OK I didn't know 4 was harder than 2. Makes sense though. Is it because of heat due to the close proximity of the extra chips that is causing the problems? Or is it a motherboard issue?
I think I'll give loosening to 5-5-5-15 a go. Maybe then I can even up the FSB from 425 to 450 with my...
Yeah I set my voltage to Auto. I think the mobo is automatically setting it to the equivalent to +.3 cuz in speedfan I am showing ram voltage of around 2.24 or so.
I was thinking about loosening up the timings to 5-5-5-12. Do you know how much performance will I lose if I do this but keep...
I am having a problem with my memory in the rig described my profile.
I used to have just 2 sticks of the 2 X 1GB Crucial Ballistixs DDR2 800 4-4-4-12, but i ran it at 850. No problems running that for about 3 months, and i have run Orthos many times indefinitely with no errors.
Last...
what's the highest voltage you would give the CPU in order to overclock without significantly risking the life expectancy of the e6750? You guys think 1.6v is way too much?
One weird thing is that my memory voltage is set at +.3V, and I know the standard is 1.8V. This would lead me to believe that +.3 is giving me 2.1V to my RAM, but speedfan is reading my volt2 at ~2.16-2.27. Anybody know why that's the case?
I've been running my system stable at 3.4 (8x425) and RAM timings at 4-4-4-12 with the following voltage setting:
System Voltage Control: Manual
DDR2/DDR3 Overvoltage Control: +0.3V
PCI E OverVoltage Control: +0.1V
FSB OverVoltage Control: +0.1V
(G)MCH OverVoltage Control: +0.1V
CPU...
I'm thinking it might be folding@home now causing me some issues.
Tried opening a second Internet Explorer window with folding at home running and I got that error again.
I def think it is a software issue and not a hardware one now.
Any thoughts?
I didn't know either until I read some of the overclocking posts in this forum so I gave it a try. Apprently, it works, but i guess not that well for me.
Just set up my new rig, but I'm still using my 7900gtx for now. I wanted to OC it a bit to get a little more life out of this baby. I decided to use ATITool in the past with my x850xt and want to use it with this card.
After a modest OC (+25 core and +100 mem) which was supposedly stable...
Yup that's exactly what mine looks like from the top
hmm
OK i guess i don't have a faulty one. It's keeping my e6750 nice and cool even at 3.4
I guess I'll just have to live with a faint rattling noise (hardling audible at all actually, but it bugs me)
Anybody have this HSF and is experiencing a faint rattling noise coming from the setup? I am pretty sure it is being caused by the HSF.
I was examining it just now and I noticed that on the top plate which is used to secure the fan to the HSF, there are 6 holes for what I presume to be the...
Looks like you're getting 1 degree better temps than me with the same cpu cooler (tuniq 120). I must have not applied enough of that thermal paste. I think some of it was scraped off when I was rotating that cooler over the CPU to reorient the direction of the fan and fins. My friend said...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.