I uninstalled all my drives and the JMicron controller from my Device Manager, put the drives back in the Intel controller, and started from scratch and it worked. Thanks.
I swapped the ports before I installed the driver, and now my PC bluescreens at windows startup when I set AHCI in bios. Can I just swap the ports on my hard drives back to the Intel controlled ports, reinstall the JMicron driver and then put the plugs back in the purple ports, or am I SOL...
48C seems a bit high for stock settings. My E6300 runs at 32C idle/37C heavy load with an overclock to 2.8GHz. Although, if you are using the cooling solution that came with the CPU, that might be a normal temp...I have never used the stock cooling solution myself. I would invest in higher end...
My timings are 5-5-5-12, using 800MHz Corsair DDR2-6400. My ratio is 1:1 and the memory is currently at 700MHz with a 350MHz FSB. At the same settings under the F7 BIOS, I couldn't reboot my PC without it hanging after Windows shutdown, after that I would need to power it down manually. I assume...
I updated my BIOS to F8 just last night and it fixed an issue I was having where I would lose my FSB OC whenever I would attempt to reboot my machine. Instead of rebooting, the machine would just hang and I would have to power off manually, and when I powered back on my CPU speed would be back...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.