Pass Your Microsoft 70-642 Exam Easy!

Dump is 95% Valid in Russia. Passed this exam last week. 1-2 new questions, but some answers are wrong :( anyway passed with 800.

Thanks!

Taken exam today, Passed with 825, in India. Thanks every one.
This dumps is 100% valid. make sure on POP3(SSL) and LDAP(SSL) port nos.
POP3(SSL) - 995 (TCP)
LDAP(SSL) - 636 (TCP)

thanks Howie GOOD LUCK

Passed with an 830, but quite a few different questions for me at my testing center not on this dump nor Bruce's or cramjunkie's.

I'd say maybe 65% valid for the three different dumps.

Still though, thanks! It definitely helped me out. :)

this dump is valid but there are new questions may 3 or 5 and there are alot of rung answer

i passed today with 850 in Turkey,Dump stil valid, 2 new questions , pop3 port and ldap port attention !!!

@dazz Thanks for the response. I figured that might be the case. That's what I chose when I first saw the question, but wasn't sure about that.

Also, I saw the question about Scope1 is 98% full with only two ip addresses remaining" etc., etc. twice in the different Exams. Exam Q, Q3. On one, the correct answer is listed as "Modify the start address." On the other, the correct answer is listed as "Increase the database cleanup interval." Anyone know which of the two is correct?

Additionally, are there not testlets on the actual exam? Or is it a set number of normal questions with possible ordered lists, drag and drop and point and shoot? Should I expect 50 questions or more?

Thanks!

@howie

the question is about direct access, the only 2 consecutive ip addresses are the ones in the dump. None of the other ip address are consecutive.

Also, taking Exam L, I don't know if there are questions missing or what. But two sets of questions (the ordered list ones for WSUS and DNS) were exactly repeats.

On Exam L, Q4, I think there is some information missing. I cannot for the life of me figure out how the answer(s) are 131.107.102.100 and 131.107.102.101 with the information given in the question. Even looking at the picture in the answer, all I see is that the 10.10.10.1 and 10.10.10.3 answers are incorrect since they're not routeable on the internet..

Nice one guys, passed today 786.

passed yesterday , valid dump , good luck for all

Still valid in SVK. Passed today with 828. Fewn new questions.

passed five new questions 442 questions and 379 questions valid. thanks all

Passed: Microsoft.ActualTests.70-642.v2012-09-20.by.Anonymous.379q.vce
90% vlaid for Colombia

thanks peter

Passed today 900+, used dumps from cramjunkie,bruce, the anon 442 questions (lot of duplicates), also used CBT nuggets, MS selfpaced training kit 2nd edition, technet ,.. , some dumps have different answers for same questions, so it's not full-proof : next up is classroom training for 646

still valid i passed by score 782 , but the 442 dumb is the best
here is the link
http://adf.ly/ErbLU

passed with 780.thanks to cramjunkie and sugar. 2 new questions, I think there are some wrong answers. Any ways best of luck for all those who will give the exam in future,

Passed today with score above 800. There are some new questions and answer sections in old questions are SLIGHTLY changed. Be sure to study Self-Paced Kit and TechNet articles well, otherwise this one and another dumps won't help you to pass the exam!

Thanks To Allah Passed Yesterday with 828. This dump still valid with 90%. About 5 new Qs.

Passed today with 892. There were 7 new questions not in this dump nor were they in 442q. Few new DNS related questions, WSUS question and CA/NAP questions.

I have not spent with these questions. I took the exam today and hit 640 = /. I will try again next week

Past today with 807 points please combine it with cbt nuggets and technet. Many thanks

I Passed this exam 8/11/2012 850 / 1000
يارب يوفق كل الناس الامتحان سهل جدا جدا بس الناس تذاكر كويس وتخلى بالها من موضوع ان الاجابات بيعكسوا ترتيبها والموضوع دا بيلخبط شويا الامتحان خمسين سؤال ومدته ساعتين وامتنى التوفيق للجميع

Passed Today with 871 :D
Just a new Q about POP3 port number on firewall ( 995 )
I use 442q guys :-)

super valid today. have got 50 questions on exam - all from dump. passed with 850. Russia.

Gorkhaan help me i cn see u passd wit great points

Passed with: 871

1 New question about capturing DHCP traffic, between Server1 and Computer1.

passed with only 807 -.-
used the 442q dump and added the new questions from pdf file.
bad day but passed^^ next is 646

@Aptechcnc can u give me the link of 442 plz. i want to give the exam b4 the end of november

Thank you very much, this test is valid in D.F. Mexico City, With 758 APROVE today. Many greetings to all.
Viva Mexico Cabrones

Bruce Dump is almost 97% Valid.


Guy`s: JUST STUDY =====BRUCE===== DUMP BUT TRY TO UNDERSTAND THE QUESTIONS AND NOT TO MEMORIES THEM, THEN YOU WILL PASS FOR SURE.

@Noone
The answer E) Routing and Remote Access service (RRAS) is correct. You need to install RRAS to enable NAT.

this one , Your network contains an Active Directory forest. The forest contains a member server named Server1 that
runs Windows Server 2008 R2. You need to configure Server1 as a network address translation (NAT) server.
Which server role, role service, or feature should you install?
A. Services for Network File System (NFS)
B. Wireless LAN Service
C. Network Load Balancing (NLB)
D. Group Policy Management
E. Routing and Remote Access service (RRAS)
F. File Server Resource Manager (FSRM)
G. Windows System Resource Manager (WSRM)
H. Health Registration Authority (HRA)
I. Windows Server Update Services (WSUS)
J. Windows Internal Database
K. Simple TCP/IP Services
L. Connection Manager Administration Kit (CMAK)
M. Network Policy Server (NPS)
Correct Answer: E

check selfpaced training kit 2nd ed chapter 7 lesson 2
Enabling NAT
Follow these steps to configure NAT by using Routing And Remote Access Services on a
Windows Server 2008 computer:
1. Configure the NAT server with two interfaces:
■ An interface connected to the Internet, with a public Internet IP address
■ An interface connected to your private intranet, with a static, private IP address
2. In Server Manager, select the Roles object, and then click Add Roles. Add the Network
Policy And Access Services role, with the Routing And Remote Access Services role service.
3. In Server Manager, right-click RolesNetwork Policy And Access ServicesRouting And
Remote Access, and then choose Configure And Enable Routing And Remote Access.
4. On the Welcome To The Routing And Remote Access Server Setup Wizard page,
click Next.
5. On the Configuration page, select Network Address Translation (NAT), and then
click Next.
6. On the NAT Internet Connection page, select the interface that connects the server to
the Internet. Then click Next.

Guys,
the Q19 from Exam C is wrong, I think.

@yosef
http://www.avanset.com/products/visual-certexam-suite.html

p.s nothing in life is free

@Aptechcnc
Hello, why are you talking about the dump 442q
Thanks

@Aptechcnc

thanks for your efforts, where is the link of dump 442q

@John

Thanks for explaination.

Hi everyone, I think we should be use dump 442q, because this is enough for our exam. 379q has so many incorrect question.
If you need dump 442q, please confirm me, I will send link for you.

passed today.
850

@Amir,

No, the answer is correct. I'm lousy at explaining but C is wrong because LPR on its own is not enough.LPD is also needed, and since the question was worded so that each answer represents a complete solution C is impossible.

Hi can anyone explain about this question please ,I think the answer is wrong


-Your company has a server named SRV1 that runs Windows Server 2008 R2. The default Print Services
server role is installed on SRV1.
The company wants to centralize printing on SRV1 for both UNIX and Windows users. You need to
provide support to the UNIX users who print on SRV1. What are two possible ways to achieve this goal?
(Each correct answer presents a complete solution.
Choose two.)
A. Install the Internet Printing role service on SRV1.
B. Install the Line Printer Daemon (LPD) Services role service on SRV1.
C. Configure the printers on SRV1 to use Line Printer Remote printing.
D. Install the File Services server role on SRV1 and activate the Services for Network File System role service.
Answer: AB

I think it should be B and C with referenced to p633 of Microsoft ebook
Any comment on this please??

Thanks in advance

Hi guys.
I passed this exam this week receiving a bit more than 700 points.
Dump "Microsoft.BrainDump.70-642.v2012-09-23.by.Anon.442q.vce" worked for me but it's been deleted lately from this site (don't know why).
I had additional questions that were not present in given dump, the only one I remember :( was related to POP3 secured ports (995).
Good luck!

hey guys cn u help me i cnt open da questions wit vce if i open they dnt. those who manage 2 open them cn u please help me im suppose 2 take a test on monday

Hello, what's the difference with Microsoft.BrainDump.70-642.v2012-09-20.by.cramjunkie.379q
Thanks for everyone jobs