Recent content by TRD3SGTE

T
Whats the trick to running stable with all 4 dimm's full?

I have 2x512MB Patriot DDR2 1066 PC2 8500 , and 2x512MB Patriot DDR2 667 PC2 5300. CPU-Z shows that my DDR2 1066 is actually a DDR2 800, and the DDR2 667 is actually DDR2 533. They are sold as DDR2 1006 and DDR2 667 since they are hand-picked and binned at higher speed. I have all four of...
- TRD3SGTE
- Post #16
- Feb 19, 2007
- Forum: CPUs and Overclocking
T
Cannot get past 2.55GHz with E4300?

make sure you are running your memory at 1:1 otherwise your PC might be crashing because your memory is way too fast
- TRD3SGTE
- Post #4
- Feb 19, 2007
- Forum: CPUs and Overclocking
T
Has anyone overclocked Fry's combo P4M800PRO and 4300?

Fry's combo, the E4300, has been reported not very overclocable. The retail CPU is great for overclocking, but not the tray CPU at Fry's. Maybe that is why they sell them as tray CPU... The mobo that is bundled with E4300 isn't a good mobo to OC with. 300FSB is the best you can get out of...
- TRD3SGTE
- Post #8
- Feb 19, 2007
- Forum: CPUs and Overclocking
T
*** Official Gigabyte P965-DS3 Thread ***

First : update your BIOS to F10 Then set your FSB to 450, cpu voltage to 1.28, memory voltage to 2.0 and leave the rest at stock. 3.150GHz should be enough =) 450 FSB
- TRD3SGTE
- Post #1,551
- Feb 19, 2007
- Forum: Motherboards
T
*** Official Gigabyte P965-DS3 Thread ***

I always use the Gigabyte Tune software that comes with my DS3. I can OC up to 550FSB using the software, but stable only up to 547FSB, which is about 3.83GHz. If I OC from BIOS, it won't boot past 530FSB. People say it's best to use BIOS to overclock, but I don't really care :D If I...
- TRD3SGTE
- Post #1,533
- Feb 14, 2007
- Forum: Motherboards
T
*** Official Gigabyte P965-DS3 Thread ***

I'm pretty sure most C2D processor chip will not hit 600FSB. So getting more than DDR2 1200 is kinda pointless (I'm talking about using 1:1 memory divider) So, get a DDR2 800 or DDR2 1066, that should be enough. I have DDR2 667 (PC2 5200 or 266MHz) and DDR2 1066 (PC2 8500 533Mhz) THe...
- TRD3SGTE
- Post #1,428
- Jan 31, 2007
- Forum: Motherboards
T
*** Official Gigabyte P965-DS3 Thread ***

ThePiston : are you considering getting yourself new memory sticks? I'm curious on how fast your OCZ will run...have you ever try to OC it? Maybe using 2:3 divider
- TRD3SGTE
- Post #1,396
- Jan 26, 2007
- Forum: Motherboards
T
*** Official Gigabyte P965-DS3 Thread ***

I'd say, $200 for 2x1GB is great deal. Read reviews here : Linky I'm sure that memory is overclockable. Please report us on how fast you can overclock it ^__^
- TRD3SGTE
- Post #1,394
- Jan 26, 2007
- Forum: Motherboards
T
*** Official Gigabyte P965-DS3 Thread ***

Last night I flashed my DS3 with F10 BIOS. I used to run 534FSB at 5-8-8-20, and now I'm running 4-8-8-4-12 at 547FSB, benchable Super Pi 1M: 547FSB, 3.829GHZ, 4-8-8-4-12 Was able to post a screenie at 550FSB, 3.85GHZ, 4-7-7-20 : 550FSB, 3.85Ghz, 4-7-7-20 Validated here Please...
- TRD3SGTE
- Post #1,392
- Jan 26, 2007
- Forum: Motherboards
T
E6300 on 965P-DS3 rev 2.0, 3.737Ghz @ 534FSB

Last night I flashed my DS3 with F10 BIOS. Then I took your advise, and now I'm running 4-8-8-4-12 at 547FSB, benchable Super Pi 1M: 547FSB, 3.829GHZ, 4-8-8-4-12 Was able to post a screenie at 550FSB, 3.85GHZ : 550FSB, 3.85Ghz, 4-7-7-20 Validated here Please note that this is NOT...
- TRD3SGTE
- Post #12
- Jan 26, 2007
- Forum: CPUs and Overclocking
T
E4300 vs. E6300/6400

E4300 has 9x multiplier E6300 has 7x multiplier E6800 has 11x multiplier E6300 has been proven to run 500FSB, resulting to 3.5GHZ I've never seen a E6800 runs 500FSB, which would hit 5.5GHZ Techspot reviewed E4300 at 3.4Ghz, because they could NOT hit higher than that. In theory...
- TRD3SGTE
- Post #17
- Jan 26, 2007
- Forum: CPUs and Overclocking
T
E6300 on 965P-DS3 rev 2.0, 3.737Ghz @ 534FSB

Gigabyte Taiwan BIOS Link Version Date Description F10 2007/01/12 1. Enhance FSB frequency flexibility F9 2006/12/27 1. Update CPU ID 2. FSB 1333 MHz support for rev 3.3 only F8 2006/12/19 1...
- TRD3SGTE
- Post #8
- Jan 25, 2007
- Forum: CPUs and Overclocking
T
E6300 on 965P-DS3 rev 2.0, 3.737Ghz @ 534FSB

yes yes, I will try tighter timing =) and that timing was set by my DS3 on boot up. Other numbers were 5-8-8-20 and 5-7-8-19, both mobo-selected. I'll force 5-5-5-15 and lower next time. My Patriot might not run 4-4-4-12 at DDR2 1200 like Team Group sticks. But it doesnt hurt to give...
- TRD3SGTE
- Post #6
- Jan 25, 2007
- Forum: CPUs and Overclocking
T
E6300 on 965P-DS3 rev 2.0, 3.737Ghz @ 534FSB

link fixed. 1.55v on CPU at 3.73Ghz, but because of vdroop, the mobo only gets 1.50v prime tested for 10 mins i know, i should have test longer :D i'll do it tonite
- TRD3SGTE
- Post #4
- Jan 25, 2007
- Forum: CPUs and Overclocking
T
E6300 on 965P-DS3 rev 2.0, 3.737Ghz @ 534FSB

I can't get my rig to run any faster.... It's not that I'm not satisfy with the speed, but I think I've hit the limit on this mobo. My Patriot DDR2 1066 hit 1200MHz on 2.5v, so it's not the memory which is holding the speed. It might be the mobo, or the proc....which one is it.... And...
- TRD3SGTE
- Thread
- Jan 25, 2007
- Replies: 14
- Forum: CPUs and Overclocking

RESOURCES

Top Bottom