatsink fan

Couldn't you just screw on 3 screws and leave the 4th screw off, would that work or is the fan not stable?
- killa62
- Post #208
- Mar 30, 2005
- Forum: Motherboards
K
a8n-sli chipset heatsink fan

well i'm in the process of ordering a papst fan right now, i'm running stock but i took off the metal covering over the chipset, all that does is generate more noise, reduce airflow and not allow your finger to get cut off. anyways i'm running with almost no airflow in my case (2 120mm case...
- killa62
- Post #203
- Mar 29, 2005
- Forum: Motherboards
K
a8n-sli chipset heatsink fan

Somoeone is selling the papst fans on ebay. @ 18.75 for two, that's pretty cheep Link here 99.7 rating is good too with 5538 score... so go and score some fans :P...
- killa62
- Post #187
- Mar 26, 2005
- Forum: Motherboards

RESOURCES

Top Bottom