Pass Your Microsoft 70-662 Exam Easy!

@AnotheInbox - Thank you so much for clarifying that mate, the dump I'm looking at just says TXT but a few of the other ones said TXT and A Record that's why I was scratching my head. Cheers for clearing that up appreciate it :)

@MRG, the correct answer is that TXT allows the federated partner to resolve your domain. CNAME allows them to resolve your Client Access server. The answer is wrong when it states A records are used. Binary and I fixed the answer in the latest dumps.

Guys just a quick on ewhich is confusing me, the question about what DNS Records must be created to support federated delegation, Im no sure if it is just a TXT record as per the technet here (http://technet.microsoft.com/en-us/library/ff601760.aspx and here ) the answers people seem to put on here are TXT and A but I'm just so undecided.. Help please.

I passed the exam today after my third attempt, scored 788, there was still some 8-10 new questions even after the addition of the 15 new questions, some are revamped versions of old questions, dump is good but I only had about 20 questions that were from these dumps the rest were new or revamped questions so study TechNet articles and work with the product which is what I did, do not rely on just the dumps or you will find it difficult

Iron Man, you say that a lot of the questions are wrong in this vce, can you give examples and in what sections, would be really helpful to know as I am taking this exam on Thurday and have already failed twice??

Your thoughts on the following please:

Question 11 of 55
Your company has two offices. Each office is configured as an Active Directory site.
The offices connect to each other by using a congested WAN link.
Each office has a direct, high-speed connection to the Internet.
Each site contains two Exchange Server 2010 Service Pack 1 (SP1) Hub Transport servers.
You need to ensure that email messages sent to the Internet from the Exchange organization are never routed over the WAN link.

What should you do from each site?
A. From the Exchange Management Shell, run the Set-TransportConfig crndlet.
B. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
C. From the Exchange Management Shell, run the Set-SendConnector cmdlet.
D. From the Exchange Management Console (EMC), modify the properties of the Receive connector.
E. From the Exchange Management Console (EMC), modify the properties of the Send connector.
F. From the Exchange Management Console (EMC), modify the properties of the remote domain.
G. From the Exchange Management Shell, run the Set- ForeignConnector cmdlet.
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.

I think that this can be accomplished by setting the send connector as scoped. The connector can then only be used by Hub Transport servers in the same Active Directory site. But this can be set by using the set-sendconnector with the -isscopedconnector parameter or by modifying the properties of the send connector.

I can't see any way of achieving this via modifying the accepted domain unless I'm missing something, or by any of the other options.

Your comments please???

This is the only exam I used, Passed with 850. Lots of wrong answers in the vce, google is your friend. The questions are accurate which is the most useful.

@aimmko - is this the only dump you used to review ? how many questions came out from this dump? Thanks!

hiiii

i passed the exam yesterday :)
this dump really helped me and the questions posted by sgirl1 came in the exam,

you really have to study very well, the questions lil bit confusing but if you studied hard you will pass.

all the best for all :)

Q. 6 Ans. D enable a litigation hold
Q. 21 Ans. B
Q. 26 Ans. B
Q. 31 Ans. B
Q. 32 Ans. B
Q. 33 Ans. G
Q. 34 Ans. B
Q. 35 Ans. A,D
Q. 36 Ans. B
Q. 38 Ans. Remove-OWAVirtualDir,New-OWAVirtualDir and reset IIS (but it is not mentioned there) kindly clarify
Q. 40 Ans. Client Access under Server Configuration.
Q. 46 Ans.H
Q. 47 Ans. D

kindly rectify if I am wrong.
thanks

Bob,

I'm doing exam on the end of the month. Can you post your results and new questions you get? thx

Hi guys.

Exam A - Q7
Shouldn't be Set-ImapSettings?

Hi, Combined
You said you had just upload a new dump with 15 new questions but I don't see any new dump.
BTW. THX very much

Combined,

could ya post the awnser to extra questions in her also. I have the exam the 8th and i don't know if your new version will be up by then.

Thx

Hi all,

I've just uploaded the dump with the 15 news questions. You can use it next week. And thank particulary Max for his contribuate.

Look luck!!!!!

uestion 47 of 55
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for more than one question in the series.

Your network contains an Active Directory domain. The domain contains one site.

You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client Access servers, two Hub Transport servers, and three Mailbox servers.

The mailbox servers are members of a database availability group (DAG) named DAG1.

You have a mailbox database named DB1.
You configure two mailbox database copies of DB1.
You verify that both mailbox database copies have a status of Healthy.

You need to ensure that an administrator is notified when the health status of a mailbox database copy changes.

What should you run from the Exchange Management Shell?
A. Test- WebServicesConnectivity
B. Test-SystemHealth
C. Test-AvailabilityService
D. checkdatabaseredundancy.ps1
E. Test-ReplicationHealth
F. Test-SmtpConnectivity
G. Get-MailboxDataboxCopyStatus
H. Retry-Queue
I. Test-MailFlow
J. Get-MailboxDatabase
K. Test-SenderId
L. Get-SenderIdConfig
M. Test-MapiConnectivity
N. Test-OutlookWebServices

Answer is D. checkdatabaseredundancy.ps1

Explanation
hxxp://gallery.technet.microsoft.com/scriptcenter/8833b4db-8016-47e5-b747-951d28faafe7
This script is used to monitor the redundancy of replicated mailbox databases by validating that there is at least two configured and healthy and current copies, and to alert you when only a single healthy copy of a replicated database exists.

hi guys,

these are the answers of the questions, but they are really confusing questions !
Question 46 of 55
answer:test-smtpconnectivity
Question 47 of 55
amswer: i think this E. Test-ReplicationHealth , am confusing with get-mailboxdatabasecopystatus !
Question 45 of 55
answer:From the Exchange Management Shell, run the Set- ReceiveConnector cmdlet.
http://technet.microsoft.com/en-us/library/dd351046.aspx

aimmko thank you, aimmko answered a bunch of these, I converted the Screen Captures from MAX to text. If people could answer any that would be great.
LAST PART:
--------------------------------------
Question 47 of 55
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for more than one question in the series.

Your network contains an Active Directory domain. The domain contains one site.

You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client Access servers, two Hub Transport servers, and three Mailbox servers.

The mailbox servers are members of a database availability group (DAG) named DAG1.

You have a mailbox database named DB1.
You configure two mailbox database copies of DB1.
You verify that both mailbox database copies have a status of Healthy.

You need to ensure that an administrator is notified when the health status of a mailbox database copy changes.

What should you run from the Exchange Management Shell?
A. Test- WebServicesConnectivity
B. Test-SystemHealth
C. Test-AvailabilityService
D. checkdatabaseredundancy.ps1
E. Test-ReplicationHealth
F. Test-SmtpConnectivity
G. Get-MailboxDataboxCopyStatus
H. Retry-Queue
I. Test-MailFlow
J. Get-MailboxDatabase
K. Test-SenderId
L. Get-SenderIdConfig
M. Test-MapiConnectivity
N. Test-OutlookWebServices

aimmko thank you, aimmko answered a bunch of these, I converted the Screen Captures from MAX to text. If people could answer any that would be great.
PART TWELVE:
--------------------------------------
Question 46 of 55
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for more than one question in the series.

Your network contains an Active Directory domain. The domain contains one site.

You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client Access servers, two Hub Transport servers, and three Mailbox servers.

The mailbox servers are members of a database availability group (DAG) named DAG1.

Users report that they fail to receive email messages from the Internet.

You review the message tracking logs and discover that the organization failed to receive any email messages from the Internet during the past hour.

You need to identify what is preventing the Hub Transport servers from receiving email messages.

What should you run from the Exchange Management Shell?
A. Test-WebServicesConnectivity
B. Test-MailFlcuN
C. Get-MailboxDatabase
D. Test-MapiConnectivity
E. Test-ReplicationHealth
F. Test-AvailabilityService
G. Get-SenderIDConfig
H. Test-SMTPConnectivity
I. checkdatabaseredundancy.ps1
J. Retry-Queue
K. Test-SenderID
L. Get-MailboxDatabaseCopyStatus
M. Test-SysternHealth
N. Test-OutlookWebServices

aimmko thank you, aimmko answered a bunch of these, I converted the Screen Captures from MAX to text. If people could answer any that would be great.
PART ELEVEN:
--------------------------------------
Question 45 of 55
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for more than one question in the series.

You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains a Hub Transport server named Server1 and an Edge Transport server named Server2.

All servers are configured to use an internal DNS server named DNS1 for host name resolution.

You configure an Edge Subscription from Server1 to Server2.

You need to modify the delayed acknowledgment (ACK) settings of Server2.

What should you do?
A. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
B. From the Exchange Management Console (EMC), create a transport rule.
C. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
D. From the Exchange Management Shell, run the Set- ReceiveConnector cmdlet.
E. From the Exchange Management Console (EMC), disable the IP Block List feature.
F. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
G. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
H. From the Exchange Management Console (EMC), modify the properties of the remote domain.

Question 44 of 55
answer:could find any answer :(
Question 38 of 55
answer:Remove-OwaVirtualDirectory cmdlet, new-owavirtualdirectory, modify owa virtual directory
Question 35 of 55
answer: D create TXT, i cant seee other choice correct more than creating TXT
http://technet.microsoft.com/en-us/library/ff601760.aspx
Question 36 of 55
answer: set-owavirtualdirectory
Question 34 of 55
answer: set-dataavailibiltygroup
Question 33 of 55
answer: set-mailboxdatabase
Question 32 of 55
answer:Set-ContentFilterConfig
Question 26 of 55
answer: Delete all of the public folders from the public folder database
Question 31 of 55
answer: B. Install Active Directory Rights Management Services ',AD RMS

guys this is what i could answer, and and am sure of the answer 80% because i took them from Microsoft websites
all the best, i have exam tomorrow i hopw i will pass :(

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART TEN:
--------------------------------------
Question 44 of 55
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for more than one question in the series.

You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains a Hub Transport server named Server1 and an Edge Transport server named Server2.

All servers are configured to use an internal DNS server named DNS1 for host name resolution.

You configure an Edge Subscription from Server1 to Server2.
You deploy a monitoring server named ServerApp1.
ServerApp1 will send email notifications to administrators.

You need to ensure that ServerApp1 can relay email to the administrators through Server1.

What should you do?
A. From the Exchange Management Shell, run the Set-TransportSeryer cmdlet.
B. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
C. From the Exchange Management Console (EMC), create a transport rule.
D. From the Exchange Management Console (EMC), modify the properties of the remote domain.
E. From the Exchange Management Shell, run the Set-ReceiyeConnector cmdlet.
F. From the Exchange Management Console (EMC), disable the IP Block List feature.
G. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
H. From the Exchange Management Shell: run the Set-TransportAgent cmdlet.

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART NINE:
--------------------------------------
Question 38 of 55
You have an Exchange Server 2010 Service Pack 1 (SP1) organization named fabrikam.com.

Users access Outlook Web App by using the maillabrikam.com host name.

An administrator modifies the OWA virtual directory.

The users report that they can no longer connect to Outlook Web App.

You need to recreate the OWA virtual directory. The solution must ensure that the users can connect to Outlook Web App by using mail.fabrikam.com.

What should you do?

To answer, move the 3 appropriate actions from the list of actions to the answer area and arrange them in the correct order.
------------
-From Server Manager, reinstall the Web Server (IIS) server role.

-From the Exchange Management Shell, run the New-OwaMailboxPolicy cmdlet.

-From the Exchange Management Shell, run the New-OwaVirtualDirectory cmdlet.

-From the Exchange Management Shell, run the Import-ExchangeCertificate cmdlet.

-From the Exchange Management Shell, run the Remove-OwaVirtualDirectory cmdlet.

-From the Exchange Management Console (EMC), modify the properties of the OWA virtual directory.

-From Internet Information Services (IIS) Manager, enable Microsoft ASP.Net impersonation.

-From Internet Information Services (IIS) Manager, modify the properties of the OWA virtual directory.

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART EIGHT:
--------------------------------------
Question 35 of 55

You have an Exchange Server 2010 Service Pack 1 (SP1) organization named fabrikam.com.

A partner company has an Exchange Server 2010 SP1 organization named contoso.com.

You plan to implement federated delegation between fabrikam.com and contoso.com.
You need to identify which DNS records must be created to support federated delegation.

Which DNS records should you identify? (Choose all that apply.)
A. host (A)
B. mail exchanger (MX)
C. host information (HINFO)
D. text (TXT)
E. mail group (MG)
--------------------------------------
Question 36 of 55
Your network contains an Active Directory domain named contoso.com. You have an Exchange Server 2010 Service Pack 1 (SP1) organization.

External users access their email by using Outlook Web App.

You need to ensure that the external users can log on to Outlook Web App without specifying a domain name.

Which cmdlet should you use?
A. Set-OrganizationConfig
B. Set-OwaVirtualDirectory
C. New-OrganizationRelationship
D. New-OwaMailboxPolicy

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART SEVEN:
--------------------------------------
Question 34 of 55
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for more than one question in the series.

You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains the servers configured as shown in the following table.

Server name=Server1 and Server role= Client Access, Hub Transport
Server name=Server2 and Server role= Client Access, Hub Transport
Server name=Server3 and Server role= Mailbox
Server name=Server4 and Server role= Mailbox


The Mailbox servers are members of a database availability group (DAG) named DAG1.
You need to configure DAG1 to use a static DAG IP address of 192.168.1.100.

Which Windows PowerShell cmdlet should you run?
A. Set-MailboxServer
B. Set-DatabaseAvailabilityGroup
C. New-DatabaseAvailabilityGroup
D. Add-MailboxDatabaseCoPY
E. Add-DatabaseAvailabilityGroupServer
F. Set-MailboxDatabase
G. Set-ClientAccessServer
H. Set-ClientAccessArray
I. Set-PublicFolderDatabase
J. New-PublicFolderDatabase
K. Add-RoleGroupMember
L. Set-MailboxDatabaseCopy
M. New-MailboxDatabase

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART SIX:
--------------------------------------
Question 33 of 55
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for mqre than one question in the series.

You have an Exchange Server 2010 Service Pack 1 (SP1) organization.
The organization contains the servers configured as shown in the following table.

Server name=Server1 and Server role= Client Access, Hub Transport
Server name=Server2 and Server role= Client Access, Hub Transport
Server name=Server3 and Server role= Mailbox
Server name=Server4 and Server role= Mailbox


The Mailbox servers are members of a database availability group (DAG) named DAG1.

The organization also has a load balancing solution for Client Access. The load balancing solution has a virtual IP address that is available by using the mail.contoso.com host name.

You create a new Client Access array that uses the outlook.contoso.com fully qualified domain name (FQDN).
You need to ensure that all users connect to outlook.contoso.com from Microsoft Outlook 2010.

Which Windows PowerShell should you run?
A. Set-MailboxDatabaseCopy
B. New-DatabaseAvailabilityGroup
c. Set-MailboxServer
D. Set-ClientAccessServer
E. New-MailboxDatabase
F. New-PublicFolderDatabase
G. Set-ClientAccessArray
H. Add-MailboxDatabaseCopY
I. Set-DatabaseAvailabilityGroup
J. Set-PublicFolderDatabase
K. Add-RoleGroupMember
L. Add-DatabaseAvailabilityGroupServer
M. Set-MailboxDatabase

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART FIVE:
--------------------------------------
Question 32 of 55
You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The SMTP domain for the organization is contoso.com.

You enable the Exchange anti-spam features.
You need to specify a quarantine mailbox for the Exchange organization.

What should you do?
A. From the Exchange Management Console (EMC), modify the Content Filter agent.
B. Run the Set-ContentFilterConfig cmdlet from the Exchange Management Shell.
C. Run the Set-TransportConfig cmdlet from the Exchange Management Shell.
D. From the Exchange Management Console (EMC), modify the Recipient Filter agent.
E. Run the New-TransportRule cmdlet from the Exchange Management Shell.
F. Run the Set-OrganizationConfig cmdlet from the Exchange Management Shell.
G. From the Exchange Management Console (EMC), modify the Sender Filter agent.
H. Run the New-JournalRule cmdlet from the Exchange Management Shell.

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART FOUR:
--------------------------------------
Question 26 of 55
Your network contains an Active Directory forest named fabrikam.com. The forest contains an Exchange Server 2010 Service Pack 1 (SP1) organization.

All client computers run Microsoft Office Outlook 2003.
A server named Ex1 hosts all public folders.
You upgrade all of the client computers to Outlook 2010.
You need to remove all of the public folders from Ex1.

What should you do first?
A. Modify the offline address book (OAB) distribution settings.
B. Modify the properties of the mailbox database.
C. Delete all of the public folders from the public folder database.
D. Perform an offline defragmentation of the public folder database files.
--------------------------------------
Question 31 of 55
You have an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com.

All users access their mailbox by using Microsoft Outlook 2010.
You need to ensure that the users can prevent sensitive email messages from being forwarded to other recipients.

What should you first?
A. Configure Transport Layer Security (TLS) on all Send connectors.
B. Install Active Directory Rights Management Services ',AD RMS).
C. Run the Set-TransportConfig cmdlet.
D. Deploy Secure MIME.

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART THREE:
--------------------------------------
Question 25 of 55
You are a network administrator for a company named Contoso, Ltd.
Contoso has an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com. The organization contains the following Exchange servers:
Two Hub Transport servers
Two Edge Transport servers that have Edge Subscriptions

Contoso merges with another company named Fabrikam, Inc. Fabrikam has an Exchange Server 2010 SP1 organization that uses the fabrikam.com SMTP domain.

All mail exchange (MX) records for fabrikam.com point to the contoso.com Edge Transport servers.

You deploy a solution for Contoso to journal all email messages by using Hub Transport rules.

You need to ensure that all email messages received by fabrikam.com users from the Internet are journaled by the contoso.com Exchange organization.

What should you do?
A. From the Exchange Management Shell, run the new-accepteddornain -domaintypeinternalrelay command.
B. From the Exchange Management Shell, run the new-sendconnector -addressspaces fabrikam.com command.
C. From the Exchange Management Console (EMC), create an accepted domain that uses the authoritative domain type.
D. From the Exchange Management Shell, run the new-receiveconnector -partner command.
E. From the Exchange Management Shell, run the new-accepteddornain -domaintypeexternalrelay command.
F. From the Exchange Management Console (EMC), create an accepted domain that uses the internal relay domain type.

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART TWO:
--------------------------------------
Question 21 of 55
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2.
You have a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1).
You plan to install the following Exchange Server 2010 SP1 server roles on Server1:
Mailbox
Client Access
Hub Transport

You need to prepare Served for the planned installation.
You import the Server Manager module for Windows PowerShell.

What should you do next?
A. From Windows PowerShell, run add-windowsfeature net-framework,rsat,adlds.
B. At the command prompt, run servermanagercmd and use the Exchange-Typical.xml template.
C. From Windows PowerShell, run add-windowsfeature net-framework. From the Exchange Server 2010 installation program, select the Automatically install Windows Server roles and features required for Exchange Server check box.
D. At the command prompt, run servermanagercmd and use the Exchange-Elase.xml template.
E. At the command prompt, run setup /pl. From the Exchange Server 2010 installation program, select the Automatically install Windows Server roles and features required for Exchange Server check box.
F. From Windows PowerShell, run add-windowsfeature net-framework,rsat-adds,web-server,web-basic-auth.

I converted the screen captures from MAX to text.
The following are the questions from the Screen Captures, but there are no answers. So if people could answer some of them that would be great.
PART ONE:
--------------------------------------
Question 6 of 55
You have an Exchange Server 2010 Service Pack 1 (SP1) Mailbox server named Server1.
You need to ensure that a copy of each email message modified or deleted by a user named User1 is retained on Server1.

What should you do?
A. Create a personal tag.
B. Enable single item recovery.
C. Enable message tracking.
D. Enable a litigation hold.
E. Create a retention policy.
F. Create a journal rule.
--------------------------------------
Question 11 of 55
Your company has two offices. Each office is configured as an Active Directory site.
The offices connect to each other by using a congested WAN link.
Each office has a direct, high-speed connection to the Internet.
Each site contains two Exchange Server 2010 Service Pack 1 (SP1) Hub Transport servers.
You need to ensure that email messages sent to the Internet from the Exchange organization are never routed over the WAN link.

What should you do from each site?
A. From the Exchange Management Shell, run the Set-TransportConfig crndlet.
B. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
C. From the Exchange Management Shell, run the Set-SendConnector cmdlet.
D. From the Exchange Management Console (EMC), modify the properties of the Receive connector.
E. From the Exchange Management Console (EMC), modify the properties of the Send connector.
F. From the Exchange Management Console (EMC), modify the properties of the remote domain.
G. From the Exchange Management Shell, run the Set- ForeignConnector cmdlet.
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.

Hi Piero,
about the Max pics, what do you think about:
- the question of modify the delayed ACK ?
- The drag and drop question for OWA

For the ACK i dont know :)
For OWA drag and drop i think:
http://technet.microsoft.com/en-us/library/ff629372.aspx

- remove owadir
- create owa dir
- restart IIS (but there isnt this entry in the option.)

Thank you in advice!

Passed today with 900+. Prepared on the Fiber and Combined (plus study and working knowledge) more than 80% of the questions were from these dumps. Take a closer look to Max pics, as there are questions not in the dumps. Found the right answers on technet.. 3/4 questions in my set were in those.
Good luck to all..

I compare 70-662 v2012-03-22 by MajdSalha 420q with this dump and it this dump is misses section A/B/C with 78 questions. Are those questions out-of-date and obsolete? What about 16 new questions Darren mentions?

hi, i'll attend the exam this friday and i'm studying this dump and the manual very hard!
Anyone have the drag and drop or pratice questions?

Best regards and greetings to COMBINED!

Pass today Malaysia.Score 775.Study this dump and exchange 2010 experince.16 new question

@Rashe and Mario, study this dump well, you will pass!!!!!

Remembered another one. Like most questions it adds a lot of nonsense then gets down to what you really need to do.

[paraphrased]
Your organization implements SPF. What cmdlet would you use to verify/test the configuration?

I said "Test-SenderID"

Again, there were about 12 answers and most of them were nonsense or you should already know they do not belong.

This is the only real article on the subject. Seems the answer is correct.
http://technet.microsoft.com/en-us/library/aa998605.aspx

bop's answer for DAG health alerts seems to be correct. CheckDatabaseRedundancy.ps1 is installed as a scheduled task for mailbox servers and can be run interactively.

http://technet.microsoft.com/en-us/library/dd351258.aspx#CheckDBRedun

Passed test today with a 825. Had about 6-8 new questions.
Here is one (Not Verbatim):
You have a DAG and the DBs are mounted and Healthy. You want to alert an administrator when the status changes. What cmdlet would you run?

I chose "checkdatabaseredundancy.ps1"

Anyone else can verify? I know this command can be configured to send email alerts so it is what i chose.

It was a 12 answer choice question and most were just wrong like Test SMTP. TEST Mailflow, Get-mailbox etc..

Looks like he added more questions. But Combined please comfirm I am passing this along to a colleague, thanks,

Hi Combined is this the old dump without unnecessary parts?
Or something new?
I'll shedule the exam for monday 30.04

Best regards