One day later....
Interestingly, after my last post above I decided to flash back to an earlier 3.40 Bridge bios (because of a recommendation at asrock forums) and loaded the default settings, and set 2400 Mhz DDR4 with Auto voltage. Fired up Prime95 and let it run all night with the browser...
Yes, I have not noticed the voltages being overridden yet. Is this a override that cant be picked up by software logging?
Earlier I set 3800 Mhz cpu @ 1.3375v and 2400 Mhz ram @ 1.300v but that is about it so far. In Windows it shows it running at 3.8Ghz and ram at 2.4Ghz, but I have only been...
@VirtualLarry
Howdy there. Hey bud, could you give me some overclock advice for my A8-9600 please? I am currently clueless with AMD stuff.
I recently got a "gifted" ASRock AB350M Pro4 because it was always freezing for my Uncle with his R5 1600X. So he gave it to me and got a Prime instead. I...
I'm the same way. I managed to get stable at 4.5 when I first got my 930, however over the years I have found that there really isn't a need for the highest possible clocks. By winter 2011/12 I had finally brought down my clocks to 3.8 and then in the summer I just stopped overclocking all...
I hope it works, I am hopeful. I already did the research and PC Specs says it is compatible, and a few threads over at Asus ROG website has others using different types of xeons. I just have not found a post that directly states the x5650 or x5660 would work. PC Specs lists the x5660 as a...
Anyone know if a 5650 or 5660 will run on a Rampage III Extreme at 3.8 Ghz (3.5 minimum), or run at all for that matter? My i7-930 does 4.5, however I keep her at (200x19) 3.8 just to be nice (actually I didn't like the temps at 4.5)...
If so, what core temps am I looking at on water using...
Did you try setting it to AHCI mode?
I set my Intel to RAID and my Marvel to AHCI and that worked for me. This mod does not affect the JMicron from what I can tell. Try the below procedure as this worked just fine for me...
This is a known problem and the solution is to disable or enable your marvel controller. User sinders discovered that in order for his Intel OROM screen to be working or to bypass it so it will boot he had to DISABLE his Marvel controller. For what ever reason I had to enable it and put it into...
Sorry, I thought I had my signature enabled.
Its the Asus Rampage III Extreme x58 mobo with the ICH10R. I have two different arrays, one is two Samsung 840 Pro's and the other is two Crucial C300's, both are in Raid0. I am quite excited about this even though its not that big a deal.
WooHoo, Thank you Dufus. I would like to report I have working TRIM in RAID0. So I thank you for that work you did. Now all I have to do is the research to figure out what you did so I can do it to OROMs that I want to run, specifically OROM 12.7.0.1936 or the very latest.
Below is the...
Hello again Dufus. Hope all is well on your side of the world wherever that may be.
Actually, I represent many people who still have this extremely expensive motherboard and probably the best built x58 board of all time. It was designed to physically last 10 years or more, not a mere two...
Hello Dufus, I do not know how I lost this thread but somehow I was not aware I had posted here at Anandtech. I didn't even realize I had an account here. So, this morning trying to yet again find this thread I did another search, this time for "SkOrPn modded orom trim" and instantly found this...
Oops, looks like I need 25 posts in order to reply to your PM. Sorry bout that. Below is what I was trying to reply with.
My PM reply:
SWFM Mod? What is that?
Below is the current bios I use with great results by sinders. I'm sure there is no TRIM as of yet, however for what ever reason...
Hello Dufus, I would be willing to test for you (and me lol). I have a Rampage III Extreme with TWO on board BIOS's (flashed with beta bios 1601 and running better than I ever hoped it would). I am using RST drivers 12.7.0.1018 and ICH10R Sata Raid Controller 12.7.0.1936
I have THREE Crucial...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.