I work for a 100+ computer lab at a University. Our current server cases are simple HP midtower cases with the stock 340 watt power supplies. They run 3.2 prescotts and a 4 disk raid 5 array. I need new cases with excellent cooling, noise is not an issue, and can support 6+ hard drives. I...
Room temperature, no overclock, it should have been just fine. The X300 worked before an after so I must have just gotten a bad board. You would think they test each one before shipping. I guess I shouldnt complain though-I can wait a week or two more for an $80 savings from MSRP.
Called ati, they are e-mailing me a packing slip and I should have a new one fairly soon. He said they should have constant stock of them from now on.
Quick note about the temperature thing, it was at room temp when I opened it. I live in a dorm so the packing room accepts my package and...
I believe the thread was started so someone could find out why they could not get the HTT above 219 with the cpu and memory throttled back. That is a simple task which any board should be capable of. This evolved into finding out if it is a problem most people are having with winchesters on...
The board is fine because I CAN overclock beyond 220 in windows, the CPU overclocks just fine in windows, but the overclock setting do not work in the bios beyond 219. Everyone tries to make themselves feel good by saying other peoples stuff is crap because they cannot do what theirs does...
Heinrich has it right. I can easily oc beyond 220 fsb in windows with rock solid stability (over 12 hour prime95 torture test) but the bios refuses to post above 219. Even at 219, it fails prime95 within a few minutes. So therefore, there is a big problem with the bios and not our processors.
I was so excited to hear ATI was finally shipping my X800 XL preorder. I tracked it all the way to my door, immediately opened it, replaced my X300 card which has been holding me over until now. I boot up and see... nothing! After a minute of being dumbfounded as to why a video card would...
Ok, first time overclocking and I am failing at step one. Ok I am testing out max HTT/FSB. I lowered the cpu multiplier to 7, RAM to auto then 100 MHz, and then upped the FSB to 220 and lowered that other thing down to 4x from 5x. It will not boot. I have to clear the cmos. I tried again at...
"RADEON® X800 XL and RADEON® X850 XT now available for AGP customers"
Taken straight off ATI's webpage
So ATI WILL be coming out with AGP versions
LINK
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.