Pass Your Microsoft 70-414 Exam Easy!

Passed yesterday with 8XX.

Passed scored 720 thanks to all of them 5 new questions studied five dumps this one, omar 95q, okan 97q corpLD 95q and MaxB 94q few of them are wrong and not related answers at all.

To All,
Did the exam, no new questions
In the latests dumbs all anwsers are right
I just now took this exam and pass today Scored 890.
Thanks to vinayagamoorthy Sivapathasuntharam sivaskaran

not valid

I passed 890 with Okan Dump.

http://www.examcollection.com/microsoft/Microsoft.BrainDump.70-414.v2013-03-28.by.Okan.95q.vce.file.html

Still valid in Germany, passed today, some wrong answers. Thanks

This dump is not valid..
Same questions but the answers are wrong.

Not vaild :( :( . score 490 :'(

Omar's dump http://www.mediafire.com/?z5y55i1do2l8osc

Passed today with 813, Omar's dump is valid and useful for this test still.

Some of the questions had slightly different answers or different phrasings of the same answer, but if you have half a clue about the content, and you paid attention studying the dumps, you'll do fine.

How to set bandwith limits on a vnic:
http://technet.microsoft.com/en-us/library/hh848457(v=wps.620).aspx

Set-VMNetworkAdapter [-VMNetworkAdapter] <VMNetworkAdapterBase> -MaximumBandwidth <Int64>

@Prepdaddy, I believe the required settings are still on the vNIC (which is connected to the vSwitch, but the settings are on the vNIC):
http://technet.microsoft.com/en-us/library/jj679878.aspx
What's New in Hyper-V Virtual Switch
"You can also create different Quality of Service (QoS) polices for each virtual NIC."

Changed the answer for Exam D, Q:15 (thanks also to Henk the "denktenk") to c: The settings of the virtual switch
http://technet.microsoft.com/en-us/library/hh831823.aspx and http://technet.microsoft.com/en-us/library/hh831679.aspx Search for "Hyper-V QoS". Quality of Service (QoS) Overviewtechnet.microsoft.com.

Following is a list of capabilities that enhance Hyper-V Virtual Switch usability:

1:) Bandwidth limit and burst support: Bandwidth minimum guarantees amount of bandwidth reserved. Bandwidth maximum caps the amount of bandwidth a VM can consume.
2:) Explicit Congestion Notification (ECN) marking support: ECN marking—also known as Data Center TCP (DCTCP)—enables the physical switch and operating system to regulate traffic flow such that the buffer resources of the switch are not flooded, which results in increased traffic throughput.
3:) Diagnostics: Diagnostics allow easy tracing and monitoring of events and packets through the virtual switch.

@JP
ADE
http://technet.microsoft.com/library/hh427293.aspx
hdd < 2TB and 2003 sp2 is supported

@Long from Vietnam - (Mar 13 2013)
You say: "1/ Question C-12, I think the answers should be: A - C - D. P2V by SCVMM 2012 SP1 not should support Windows Server 2003 R2"

You're right about SCVMM2012 SP1 not supporting 2003R2, but the question does only say SCVMM2012 (nothing about SP1).

I got the CA CRL question. So it isn't stale at all. Exam is composed of 39 random mixed questions across the four skills being measured.

Passed this one these days. Got a 8xx score. Not perfect but enough. Got only one new question on one of the case studies and one q with modified answers (round robin q). All other qs still the same.

woops- I meant "Exam A questions are stale"

this CA CRL question is not in the test anymore- so don't worry about it
exam questions are stale now

thank omar i give test today and pass using omar dump
i get 82% so happy no i am mcse
i get best job and car and girl

thank friends , passed today using good omar dumb.
thank omar
test is 82% score , now I'm mcse
i get a best job now and car and girl too

Beware

Figarro
quantum2by2

Are microsoft undercovers - trying to sabotage the dumpsters
Both from the US
posting on the Mar 18 2013 "saying exams have changed"
typing style the same
even lie the same
"only 4-5 questions were similar"
"best 45-50% accurate"

dumps are still good my friends
be quick but - last change was 5 Feb , so maybe May 5 will be the next one

hurry

@Sy @PrepDaddy: Agree. I forgot that we first need a restore.

Att. Sy, and all others, thanks for sharing
So correct answer is:
1. restore a copy of the CA's Private key
2. By using certutil, resign the CRL, and then extend the validity period of the CRL
3. copy the CRL to the web server

Correct?

@Esha
@sysmita: Exam demnächst. Pleace contakt
Thanks.

http://blogs.technet.com/b/askds/archive/2011/04/07/designing-and-implementing-a-pki-part-v-disaster-recovery.aspx
CRL Re-signing:
CRL re-signing is a manual process whereby the Administrator can use the CA's backed up certificate and private keys to re-sign an existing CRL file.

So correct answer is:
1. restore a copy of the CA's Private key
2. resign the CRL
3. copy the CRL to the web server

880

Att. JP from Netherlands
Regarding: E: B Q: 14
Thank you for your input!
Your suggested answer (same actions but difference in sequence of the actions to be taken in regards to my suggestion) definately makes more sence:
1: By using certutil, resign the CRL, and then extend the validity period of the CRL
2: By using Certutil, republish the CRL
3: Copy the CRL to the Webserver farm

Because you should first create the CRL, which certutil does. But that just CREATES the CRL, you than have to make it available by placing the CRL on the right location on the webservers.
Thank you!

Hi, MAXBOX from Iran, Islamic Republic of ,

How much score you got . ?

ADatum Q10: I think this should be answer A.
You must export the Server Auth Cert from the side where the webserver resides and the tokensigning from where the accounts reside. (as far as I understand)

Exam D, Q27. All we need for a Live Migration are two hosts with Hyper-V and a virtual machine with a virtual disk (or virtual FC disk).
We don't need any shared storage, so not even iSCSI.
We don't need failover clustering services at all.
So answer is Option 1: Server1+Server2 Hyper-V Server Role.

Exam D, Q19: Answer B, not D.
D is about Cross Certification. We don't need that, we only need trusting both Root-CA's in both domains.

THX MAXBOX from Iran, Islamic Republic of

upload all question
http://www.4shared.com/folder/qaXIC_DS/070-414.html

Omar still valid in Canada. Passed today with 8xx +. All questions from the dump.
Guys, thank you again!!!

About Exam B, Q1: Do we need Config.Manager? I think just WSUS is enough to deploy updates to all virtual machines (which are just like normal computers) and client computers. Also with WSUS we can generate the report.

So I would say:
C. One WSUS server integrated with SC2012 VMM.

(and for just the virtual machines and client computers we actually dont even need SC2012 VMM but there's no answer without that)

Almost agree with PrepDaddy, who says:
1: By using certutil, resign the CRL, and then extend the validity period of the CRL
2: Copy the CRL to the Webserver farm
3: By using Certutil, republish the CRL

I would make that:
1: By using certutil, resign the CRL, and then extend the validity period of the CRL
2: By using Certutil, republish the CRL
3: Copy the CRL to the Webserver farm

Because you should first create the CRL, which certutil does. But that just CREATES the CRL, you than have to make it available by placing the CRL on the right location on the webservers.

@ poose could u plz send your vailed dump to likenoother175@yahoo.com ASAP my exam is soon
thanks

#poose what answers did you change?

Hi Guys

Passed today with the new dump

I will create a new one and share it this weekend, no time yet.( or share your mail address)

I recommend to watch Training signal videos

This dump is not valid, i do not recommend to use this one.

Around 18 questions are wrong. Failed using this dump and scored 100% every time. maybe use a later dump?

Tomorrow i will take exam with the newest dump i''ve just received.

I also learned from Training Signal videos and i failed with this dump last time.

I will confirm tomorrow if the dump is valid or not before I can share it, the dump got many different answers than this one by the way.

I will keep you guys informed.

Exam E: Question 14
Your network contains a Hyper-V host named Hostl. Hostl hosts 25 virtual machines. All of the virtual machines are configured to Start automatically when Hostl restarts.

You discover that some of the virtual machines fail to Start automatically when Hostl restarts and require an administrator to Start them manually.

You need to modify the settings of the virtual machines to ensure that they automatically restart when Hostl restarts.

Which settings should you modify?
A: Memory weight
B: Maximum RAM
C: Startup RAM
D: Minimum RAM

Answer : Startup RAM, Right ?
http://technet.microsoft.com/en-us/library/hh831766.aspx

E: B Q: 14
Your network contains an Active Directory domain named contoso.com. The network has an Active Directory Certificate Services (AD CS) infrastructure. You publish the certificate revocation list (CRL) to a farm of Web servers.
You are creating a disaster recovery plan for the AD CS infrastructure. You need to recommend which actions must be performed to restore certificate revocation checking if a certification authority (CA) is offline for an extended period of time.
Which three actions should you recommend? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
1: By using Certutil, republish the CRL
2: Copy the CRL to the Webserver farm
3: Restore a copy of the CA's public key and a copy of the CA's certificate

I doubt this,
What it should be:

1: By using certutil, resign the CRL, and then extend the validity period of the CRL
2: Copy the CRL to the Webserver farm
3: By using Certutil, republish the CRL
Ref:
http://blogs.technet.com/b/askds/archive/2011/05/25/certificate-authority-disaster-recovery-steps-when-smartcard-logon-is-required-but-no-valid-crl-can-be-published.aspx

Can anyone shine his/her light on this one? and let me know what the correct answer should be and why?

Hi guys!
Please go to this post:
http://www.examcollection.com/microsoft/Microsoft.BrainDump.70-414.v2013-03-05.by.Anonymous.95q.vce.file.html

and find Omar's VCE file
I just got 820 marks today with Omar's file ONLY

Hope it can help you all

I scored way above 700. You will pass.the dump is ok..not too wrong many answers..all drag and drops are mostly correct just change below


exam b

2 servers (q6)
service manager and VMM (Q5)

exam c (q2)

2 disks
3 disks
3 disks (If you get this wrong you should shoot yourself)

exam d

startup ram (q14) ITS IS STARTUP RAM..IF YOU CHOOSE MINIMUM YOU ARE DUMB.Its been said 100 times

3rd party trusted cert with server1.contoso.com and server autheitication cert issues by CA1 with name server1.contoso.com (question 18)

the reason is because each choice should allow external and internal access (COMPLETE SOLUTION) so external clients need to be able to find server internally by DNS.so it would not be server1

and microsoft is not gonna give you a select all apply with 1 choice out of 5

Failed today with 6** with this dump. There are too many wrong answers.

WTF guys

Failed on 6. with this dump %

A lot of discussions about the correct answers, somebody share the correct answers please, no new questions by the way.

Is it Start up RAM or minimum RAM ????
Server manager and VMM ( exam B )

Drag and drop about Certutil ? which order?

I cant rely on this dump, i was so close but this dump got many wrong answers.

i dont get it now anymore, is the exam changed or not??

Hi TimeZone, you are very lucky. No any questions. According some of pelope, they said the questions have changed 18 March afternoon.

Hi Ohio, you test today 19 Mar morning?

Hi
I passed today with 730 and the Mix Dump from all the Question where vaild.
No new Questions in Germany this morning. I had luck.
My Score:
Manage and Maintain a Server Infr. 73 %
Plan and Implement a Hight Avail. Enter. Infr. 85 %
Plan and Implement a Server Virt. Infr. 95 %
Design and Implement IAS 85 %

passed. No new ?'s

changes

exam b
2 servers
service manager and VMM

exam c
2 disks
3 disks
3 disks

exam d
startup ram

no new issues

@kyssa, what do you mean , you passed and didnt get the new questions. Or you got the new questions???

Hi amjuu from Saudi Arabia!
I learned only this dump, no change

Failed 640 score. These dumps are almost worthless now. I may have had 15-18 questions from the dumps. I used the 2nd MFB with all the listed corrections, chumley dumps. My company profile questions were the new contoso that @figarro had and I think the same company A - company B questions where company A is Fabrikam and B is Litware. There are new high availability questions, certificate questions and multi site file server questions. The Azure questions only concerned with connectivity and security, not actually Azure setup or functionality. Fabrikam questions are basically a rehash of topics covered in the dumps here. You just need to know the topics covered by these questions, not just the questions and answers. Without good knowledge of 2012 server and the technologies on the exam, my score would have been much lower.

I wish I would have checked here before going to take my test today. I failed 640 score. These dumps are worthless now. I may have had 15-18 questions from the dumps. I used the 2nd MFB with all the listed corrections, chumley dumps. My company profile questions were the new contoso that @figarro had and I think the same company A - company B questions where company A is Fabrikam and B is Litware. There are new high availability questions, certificate questions and multi site file server questions. The Azure questions for new Contoso were only about future plans and recommendations for connectivity and security, not so much about Azure functionality. The Fabrikam/Litware questions didn't involve any new concepts not covered by the dumps here, but they do require us to know the topics covered in these dumps, not just the questions in these dumps. I guess I'll wait for the pass4sure or testking to update again and then start over. If I only studied these dumps and not the actually technologies from sources like TechNet and others, my score would have been a lot lower.

i sent Dums to yours Email plz check

Chumleymcse's dump was the best dump ever until now. I used this dump to get pass the exam a few days ago with 760/1000. Then I recommended this dump to my friend who went took the exam today then failed badly 380/1000 or so. Meanwhile Microsoft has change questions again after 20 days it is very unusual that they do this often.
Well, not much you can do about it except for waiting for a new valid dump- with some positive feedbacks this time make sure you do the exam right away. You all know that the test pool gets bigger every time MS adds new questions, thus more questions to memorize, for now just wait for a new dump or help each other cracking on those new questions, just like MFB or Chumleymcse and other did before. Don't give up :)

MS changes questions in the exam again! They just did that 2 or 3 weeks ago - too often arrrrkkkkkk.

I failed today too with 420, as Quantu2by2 and Jaja pointed out, it looks like we have to work out on those new questions added by MS. They change new questions twice in 1 month, unbelieveable that is too quick. :(

Hey Figgaro, sorry to hear the news. Thanks quantum2by2 for the heads up on the topic changes - I'll go thru as much as I can tomorrow though think the new questions should be more for those sitting the Cloud exams. Doing the official Microsoft course aad have my exam on Wednesday and there's nothing/very little in the book/course on either dir synch or Azure.

Jaja you are correct..definitely new questions on test. I failed today for 2nd time 520. I scored 690 a monthago. After reading figarro post I'm assuming that MS has added a bunch more new questions to the test pool. I also had the new Contoso scenario, but I did have the Datum questions as per these dumps. I also had directory sync questions as well as new CA questions. These dumps are at best 45-50% accurate. Azure management portals, iaas, paas, and saas are a few new things we need to know for this test. I would have better details about the test, but I was shell shocked by all the new questions. It looks like Microshaft is trying to push their hosting/cloud solutions.

Figarro-- I think you might have been given a new set of questions. Sorry to hear that you failed badly today, anyone who plans to do the exam be warned that Microsoft from time to time replace new set of questions or add new questions to the pool. The longer you wait the more you have to memorize all the questions. Wait for more confirmation to find out whether this dump is still valid.

Figarro

Did they changed the questions again? Can more people verify this ?

I am about to take exam this week

******Failed today 395 using this dump and several others. The actual test looked nothing like these dumps. The two scenarios are completely different.Some concepts were the same. But only 4-5 questions were similar to these dumps.
On my test the Contoso scenario involved planned changes to migrate to Microsoft Windows Azure Infrastructure as a Service(dir sync, required certficates, printing, etc..) The other scenario concerned company A purchaseing company B and the required access between the domains and future plans of and company B ad as a child domain. There were also questions about Azure, ADFS, AD CS that are not on any of these dumps.

Thanks of God
i passed today with 100% valid Dums and scrore with 830 Marks .Any one needed i can sent Thanks

Thank you very much Chumleymcse, passed today 780 using your dump, I noticed the question B15 regarding DNS record, the answer choices had been changed, choice A sitll remain the same but the others changed to something else, other questions are the same, anyone who plan to take the exam by using this dump, it is a good chance that you will pass or else waiting for a better dump, I doubt it if someone gonna upload it soon, before then the number of questions could be larger.

Hi Kyssa from Kazakhstan,

Did you use same Answers or made some change from this dump.?

Passed today with score 760, there are serveral wrong answers in this dump but still good enought to pass the exam. Follow exactly what the dump says you should be okay. Good luck to you all, and once again Thank you chumleymcse for your effort in correcting / publishing this dump.

8++
made several changes, but the result is the same! lol

Passed today with 850 with this dump

Passed today with 760 with this dump. Only one new question in Contoso section. Good luck to all.

Same Dupms: chumleymcse.95q.vce

@ akila & MEE & Zozo which Dump you use ???

03/16 I passed with 850

Passes: 820. Confirmed. Some Answers are wrong. Butt enough to pass the exam

hello, anyone has the book Ref 70-414 Exam: Implementing an Advanced Server Infrastructure?, This Could help us all to build a best dump.

Passed today using MBF only dumps and got 700. Thanks GOD become MCSE.Guys be careful while giving the exam

passed with 860, some of the answers are still wrong on this dump i feel, can't be bothered saying the wrong ones i think, do your own research. but this will get you a pass for sure.

Passed today with 760, most of my answers same as this dump, glad I'm done. Good luck to you guys

I passed with 880 today.

I passed with 730. Some modifications needed

I just passed with 760. Not the best score but its a PASS! Study this dump exactly and you'll get in the 750 range. (For Exam B/Question 5 I answered SM and VMM per Chumley's suggestions)

@ arun which dump did you used Thanks.

I just now took this exam and pass today Scored 760.
Thanks to chumleymcse.

Hi guys, Thanks for all your replies and effords regarding the 2-way and 3-way mirror question. Sorry to see people fail, good to see people succeed. How to make a dump for this? (I'm not familiar with that). what's the working method/procedure (if any) for this ?

I passed today with a 760 in US

I didn't get the 2/3/3 disk selection but I got all the other select and place ones

I got the startup/min memory Q I answered Startup

No new Questions that I saw, all answers where nearly the same from this VCE

Wish I could help more, good luck to all that follow

THE QUESTION 1 GOT
xam A
QIO
Q13
Q15

EXAM B
Q1
Q5
Q7
Q9
Q10
Q15 option d,is not part of the answers
exam c
Q8
Q13

EXAM D
ALL EXAM D.
Q12 option c is not part of the answers INSTEAD REINSTALL ADCS AS AN ENTERPRISE CA

CONTOSO
Q6
Q8
Q10
Q12
THE OTHER TWO IS NEW QUESTION

DATUM
Q4
Q5
Q6
Q7
Q8
Q12

i pass with 730. i modified some answers

@Long
I believe what prevents the import to VMM is the size of the disks, nothing bigger than 2 TB, its right in the list from the link you provided

Must have at least 512 MB of RAM.
• Cannot have any volumes larger than 2040 GB.
• Must have an Advanced Configuration and Power Interface (ACPI) BIOS. Vista WinPE will not install on a non-ACPI BIOS.
Must be accessible by VMM and by the virtual machine host.
• Cannot be in a perimeter network.

and finally,



• VMM does not support converting a physical computer running Windows Server 2003 with Service Pack 1 (SP1) to a virtual machine that is managed by Hyper-V. Hyper-V does not support Integration Components on computers running Windows Server 2003 with SP1. As a result, there is no mouse control when you use Remote Desktop Protocol (RDP) to connect to the virtual machine. To avoid this issue, update the operating system to Windows Server 2003 with Service Pack 2 (SP2) before you convert the physical computer.

So the correct answer is Server 1, 4 and 5

1/ Question C-12, I think the answers should be: A - C - D. P2V by SCVMM 2012 SP1 not should support Windows Server 2003 R2. Here is my reference: http://technet.microsoft.com/en-us/library/hh427293.aspx.

2/ Question D-14: the answer is correct: D (Minimum Memory). Reference: http://technet.microsoft.com/en-us/library/hh831766.aspx

Minimum memory configuration with reliable restart operation
As in the previous version of Dynamic Memory, you can configure a minimum memory amount for virtual machines in Windows Server 2012, and Hyper-V continues to ensure that this amount is always assigned to running virtual machines.
To provide a reliable restart experience for the virtual machines configured with less minimum memory than startup memory, Hyper-V in Windows Server 2012 uses Smart Paging. This memory management method uses disk resources as additional, temporary memory when more memory is required to restart a virtual machine. This approach has advantages and drawbacks. It provides a reliable way to keep the virtual machines running when there is no available physical memory. However, it can degrade virtual machine performance because disk access speeds are much slower than memory access speeds.

Relate to C-2 question, in my view, the choice should be 2-3-3. It's asked for minimum of physical disks. Here is the reference: http://www.ms4u.info/2012/10/storage-virtualization-in-windows.html

b) Mirror spaces - to improve performance & increase resilient. When configure as mirror, they are 2 types

i) Two way mirror - can tolerate 1 disk failure. Two-way mirror spaces must use three or more physical disks. Minimum number of disk is 2.

ii) Three way mirror - can tolerate 2 disk failure. Three-way mirror space must use five or more physical disks. Minimum number of disk is 3.

c) Parity - designed for capacity efficient & improve resilient. Minimum number of disk is 3.

Exam C, Question 2:
I was trying to understand the correct answer here, as I felt it should be 2,3,5. This link seems to confirm my thoughts:
http://www.windowsitpro.com/article/what-would-microsoft-support-do/navigating-storage-spaces-pools-144558
Relevant Text:
Layout. The storage layout is simply the type of RAID you want to use. You can choose Simple (RAID 0 or stripe set without parity), Mirror (RAID 1), or Parity (RAID 5 or stripe set with parity). You can create a simple set with one or more physical disks from the pool. Parity sets require three or more physical disks to be available in the pool. Finally, mirror sets can be created using either two or more physical disks for a two-way mirror, or five or more physical disks for a three-way mirror.

Just read this article
Deploy Storage Spaces on a Stand-Alone Server
http://technet.microsoft.com/en-us/library/jj822938.aspx
* Requires at least two physical disks to protect from single disk failure.
* Requires at least five physical disks to protect from two simultaneous disk failures
Any questions?
As I said before. I tried to create disk on space with only three/four disks and wizard even do not ask me two- or three-way. Wizard only create two-way. After I added fifth disk to pool Wizard give me a choice two- or three-way mirrored.

@Bob You are right now I have read it through. Clustered doesn't support parity so you cannot answer the question if this is the case as there is no answer choice for that option. Def 2,3,3

To all looking at C2 READ this link

http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#Example_2_A_Three-Column_Parity_Space

it clearly says, 2 disks (two way), 3 disks (three way) and 3 disks (parity). this is for a NON clustered envrironment. Stop reposting the same stuff, when the links youre posting are for CLUSTERS.

To All,
Did the exam, no new questions
In the latests dumbs not all anwsers are right, so you have to research, like i did and make the best of it
My study, for this exam : CBT Nuggets, some dumbs study and a lot of technet reading
Finally i Passed the exam with 730 points and I happy

Fail, invalid !!

fail 665 one new q

I tried on standalone server. I made some disk on SAN and present them to standalone server. And I saw three-way mirrored type of disk only after I added fifth disk.

@ "Bluedude" and "doesn't matter",
Thanks for your replies!
The Link: http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx
Suggests:
Two-way mirror spaces must use three or more physical disks
Three-way mirror spaces must use five or more physical disks

Your comment: "When creating the storage pool you do not get the option to select a three-way mirror unless you select 5 physical disks!"

Did you test this on a failover clustered environment or standalone environment? I mean: Is the result in both environments the same?

SORRY FOR MISTAKE REG. Two-way mirror in previous post! :-(

Regarding exam C question 2 / C2

Two-way mirror: 3 physical disks are required.
Parity: 3 physical disks are required.
Three-way mirror: 5 physical disks are required.

Link: http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx

Two-way mirror spaces must use three or more physical disks
Three-way mirror spaces must use five or more physical disks

When creating the storage pool you do not get the option to select a three-way mirror unless you select 5 physical disks!

I've just tried to create three-way mirrored disk.
This option is accessible only in storage space with five disk. If you have space with only 3 or 4 disks Wizard even does not ask you witch type of mirrored you want to create. Wizard can create only two-way mirrored.

bluedude from Germany

the link you posted, disagrees... re. exam C2


esiliency type

Minimum number of columns

Column-to-disk correlation

Minimum number of disks

Simple (no resiliency)

1 1:1 1

Two-way mirror

1 1:2 2

Three-way mirror

1 1:3 3

Parity

3 1:1 3

Regarding exam C question 2 / C2

Two-way mirror: 2 physical disks are required.
Parity: 3 physical disks are required.
Three-way mirror: 5 physical disks are required.

Link: http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx

Two-way mirror spaces must use three or more physical disks
Three-way mirror spaces must use five or more physical disks

When creating the storage pool you do not get the option to select a three-way mirror unless you select 5 physical disks!

Regarding bob / B15 the correct answer would be D - Delete one of the host (A) records for intranet. Modify the remaining (A) record for intranet.

Users are accessing the intranet using http://intranet.contoso.com why should we delete records for Web1 and Web2 and add a new 3rd A record for intranet.contoso.com. This makes no sense.

@Prepdaddy I think I have the answer. The clue is in the question. Parity is NOT support in NLB/Cluster so the question should be asking about stand alone. Therefore 2,3,3

What types of storage spaces can I use with a failover cluster?


Storage Spaces supports creating a clustered storage pool when using mirror spaces and simple spaces. To cluster Storage Spaces, your environment must meet the following requirements:


•All storage spaces in the storage pool must use fixed provisioning.
•Two-way mirror spaces must use three or more physical disks
•Three-way mirror spaces must use five or more physical disks

•Parity spaces are not supported

•All physical disks in a clustered pool must be connected via SAS
•All physical disks must support persistent reservations and pass the failover cluster validation tests

Exam C Question 2
The source of where the correct answer should come from points to: http://www.ms4u.info/2012/10/storage-virtualization-in-windows.html

The source clearly states information that the right answer to this question should be:
VD1= 2 DISKS
VD2= 3 DISKS
VD3= 3 DISKS

Key is to: "to identify the minimum number of physical disks required for each virtual disk".
I have found information on a microsoft site (http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx?PageIndex=2) stating:
"Two-way mirror spaces must use three or more physical disks"
"Three-way mirror spaces must use five or more physical disks"
Yet there's nothing mentioned about a failover cluster.
So less anyone can proof the above mentioned answer is wrong, i'll stick to that.
P.S. Thanks y'all !

Are u guys looking at a different Hyper-V version 2012 to me. I see startup, minimum and maximum RAM???

This dump is equal to mbf, only few correction, first go to the exam i have read a corretion of dump.

@ Italian-MCSE

This dump is posted today - and you pass exam today - could you explain that weird situation? :)))

@Italian-mcse

You realise there is NO 'minimum' ram setting fro a VM in hyperV 2012 ? its 'ram' or 'startup ram' or 'maxmimum ram'

@ Italian-MCSE
What dump did you use?

today i pass with the correction in this dump. 850 with only two new question.
Manage a server infrastructure 80%
Plan and implement a highly available ent. Infrast. 100%
Implement a vurtualization infrastr 70%
Identity and access solutiin 100%.
Exam d q14 for me is a minimum ram.
Thanks to all!

Hi all I just uploaded the D exam with what i believe are the correct answers. It should appear tomorrow.

Exam D - Q14 i think should be Startup Ram, not minimum ram, I dont see any value for 'minimum' ram in hyperV 2012, only static ram, minimum ram, maximum ram. It logically should be C - startup RAM.

Exam B Q15 Not so sure about the answer in this dump ie delete host records and Web1 and Web2 and create a new A record.

Round Robin would normally be configured with 2 A records i.e

intranet -> IPWEb1
intranet ->IPWEB2

Surely the best way is to remove 1, reconfigure the other. The answer marked as correct here would remove BOTH DNS entries for Web1 and Web2 which although would also work, would remove DNS for 2 servers, going against best practice.