Pass Your Microsoft 70-662 Exam Easy!

I passed the exam today after my third attempt, scored 788, there was still some 8-10 new questions even after the addition of the 15 new questions, some are revamped versions of old questions, dump is good but I only had about 20 questions that were from these dumps the rest were new or revamped questions so study technet articles and work with the product which is what I did, do not rely on just the dumps or you will find it difficult

combined..please provide the link to the new 181 question ??

Combined,
May you tell me why you shrink your dump from 281Q to 181Q in your next dump?
Are those questions you removed obsoleted?
THX a lot

8 of 15 = M Set-MailboxDatabase <name> -RPCClientAccessServer outlook.contoso.com
http://social.technet.microsoft.com/Forums/ta/exchange2010/thread/b86357f5-ad4f-4766-bbb1-edf90c2219c0

9 of 15 = B Set-DatabaseAvailabilityGroup -Identity DAG1 -DatabaseAvailabilityGroupIpAddresses 192.168.1.100
http://technet.microsoft.com/en-us/library/dd297934.aspx

10 of 15 = hmmm..ok..D but I'm not sure about A. Definately a txt record for proof of ownership of the domain is required, and a cname record in your public facing dns pointing at a public facing access server running the autodiscover service.

11 of 15 = B set-owavirtualdirectory -Identity "owa (default web site)" -logonformat username -defaultdomain contoso.com

12 of 15 = E ?? I think you would create a new receive connector to receive mail only from the ServerApp1 ip address and to accept non-authenticated connections.

13 of 15 = D Set-ReceiveConnector "Custom App Receive Connector" -MaxAcknowledgementDelay 0
http://technet.microsoft.com/en-us/library/dd351046.aspx

14 of 15 = H test-smtpconnectivity
http://technet.microsoft.com/en-us/library/ff849710.aspx

15 of 15 = D
http://technet.microsoft.com/en-us/library/dd351258.aspx#CheckDBRedun

Hi,

I just uploaded the best next dump (181questions) after your contribuate Normally, it will GREAT!!!

@Dario .. yeah ok ..agreed .. I think ..

Yeah..sorry..hard coded Nos:

1 of 15 = B set-contentfilterconfig -quarantinemailbox quarantine@contoso.com
http://technet.microsoft.com/en-us/library/aa996791.aspx

2 of 15 = C Ummm...yeah!

3 of 15 = B Install AD RMS
http://technet.microsoft.com/en-us/library/dd638140.aspx

4 of 15 = C Fabrikam.com needs to be accepted and authoritve for emails to be recieved in the contoso.com domain.

5 of 15 = C 2008R2 uses the add-windowsfeature to install prerequisites and Exchange SP1 introduced the "Automatically install Windows Server roles and features required for Exchange Server" check box.

6 of 15 = D Obviously

7 of 15 = Now..I must be missing something here. I think that the send connector should be scoped so that it can only be accessed by HT servers in the same site and therefore not over the WAN. But this can be done via the set-sendconnector with the -isscopedconnector parameter from the Shell (Answer C) or by modifying the send connector properties from the EMC (Answer E).

.. ok I'll go with the shell (Answer C)

Egg, I'm going with Set-SendConnector.

As you (and I in an earlier post) said, you can configure the scoped connectors both ways. But, maybe, the answer about using the EMC is wrong because is about a SINGLE connector. With the EMS you can configure both connectors with the same command (maybe pipelining a Get-SendConnector).

What do you think?

Q13 - D
see Muneer's post

Q14 - H
Very easy.
http://technet.microsoft.com/en-us/library/ff849710.aspx

Q15 - D
http://technet.microsoft.com/en-us/library/dd351258.aspx

Q10 - A and D
http://technet.microsoft.com/en-us/library/ff601760.aspx
The article talks about a CNAME recorda, but an A record will do the same, and a record to configure the autodiscover is needed anyway.

Q11 - B
Easy.

Q12 - E
http://technet.microsoft.com/en-us/library/bb232021.aspx
I think you need an anonymous relay connector

Your thoughts on the following please:

Question 11 of 55
Your company has two offices. Each office is configured as an Active Directory site.
The offices connect to each other by using a congested WAN link.
Each office has a direct, high-speed connection to the Internet.
Each site contains two Exchange Server 2010 Service Pack 1 (SP1) Hub Transport servers.
You need to ensure that email messages sent to the Internet from the Exchange organization are never routed over the WAN link.

What should you do from each site?
A. From the Exchange Management Shell, run the Set-TransportConfig crndlet.
B. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
C. From the Exchange Management Shell, run the Set-SendConnector cmdlet.
D. From the Exchange Management Console (EMC), modify the properties of the Receive connector.
E. From the Exchange Management Console (EMC), modify the properties of the Send connector.
F. From the Exchange Management Console (EMC), modify the properties of the remote domain.
G. From the Exchange Management Shell, run the Set- ForeignConnector cmdlet.
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.

I think that this can be accomplished by setting the send connector as scoped. The connector can then only be used by Hub Transport servers in the same Active Directory site. But this can be set by using the set-sendconnector with the -isscopedconnector parameter or by modifying the properties of the send connector.

I can't see any way of achieving this via modifying the accepted domain unless I'm missing something, or by any of the other options.

Your comments please???

Q8 - M
Easy. Found also this: http://blogs.technet.com/b/ucedsg/archive/2009/12/06/how-to-setup-an-exchange-2010-cas-array-to-load-balance-mapi.aspx

Q9 - B
http://technet.microsoft.com/en-us/library/dd351172.aspx

Exam K
Q5 - C
cannot find any article, but it seems very likely the correct answer

Q6 - D
Very easy

Q7 - ??? (C or E)
http://technet.microsoft.com/en-us/library/aa998662.aspx
you can go both ways to configure the scoped send connector

Exam K
Q2 - C
Is there something to explain? :)

Q3 - B
Also too easy to require explanation, right?

Q4 - I'm going with C: journaling requires transport rules, not connectors. And anyway if the domain fabrikam is not configured in the contoso organization, emails to fabrikam users will not be received!

PS
I'm following the "hard coded" order for question numbers

Question 45 of 55
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for more than one question in the series.

You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains a Hub Transport server named Server1 and an Edge Transport server named Server2.

All servers are configured to use an internal DNS server named DNS1 for host name resolution.

You configure an Edge Subscription from Server1 to Server2.

You need to modify the delayed acknowledgment (ACK) settings of Server2.

What should you do?
A. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
B. From the Exchange Management Console (EMC), create a transport rule.
C. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
D. From the Exchange Management Shell, run the Set- ReceiveConnector cmdlet.
E. From the Exchange Management Console (EMC), disable the IP Block List feature.
F. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
G. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
H. From the Exchange Management Console (EMC), modify the properties of the remote domain.

Ans. From the Exchange Management Shell, run the Set- ReceiveConnector cmdlet.

Exp. hxxp://technet.microsoft.com/en-us/library/dd351046.aspx

I'll try to answer q's one by one with supporting technet article..

Q1 - B
http://technet.microsoft.com/en-us/library/bb123746.aspx

I am going to write exam on this saturday,,, someone please tell me if this is valid dump.

Item 1 of 15 ->i dont think journalling can be done by creating an accepted domain and authoritative domain type.

Item 2 of 15 -> is mmodify the properties of accepted domain correct ??

Item 2 of 15 -? Host A should also be one of the answer

Item 11 of 15 - > I think answer is incorrect

After having confusion on these. not sure if other answers are correct.

Hi Sanjay, what answers do you think are wrong (k section)? Maybe we can help each other with the answers

The new question added in section K has almost all wrong answers. Can someone please post the right answers as i m unable to find few.

Failed with 610 Points in Germany .. Microsoft changed the Pool. About 20 new Questions. Hardcore Exam!