ok, ill loosen the timings. now my fsb:ram is 1:1 and i cant take it any lower and my ram stock is 800MHz so i will be OC'ing the ram, does this require me to bump up my ram voltage from 1.9V. the rating is 2.2V for these crucial ballistix sticks.
I have an ASUS P5N-E SLI and a C2D E6850 and 2x1Gb Crucial Ballistix PC6400. Can anyone help me? My questions follow.
Looking for suggestions as I am hanging when windows loads.
Here is where I am:
1.55Vcore
415.5MHz fsb, multiplier of 9
833MHz ddr2, this gives fsb:Dram ratio of 1:1...
well if i made a mistake, oh well. i just know that i couldnt get my C2Q beyond 2.9GHz due to my mobo...asus p5n-e sli which sucks for OC on quads. I will see how this new chip runs at 3.6GHz when i get my chipset coolers from newegg on monday. im sure it will be close either way and should hold...
those were some pretty high load temps on the C2Q cores at mid 80's Celcius at 3.6GHz. yea, it outperformed the dualie at that OC but runs way too hot even with that huge cooler. Right now, I'll take the C2D...my next build...Then I'll start checking into quads because atleast all new games and...
i have the 8800GT 512 from evga and just ordered an aftermarket cooler. when it arrives i plan to use rivatuner to oc my vid card. my question is about the ram HS that come with the aftermarket cooler. are these for my system ram or for the ram on the GPU? here is a link to my cooler...
i tried vcore of 1.4V and still cant make past post. i did some reading on other forums about this board sucking for oc'ing quad cores. it handles duals just fine but alot of people say that this mobo clocks quads around 2.6-3.0GHz and I am at 2.9GHz so i suppose unless i get a new mobo that i...
cool guys thanks...im glad this is easy because i have done it many times since the first because i still keep hanging when i get to 3GHz. I have it now at 2.9GHz and stable with vcore 1.25V...is it possible that my mobo wont let me clock this quad higher? mobo is asus p5n-e sli.
mobo is asus p5n-e sli
so i should set my ram to 1.9V?
my vid on coretemp is 1.2875V, should i set my vcore to 1.2875V?
right now im using vcore 1.25V, fsb is 322MHz, multi 9X, fsb: dram is 1:1
are my ram timings ok?
and yes i red the guide twice so far and i could have sworn it said to...
Newbie here. I have a Q6600 G0 revision, ASUS P5N-E SLI mobo and crucial ballstix memory http://www.newegg.com/Product/...x?Item=N82E16820146565
I have been slowly bumping up my fsb using multiplier of 9 and using auto voltages on everything and for some reason i cannot achieve 3GHz using fsb...
I am stuck at the post message! Let me give you my problem and maybe you or someone else has a fix for me. When trying to boot, I get to the screen that says ASUS and has the options of hitting delete to enter bios or hitting tab to enter post message or just hit nothing and it normally goes to...
Graysky,
First, I'd like to thank you for the tutorial as it answered many of my questions. Let me give you my problem and maybe you or someone else has a fix for me. When trying to boot, I get to the screen that says ASUS and has the options of hitting delete to enter bios or hitting tab to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.