Recent content by LastRide

L
My SL6Z3 2.4C

Check this guy out..LOL.He needed 1.840 Vcore though..LOL. 4GHz
- LastRide
- Post #10
- Nov 24, 2003
- Forum: CPUs and Overclocking
L
My SL6Z3 2.4C

Believe it or not I had a chance to get a 2.4B that did 3.6 but I passed on it a few months back.:confused:
- LastRide
- Post #9
- Nov 24, 2003
- Forum: CPUs and Overclocking
L
Arctic Silver III or Arctic Alumina or Céramique by Arctic Silver

I would go with ceramique.It isn't conductive and therefor shouldn't void warranty.Its thicker than arctic silver so you have to play with it a little more to get a nice thin spread.It works just as good if not slightly better.
- LastRide
- Post #4
- Aug 11, 2003
- Forum: CPUs and Overclocking
L
Overclock 2.C FSB800

Raise you FSB another 5-10 FSB,but put your dram ratio on 3:2 (266).For now I recommend 3:2 and memory timings of 2.5/3/3/7 to find out the limit of your CPU.Just keep raiseing the FSB until you can't boot into windows.From here you can add vcore voltage from 1.525 to 1.575 preferrably.Just...
- LastRide
- Post #14
- Jul 25, 2003
- Forum: CPUs and Overclocking
L
P4 2.4 SL6RZ MALAY

:Q .I am spying on you Thugs to see what your up too..LOL:D
- LastRide
- Post #16
- Jul 24, 2003
- Forum: CPUs and Overclocking
L
FAQs, Monitoring Programs, Benchmarks, Bios/Drivers, & Other Apps for ALL

Great thread,very informative.All the programs you can handle and more all in one spot.
- LastRide
- Post #193
- Jul 21, 2003
- Forum: CPUs and Overclocking
L
2.6c OC, MAX P4 Core Voltage? Help please!

Your are going to have a tough time trying to run Street Racer at higher overclocks.There are a lot of people that can't run Street Racer including myself.Seems like certain ram runs better with the GA options.Here is a tip.Disable command per clock in GA .You can also try and diable the one...
- LastRide
- Post #12
- Jul 20, 2003
- Forum: CPUs and Overclocking
L
ASUS P4P800 Delux, 2.8ghz p4. Good to overclock?

Did you buy that stuff already?.I would say get the 2.6C they are overclocking like crazy,same with the 2.4C.As far as a mobo I would recommend the Abit IC7 (non G) unless you need raid.Otherwise your fine with the P4P800 and 2.8C.
- LastRide
- Post #3
- Jul 20, 2003
- Forum: CPUs and Overclocking
L
P4 2.4 SL6RZ MALAY

Pull it and try it.Yeah the SL6RZ Malay was good but the best one was the Costa Rica SL6RZ I think week 52.All you can do is try it cause they vary.
- LastRide
- Post #2
- Jul 19, 2003
- Forum: CPUs and Overclocking
L
?

hmmm,there are 2 ways you can try.While booting hit escape key to bring up the boot sequence (depending on what you have for mobo it can be F3 or other key,maybe F4.You can go into the bios where boot selection is listed.Make sure your hard drive is selected as one of the boot devices.Usually...
- LastRide
- Post #2
- Jul 19, 2003
- Forum: Motherboards
L
help me pick :(

For a cheap board the SOLTEK SL-75FRN2-L for $88 or raid version for $99 at newegg is pretty good.There is a thread in the motherboard section on this model and most seem to really like it.My first pick would be the Epox 8RDA+ for more money.
- LastRide
- Post #13
- Jul 19, 2003
- Forum: Motherboards
L
Ready to OC, plz advise

Lock the agp/pci to 66/33/ if you can with that mobo.
- LastRide
- Post #6
- Jul 19, 2003
- Forum: CPUs and Overclocking
L
Arctic Silver and Amd/Intel warrantys?

I now use the new Arctic silver Ceramique paste.Its a little thicker than AS3 but its non conductive and works better.This is a partial review from overclockers website. Temperatures - Not Overclocked Idle Load Arctic Silver 3 39.2 43.3 Céramique 38.4 42.9 Temperatures -...
- LastRide
- Post #8
- Jul 12, 2003
- Forum: CPUs and Overclocking
L
P4c performance is TERRIBLE

The paste is probably going to be squishing out all over the place when you take the heatsink off.Too much paste will cause excesssive heat.
- LastRide
- Post #46
- Jul 12, 2003
- Forum: CPUs and Overclocking
L
What company will special order a motherboard?

Check Aopens website.There is a "where to buy" on the left and you can do a search in the U.S.,city and what not for that model. http://www.aopen.com/
- LastRide
- Post #5
- Jul 11, 2003
- Forum: Motherboards

RESOURCES

Top Bottom