Pass Your Microsoft 70-243 Exam Easy!

hi, the file has an error, it can be loaded again.
TKS

VERY VALID!
Passed today with 830+

Did everything advised in the previous post about utilizing the Aiotestking site and Jugganaut and other "corrections" over at rajeev's dump and used MFK dump, all questions were from both these dumps and I answered every question as provided by the dumps and the "corrections" and still failed with 680 points, so just these bullshit dumps cause they're full of mistakes and just study...

Passed with 754 today, this is a difficult exam, however the questions in the official exam are closer to MFK's dump than Rajeev's. I strongly recommend you use MFK dump for the drag and drop questions, however go to Rajeev's dump page and read through the comments for corrections done by Jugganaut and others.

Finally, leverage the aiotestking website as I've added corrections to some of the answers under the alias of "Indica". Good luck peeps.

Is this dump still valid?

IS this dump still valid?

IS this dump is still valid in India, please confirm

Hi...

I want to write ... "Administering and Deploying System Center 2012 Configuration Manager: 70-243 Exam" ....

so if any one having...updated dump...can u plz...send me...plz plz plz plz plzzzzzzzzzz

Passed today 781, UK - all questions are in this dump. Put got a different answer on the - 2 forests litware & contoso - question & as everyone else seems to get 822, would suggest using the answer in the dump.

Paased today with marks of 809. Its valid dumps..

passed with 837... valid in INDIA

good still valid in Kuwait . passed with 775.

Great dump! Passed 8/14/13 US with 836. Only had 1 new question about log files.

does anyone know if the content is likely to change with SP2 release up coming?

@ssuper2k Thank you very much for taking the time to answer back. Really appreciate it.

Passed with 86X.valid in VA, USA

@Ruth,
Any I5 with at least 8GB memory and an SSD of at least 160GB

Please can someone tell me what laptop to buy for me to practice with SCCM.2012. Will really appreciate it.

Why do the votes keep going down for this dump every day? Is there something wrong with it?

Russia

887

Passed by this dump . 1 question not from dump . maybe

Dump is valid. i cleared exam with 887 marks on 12th July.

This is a valid dump. All the question were from the dump only. My score is 887. Few question answers are incorrect in the dump. Please validate.

Passed today with 812 Marks. All the the questions were from this dump only. Some answers are wrong. So Please validate the answers and attend the exam. Thanks for MFK for posting. Ganesh R from India

Passed today with 887 Marks. All the the questions were from this dump only. Thanks for MFK for posting. Raja A from India

MarkH from United States - Jul 09 2013, 3:54 PM Report Spam
I plan on taking the exam within the month (July). I have gone through installing/configuring sccm 2012 from scratch, went through CBT Nuggets training and Reading through sccm 2012 Unleashed. Any chance of getting "the 5 new questions on the exam" that everyone is talking about? Thanks so much for your help

Valid Dump

Still valid. Passed with 880. Exam A, Q8 - the answer is B: Configuration Manager Client.

You don't _need_ the MDT to create a build & capture task sequence. But you cannot complete the creation of a build & capture task sequence without providing the location of the SCCM client. It is one of the steps when you create a task sequence.

Hi friends, this dump is still valid in Chennai,INDIA.passed today with 812.
only 5 out of questions and some jumbled questions.

@US MCP, hi sir did you only used this dump or also
with the CBT nuggets? Please advise as ill be getting this exam
and dont have enough time to do trial and error on reviewing each available dumps. :)

I think the new blog looks awesome, I bet our man Landon will be a big teiche!!! Techie's are nerds, but they're also really really cool!!! Katie

Just passed it easy (United States), only saw 2 questions not in this brain dump. Good stuff.

Hi,

I find only 78 questions in this dump. Is this will be sufficient to complete the exam or am I missing something. Please suggest.

Thanks

Passed 810, But 4 questions out of dump

Passed - 810
1 new question

Passed with 880, 46 questions with some new ones

Hi all,

Is there any second shot available yet?

Can anyone send me links to the MOC of good manuals?
ssuper2k △T gmail

Thanks.

Hi,

This is Sudhakar from India. Today i passed this exam with 887 Marks. Thanks to MFK given valid dump. All questions were from this dump only.

Passed today in Switzerland with 906 Pt. 46 Questions, all from this dump, some are a little different, but it doesn't matter.

Dump valid in Melbourne Australia.Passed with 860+.All Qs from dumps but the answers are jumbled around.

Dumb valid in Spain. Passed today with 860+ marks. All questions from this dumb but be careful, some answers may be wrong. Thanks MFK

Valido en España. Superado hoy con un 860+. Todas las preguntas de este dumb, pero cuidado que algunas respuestas pueden ser erroneas-

Still valid in UK. All questions matched.

Valid, out of 46 questions, all from this dump. Maybe a couple of mistakes I did or in the dump as I scored a bit below 1000.

Thanks a million for this great dump!

Valid. Passed.

Passed also with 887 yesterday. 3 new questions and two of them where drag-and-drop .

1 of them were the commands / order for preparing an configuration baseline.

Still vaild in Australia. Just passed the exam 887/1000. Thank you MFK

Passed with 868 - Still valid in US

Passed with 889, thanks

Passed with 775.
Still valid in Poland.

@Alcatraz- Found them on Newsgroups. GoodLuck!

Still so Valid in Egypt, Passed yesterday with score 868/1000

all Q are the same in the dumb, Just 1 new Q.

Have a nice day, best for all

@Belgium from Netherlands
Kan je me graag mailen; alcatraz2013@outlook.com, ben op zoek naar die filmpjes, heb binnenkort examen. Alvast bedankt en success met je examen.

MFK and Jirgo,

you need to install wsus first. sup config does not install wsus automatic. this is tested and verified. In sup config widows, its specifically mentioned, you must install wsus on the sup site server first.

Volgende week het examen gepland. CBT + VM + Deze set geleerd.

@Chand @TechPupil

Te correct answer is C: a software update-based client installation

As Windows Firewall blocks File and Printer Sharing you can not use GPO or Client Push methods

Dump is valid in Brazil, but the issue with the study randomly.

Dump é válido no Brasil, porém estudo as questão com a forma aleatória.

@Techpupil I think the question is steering you toward a software-update based installation. While a GP-based installation would work, if you needed a quick and dirty global install, you could simply enable software-update based installation and WSUS would do the rest. The infrastructure is already enable for everything to make it happen, whereas a GP-based installation would require some extra configuration in GP. IMO

Chand :

What is the answer for the below question? Iam little confused.

Your network contains a Windows Server Update Services (WSUS) server.
All client computers are configured as WSUS clients.
All of the client computers have Windows Firewall enabled.
Windows Firewall is configured to block File and Printer Sharing.
Users are not configured as local Administrators on their client computers.
You deploy System Center 2012 Configuration Manager.
You need to identify which methods you can use to deploy the Configuration Manager client to all of the client computers.
Which client installation methods should you identify?

A. a logon script installation
B. a manual client installation
C. a software update-based client installation
D. a Client Push Installation
E. an Active Directory Group Policy-based installation

Correct Ans.: E

@ mike there are 46 questions in the 70-243 exam. You can get 1000 points and you need 700 points to pass the exam. This Dumpis still valid, but i think there are some wrong answers in it.

Dump valid in Colombia.

Passed with 950.

(Valido en Colombia, aprobé con 950)

Passed the exam today with 906. All questions from this dump. Many thanks!

RAJ from Malaysia
Dump 100% valid in Malaysia Passed with 832.

Still valid dump. passed with 887 marks.

Still valid! Thx.

@Chand from India: the answer is C. The firewall will block the client push installation and the GPO installation. For A and B you need administrative rights. The WSUS installation is performed with local system account and since they are WSUS clients the firewall will be opened for this type of installation.

Passed this exam with the score 868/1000. This dumps are 100% valid. Study these dumps with the technet site and cbt nuggets material is enough to pass this exam!!

Good 880!
1 new question

Passed with 812, still valid! Thnx guys!

Passed with 855, still valid in India.

Valid in Germany, passed today with 868

What is the answer for the below question? Iam little confused.

Your network contains a Windows Server Update Services (WSUS) server.
All client computers are configured as WSUS clients.
All of the client computers have Windows Firewall enabled.
Windows Firewall is configured to block File and Printer Sharing.
Users are not configured as local Administrators on their client computers.
You deploy System Center 2012 Configuration Manager.
You need to identify which methods you can use to deploy the Configuration Manager client to all of the client computers.
Which client installation methods should you identify?

A. a logon script installation
B. a manual client installation
C. a software update-based client installation
D. a Client Push Installation
E. an Active Directory Group Policy-based installation

Still valid in India Passed with 850.
One small tips, study this dump and the next one. While studying go through all the answers because in the exam the question are same but they changing the answer choice. For e.g, if the answer was option (a) in dumps, in real exam it will be in option (d)

If anyone have suggestion, please post it here

Still valid in India, passed 887

Still vliad, pass today score 887

Valid , passed yesterday with 800+ , only one new question and there might be some wrong questions on this dump.

Valid in Bangkok. Passed, 887. No new questions.

Hi, still valid in France, I passed today 868.Thanks for the great dump !

Dumb valid in Spain. All question from this dumb. Thanks!!

Hi, still valid in Holland, I passed today 887.Thanks for the great dump!

valid , passed with 887 :)
tnx

Passed today with 8** in the UK so slight differences but the dump is 95% correct

Hi Gor,
hm, I think you are right. The point is, that we have to 'identify whether there is a replication issue'.
We can't actually see what happend with the collection in the log, but it shows us all replication errors between the sites.
Sven

dump is %100 valid no new question in Turkey

This dump is valid. I pass today with score 850. In my exam, i see 3 new questions.

Haven't you guys figured it out yet? That the reason for the few wrong answers is to keep you from scoring perfect on the exams. If everyone keeps getting 100's on the test then the test will change and more questions will be added which means more questions for the next person to have to cram for this thing.

100% Valid All question from this dumb (but sure there is a few wrong answers)
Passed with 906 score

and just there is small difference on the answers for examples :

Exam (B) Q (5) answer on the exam was Active Directory User and Group Discovery on every sites)something Like this any way it wasn't The answer on the Dump But its the same (Every Sites)

Passed 906.

All Questions from this dump but a few are wrong. Good luck!

Still valid in Jeddah, I got 887.
Thanks.

Sven:
That's what you wrote:
"Q61: Colleval.log: Logs when collections are created, changed, and replicated to child sites as well as deleted by the Collection Evaluator. So here I would think Colleval is the right solution."
But the statement is: "none of the collections (that were) created on Site1 are displayed on Site2". So Colleval.log may contain information about the collection-creation on Site1, but nothing about replication, because the replication was not successful ("You need to identify whether there is replication issue between the sites.") - that's why nothing to log. So we have to search for (detailed) signs about replication issues, that's why the Rcmctrl.log file is what we need.
Meiner Meinung nach. :-)

@MD, you failed because of no studying? what the fuck does that mean? you didn't study this dump or you did study the dump and still failed? because if it's the latter part of that question then you sir are a big Dummy!

Q61: Colleval.log: Logs when collections are created, changed, and replicated to child sites as well as deleted by the Collection Evaluator. So here I would think Colleval is the right solution.

Q59: InventoryAgent.log Client log file Records activities of hardware inventory, software inventory, and heartbeat discovery actions on the client.
The inventory just doesn't work on one client, so we have to look into a client log file. Dataldr.log is a server log file and onlz for the hardware inventory. But both doesnt work. So InventoryAgent.log should be the right log file.

I did this exam today. Passed. Started to going through the parts of questions where I missed points to see if there are some wrong answers.
But I can definitely say this file is valid.

Q12: I would say the answer is despool.log, because we have to check the data transfer between the sites and not the database (SQL) replication. Rcmctrl.log checks only the database replication between sites. Despool.log logs the data and date move transfer between the sites.

Q20: Here should be the answer filesystemfile.log and Inventoryagent.log. Dataldr.log logs the hardware inventory and that works fine. Filesystemfile.log logs the WMI profider for software inventory and file collection.

Q21: I would say it is Rcmctrl.log. I think you should look into the database replication log file and that is Rcmctrl.log

Failed today because of no studying but the exam is still valid!!

Hi,
Passed today with 925, only 1 question was not on this dump(MFK) but from other dumps.
Thanks MFK and others involved.

Hi, passed today with 906, only one new question, means there are a few wrong answers.

From MFK Dump

Q8 - only configmgr client package is needed, there is no MDT integration, so MDT and USMT are not needed, Sysprep is built in with Windows 7, no need to create the package.

thanks MFK and Meee!

Hi,
Passed on 16.04.2013 (switzerland) and still valid. got 813.
3 questions were not on this dump but from other dumps. this dump is enough
Thanks!!

Q46: The answer is right. You have to install WSUS first. If you install the Software update point it dosn't install WSUS for you. And if you install the Software update point first and than WSUS I think it will not really work. Will try this in the next days. But any way, the right way is to install WSUS first and than the Software update point on top.

Q8: You do not need the MDT for Build and Capture Sequence. However, the wizard will ask for the location of the CCM software. That you do need.

On the Install Configuration Manager page, click Browse. Select a Deployment Package dialog box, click CCM APP Package(which is the prerequisite mentioned in the question) and then click OK.

Previous post should read Q15

Q8: You should select Software Update and Group Policy as deployment of any software via GPO uses elevated permissions and does not require File and Print Sharing to be enabled. http://social.technet.microsoft.com/Forums/en-US/configmanagerdeployment/thread/44d9e134-a77d-4261-94da-e9e087b8a6a0/

This dump is 100% valid, received a 8** yesterday. Thanks

Passed this yesterday in US with a 770+ score. Some wrong answers, but like any of these, you should know the material and not just memorize dumps. These are good to add to your studying. Good luck everyone.

Valid dump, passed the exam with 925 this morning. Thanks MFK and others involved.

Dump valid, passed with 8**, thanks to MFK & others.

Straight from Technet:
"The software update point site system role must be created on a server that has WSUS installed." So answer in dump is correct and installing SUP first is wrong.

Exam A Q8 is wrong (either the question or the answers..).
The only correct answer is the CCM client. Since the capture is initiated by the Windows client, sysprep is already there. If multiple answers are indeed required, sysprep would be the other one (because it is mentioned in the wizard),

MDT is not an application package. It's a toolkit to give you greater control over what your sequences do.
A USMT package is used when using MDT integration. Which isn't mentioned in the question so we'd have to assume MDT is not available.

Dump is still Valid 05.04. Score >800

Hey jorgio. Thank you for the clarification.
Have a great day! :)

I contacted a friend trainer . for him the answer is O.
when you install a sofwrare update point on server3, it installs all prerequisites, in this case WSUS.
but I agree with you, some answers are very highly debatable.
but most are good.

Hi MFK
no problem I understand ;-)
however, you have added a lot of screenshots, it's great.
thank you for this very good dump.
Have a nice day.
regards

@jorgio

That is one of the debatable questions I mentioned in my previous comment.
Technet states:
"The software update point site system role must be created on a server that has WSUS installed."
(http://technet.microsoft.com/en-us/library/gg712312.aspx#BKMK_InstallSUP)
The question was: "what should you do first?"
Well, technet says that first you'd need to install WSUS and then the SUP. Is that what Microsoft wants you to answer? Who knows?!

Hey all,
This dump should get you about 850-900 points in the exam.
It probably contains a few wrong answers, but some of the questions in here are highly debatable and what Microsoft considers to be the right answer is anybody's guess. Some of the questions are based on semantics, some on best practices and some have just plain stupid answer choices.
With that said, the best of luck to you all.

Hi,
887 passed.
I'm not sure for the answer concerning this question :
administrators currently apply software updates to servers manually. You discover that Server4 was never updated.
You Need to centrally manage software updates for all of the servers by using the configuration manager. What should you do ?
your answer is : M
but if you are on sccm 2007 it's ok.

for me, the good answer is O. Because when you install a sofwrare update point on server, sccm 2012 install too the prérequisites, so WSUS.