Recent content by tretneo

T
S3 (STR) failing on new shuttle build

Hey Boxtata, I have noticed some random strange issues as well, once in a while on a cold boot my system will lock up at the esata detection just after post and just before the OS loads from the internal SATA drive. Also if I disable the bios splash screen, the system will sometimes hang before...
- tretneo
- Post #3
- Aug 24, 2007
- Forum: Barebones
T
S3 (STR) failing on new shuttle build

I just put together a new rig intended for use as a media center, connected to my TV and Receiver, based the new SG33G5 barebones w/ the following hardware. E6750 at stock clocks and voltages OCZ2P800R22GK revision 2 @ 800Mhz 4-4-4-15 @ 2.1v LG SATA DVD+-/RW WD SATA Raptor 74GB No...
- tretneo
- Thread
- Aug 19, 2007
- Replies: 3
- Forum: Barebones
T
K8N Neo2 - No Command Rate option in bios

Just got the K8N Neo2 Plat along with a 3700+ SD CPU and I have had good OC results right away but I am getting very frustrated with one thing. The option to change between 1T and 2T command rates is not even showing in the memory timing section where it should be. I checked the Manual for the...
- tretneo
- Thread
- May 28, 2005
- Replies: 0
- Forum: Motherboards
T
MBM5 with A8N-SLI Deluxe

RY62, This is really cool, I like MBM5 but haven't been able to get it to work with the newer mobo's. I will try this out with my A8N-SLI board, thanks. I also have the MSI K8N Neo 4 Platinum SLI board and was wondering if the same code you provided for the Asus board will work with the MSI...
- tretneo
- Post #8
- Apr 6, 2005
- Forum: Motherboards
T
Crucial Ballistix Compatible?

I have used my Crucial Ballistix PC3200 with both an Asus A8N-SLI Deluxe and my new MSI K8N Neo 4 Platinum SLI board with no problems running at 1T & 2-2-2-x (x = anywhere from 5 - 11 that i have tested) tret
- tretneo
- Post #2
- Apr 5, 2005
- Forum: Motherboards
T
PC speaker sound without a pc speaker

It shouldn't make a sound if your soundcard/onboard sound is enabled and working, this disables the system alerts being sent to the mobo speaker. It should anyway.
- tretneo
- Post #6
- Mar 31, 2005
- Forum: Motherboards
T
*** Official MSI K8N Neo4 Platinum (nForce4 Ultra chipset) Thread ***

Being sick sucks, hope you get better, I will try the OC idea. It is an XP-120 w/ a Panaflo 120mm fan. I had to slightly bend a capacitor on the left side due to the heat pipes but it wasn't much of a bend and nothing seems to have been affected. The bottom two SATA ports are not blocked by...
- tretneo
- Post #307
- Mar 27, 2005
- Forum: Motherboards
T
*** Official MSI K8N Neo4 Platinum (nForce4 Ultra chipset) Thread ***

99c , max temp is supposedly 135c but 99c is pretty damn hot. I have installed the latest beta forceware drivers as there is suppsed to be some kind of temp bug with the current official drivers. temps on top card in 79f room now hover around 93c which is better but I would really like to stay...
- tretneo
- Post #302
- Mar 26, 2005
- Forum: Motherboards
T
*** Official MSI K8N Neo4 Platinum (nForce4 Ultra chipset) Thread ***

I am sure someone has posted temps before but I just switched from an A8N-SLI Deluxe to the MSI K8N Neo4 Plat and I am experiencing some high temps on the top Ultra even with Zalman VF700-CU coolers. 75f Room, 10 minutes rthdribl load, 71.84 WHQL Drivers Idle GPU 1 = 68c Idle GPU 2 = 56c...
- tretneo
- Post #300
- Mar 26, 2005
- Forum: Motherboards
T
Ballistix and A8N-SLI Deluxe

I have Ballistix PC3200 @ 2-2-2-7 1T and I have memory stability issues at stock clocks. But my issue is strange as I never have stability problems while gaming for hours and hours, but If I try to run PCMark04, Sandra 2005, Prime95, or Memtest It almost always ends in a hang, or reboot or blue...
- tretneo
- Post #11
- Mar 16, 2005
- Forum: Motherboards
T
A8N-SLI+3500 voltage situation

Well I am not sure what I did, but my system now does not have any Memtest or Prime95 problems but still hangs during PCMark04 memory tests unless I remove one dimm and run in single channel mode tret
- tretneo
- Post #12
- Mar 8, 2005
- Forum: Motherboards
T
A8N-SLI Deluxe Serious Problems

I really don't know of any tests that determine if it is the CPU mem controller or the Memory. I may order a mobo before the CPU since it is cheaper anyway. tret
- tretneo
- Post #10
- Mar 8, 2005
- Forum: Motherboards
T
A8N-SLI Deluxe Serious Problems

Both Dimms in Single Channel Mode Dimm Slots B1 & B2 and PCMark04 Completes Memory test with no problems. Put Dimms Back to Dual Channel Mode Dimm Slots A1 & B1 or A2 & B2 and PCMark04 either Hangs, Reboots or BSOD and Reboot. So what should I order first to test...... DFI SLI Mobo or A64...
- tretneo
- Post #8
- Mar 8, 2005
- Forum: Motherboards
T
A8N-SLI Deluxe Serious Problems

I decided to see what happens when I tried the same tests while running single channel mode. I took out one stick of Ram and left 1 512MB module in Slot B1 as the A8N-SLI Deluxe manual instructs. PCMark04 Completed the Memory tests this time with Ram timings 2-2-2-7 1T DDR400 Single Channel...
- tretneo
- Post #7
- Mar 8, 2005
- Forum: Motherboards
T
A8N-SLI Deluxe Serious Problems

Updated to 1007-002 Bios and removed Second Ultra card and still having exact same hang during the 8MB Raw Write of the Memory portion of PCMark04 Testing. I can only suspect either the Mobo or the CPU at this point. I am planning to order a 90nm 3500+ sometime during this or next week to try...
- tretneo
- Post #6
- Mar 8, 2005
- Forum: Motherboards

RESOURCES

Top Bottom