Pass Your Microsoft 70-642 Exam Easy!

this dump is still 95% valid in pakistan.I passed on 13 mar 2013 with 815 marks.Thanx GOD

passed with 700. some new questions. same pattern of questions repeated (dns, dhcp, ldap port no and few other) with 10 choices.

Hello i did the exam 28/2/2012
i passed with 746
i could do better but i didnt remember all thre question with 15 answers
there were question from the newest dump
the was totaly one new question
Thank you

valid for indonesia, pass over 800, 5 new question though . i just can't remember some answer, can't get 900

Passed on Friday with 907. This Dump is valid in Trinidad. I used this dump only. 6 new questions.

Valid. Passed Yesterday. Some new questiens added like ldap and pop3.

Thank you..

failed 681 but valid though 2 or 3 new questions no drag n drop

I study this dump and I am ready for the exam. But today I decided to check Microsoft Pass4Sure 70-642 v2012-11-22 by Bruce 349q.vce. I noticed too many of the answers are different in these two dumps. Which one should I study?

This is still valid! Took my exam today and I passed! one more exam to go.. Thank you guys for the contribution and good luck to all!

Still valid in egypt
passed yesterday thanks to Allah with score of 850
only two new questions port of LDAP and POP3

This exam is valid 99% ,Passed Today (Jan 27 2013) new questions about the port of POP3s (TCP 995) and LDAPs port (TCP 636), I got 975

In Thailand dump is valid 99% i got 3 new question

This exam is valid , I got 825(17/1/2013), New (POP3) port
Thanks all

this exam is valid , I didn't pass coz i didn't study so well

exam is 100% valid , passed today
new questions(1) : The DHCP service encountered the following error while cleaning up the database : An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
**choice : like exam Q (quest no 3)
new questions(2) :
http://i50.tinypic.com/168a1w5.jpg
exhibit was like this pic put with error : can access application and security but can't access system error code (5)
**choice : i don't remeber , but i think there were choices about user permissions
new question (3) : secured ports of POP3 , and LDAP
thx all :)

for question (q-3) (n-15) which is the correct answer ?
Modify the start address. // or // Increase the database cleanup interval.

Did the exam today. Passed with 900. 90% of this test exam is still valid. Focus on encrypted (secure ports) sPOP 995 sIMAP 993. sLDAP 636. DNS and DHCP ports where also in my exam. Thanks for all that contributed...

Just took this paper exam yesterday and Pass with 875 marks. Studied these pools and it was almost valid, barely few new questions about port numbers like ldap and few more but this pools have few wrong answers thats why my passing marks droped. And no drag and drop and subnetting questions came. Thanks for exam collection responsibles to make exam so easy and in free to read and pass :D Now prepare for another paper 646.

Took Test in USA, 90% valid. Thanks to all who contributed.

Dump still Valid, thanks all

@somewierdguy: i'm taking the test next week and am concerned about this practice test's accuracy. good luck tomorrow - please let us know!

+Valid in the Philippines. 900/1000. focus on the ports :) Thanks cramjunckie ;)+

Valid in the Netherlands! (with questions about the ports)

Passed before 3 days with 850 score valid focus on ports questions the dumb is valid good luck ^_^

Not valid for me today. USA. Good luck : (

this dump is valid . I passed Today with 875 .. 3 new questions

this dums is 100% valid today i am pass 800/1000 please, any dout contact me +919723454035

Thanks every body today i passed the exam with 875 marks, thanks every body again

valid!
Passed today with 900 score

Passed today with 850 , same questions!!!
wish all the best for all!!!
Thanks!!!

Just passed the exam All the questions are from the dump except LDAP port ( answer is TCP 636 )i got 950 /1000

Passed yesterday getting 900/1000 all questions this dump & one new question 100% valid this dump Thanks bruce

this dump is valid

Passed with 920 .. works perfectly

Works well in Norway, all questions in my test were in this exam .. used this an Bruce, they are very similar

elhamd lelah i passed today it is valid in Egypt , some new questions about port number POP3(SSL) - 995 (TCP)
LDAP(SSL) - 636 (TCP)

Dear All

Passed today, this dump is valid in egypt 100% 3 new qustions only

Thank you so much for this , i hop to pass

Passed today with 925/1000. passing was 700. 100% valid. No new question. no droplets.

I pass yesterday!!
100% valid dumb

Passed : 800

Netherlands: Passed today with 950. All questions valid, only 2 new about the POP and LDAP ports

I've passed yesterday scored 850, I only prepared with cramjunkie. 90% valid, few Qs were new whereas few answers were wrong in dumps well! in a nutshell enough to get certified.

I pass to day with 700 score in Vietnam. So many new questions and change the order of the answers. I used this dump and the 442q.

Dump 100% Valid , 3 new question passed today 925/1000

Appearing in this exam with in next 3 hrs.

it is thanks to my dear ALLAH almighty that tody i passed the exame 70-642 with 850 . from pakistan

Praise be to God I got through with 925. I used Anon 442 and this dump, cramjunkie 379. But I mainly focused on Anon. I know of others who got more than 850 just by using this dump and Anon. So the dumps are valid with a few wrong answers, more wrong in cramjunkie than Anon in my opinion but you study for yourself and select the right answer.

Exam still valid, passed today with a score of 825. Also these in exam: POP3(SSL) and LDAP(SSL) port nos.
POP3(SSL) - 995 (TCP)
LDAP(SSL) - 636 (TCP)
Thanks

some answers are wrong but passed today !!
with 775.
10 new questions in exam.

from canada passed today wt 900 with the help of peps from kinshasa DRC
45 qst good job peps from kinshasa DRC

The Dump is valid 100% in Egypt (Yat Training Center-Dokki)
Passed today 925
Thank you all and keep the good job up.
Studied Last one for Microsoft.Pass4Sure.70-642.v2012-11-22.by.Bruce.349q
Good Luck

Passed yesterday score 950.
Dump 100% valid, thanks a lot Cramjunkie!!!!!!

I passed Today with 750/1000, I could have done better, if iconcentrated on this dump, I recommand you this one and the Annon 442, they are the best, I counted 46 questions out of 50 from these dumps, about 3 To 4 new questions, POP3 port 995, and LDAP port 636 , After the exam I checked these 2 dumps; I realized that I missed 5 Questions, that were in the dumps, just study your books well, and anderstand the reason for each answer in the dumps, if any one want the 45 questions I recognized, e-mail me at pepitho.cy@gmail.com

valid 100% pass today with 900
this is new Q
make sure on POP3(SSL) and LDAP(SSL) port nos.
POP3(SSL) - 995 (TCP)
LDAP(SSL) - 636 (TCP)
ELHAMD LE ALLAH

Passed today with 875 marks..5 to 6 new questions ..90% valid dumps

This dump is valid but there are about 5 new question, i passed today with 850 marks. thanks

This dump is valid but there are about 5 new question, i passed today

@mohamed or @ Ayas

do you think this dump has lots of wrong answers? for what I read below comments some people think this one has lots of wrong answers, how about the one from Anon 442 Q is it better? http://www.mediafire.com/?5ol5df7vd7c383q Appreciate your honest answer. thanks

@ cris this is the link http://www.mediafire.com/?5ol5df7vd7c383q
When r u planning to write the exam?

Hi, i can't find the anon dump 442Q,can someone please give the link?? please please please :((

passed wirh this exam , the score is 850 100 % vaild in bahrain

this is 90% valid dumps.passed yesterday with 825 marks

It is thank to God for million times that today I passed the Infrastructure paper and got 850 marks, This dumps is valid in Pakistan Only five new questions.

@Yury Correct, there are 50 questions in the exam.

@Tools 10x for the link. There are 50 Qs you have to answer. I believe same thing with 70-640?

@Yury No, what I am asking is how many questions I have to answer on the exam?

For 70-640 I used this dump: http://www.examcollection.com/microsoft/Microsoft.Pass4Sures.70-640.v2012-08-19.by.FixedAnswers.468q.vce.file.html

@Tools

What dump did you use to prepare for 70-640?

After you clean out the duplicates, there are about 360 Qs in the 70-642 dump, even including the new Qs.

Sorry to mislead - the correct answer is
http://technet.microsoft.com/en-us/library/cc738592(v=ws.10).aspx#BKMK_25

Passed today with 975. Used first this dump (not 400q where I wrongly posted), then went over to Anon's one (more full, less wrong answers), and also used Bruce's original dump (just for the sake of the new questions).
There are a few new and some rephrased questions. What I still remember (in short):

1. What command clears name cache from interface?

a) ipconfig
b) netsh
c) route
d) netbtugc

The right answer is http://technet.microsoft.com/en-us/library/bb490991.aspx

This Dump is valid score 925 , 4 new questions. Learn this dump + Anon dump + Pass4Sure dump

Alhamdulilah ( I passed with 800 point, use only 442q dump. Goodluck to you )

This dump still valid. I passed today, only 3 new questions.

Valid in OZI. Good luck to all and Merry Christmas!!!

passed with 875 using this dump and anon442Q

Valid in Russia. Passed 29.12.12 850. Some new questions.
Lightweight Directory Access Protocol port 389 TCP, 389 UDP

i passed the exam with 750 on sunday.this dums is valid but most of answer is wrong plz check it.when i gave exam i am hopeful my number will above 900 because i am 100% sure that 45 question of my exam is correct according to the dums but i get only 750 marks. i don't know what happened so i suggest all of you take 100% preparation on this dums because a big game in this dums. 2 question out of the dums. thank you

Passed with 750. 5 new questions Vailed 90% in Pakistan Thanks

Passed with 875. Two new questions regarding firewall ports for LDAP and POP3. Exam taken on 27/11/2012. Thanks cramjunkie!

passed with 900 today. 3 new questions. 2 were the same as Moustafa Adel from Egypt and Srini from India. POP3(SSL) & LDAP(SSL)

The dump is perfect and valid, I passed today and got 950, just two new questions about POP3(SSL) & LDAP(SSL)

Taken exam today, Passed with 825, in India. Thanks every one.
This dumps is 100% valid. make sure on POP3(SSL) and LDAP(SSL) port nos.
POP3(SSL) - 995 (TCP)
LDAP(SSL) - 636 (TCP)

VALID here in Philippines. Just passed today. Thanks a lot for all the contributors and good luck for those who will take the exam! :-)

hi all sudents

thanks all ScorpionKingJ75 Cramjunkie.

Passed with 900/1000 on 11/28 , only 3 new questions regarding encrypted ports for POP3, SMTP. Thank you Cramjunkie.

@Jonn from Israel, are the new question were complicated or like the q from this dump?

Here you are: dump 442q at this link : http://www.mediafire.com/?5ol5df7vd7c383q

Passed with 700/1000!!! this dump is not valid ,I had 10 new quastion!!

Hello,
Where I can find Anonymous 442q dump?
A lot of users comment that this is the right dump, but I can't find it.

Pass today with 725 the annon 442q is the best one

Passed 850, this dump is perfect however the annon 442q is the best.

Saludos desde España!

@Israr , Bro
as i said in my post about cramjunkie 379q it has a few wrong answers.
u can trust on Bruce 349q. But after full preparation from any one of these three dumps u must see other 2 dumps too.
just see for new Questions.

So Jahanzeb i will go for which dump i will go for this exam on monday

Today i have given the exam and get 850 points.I used cramjunkie 379q as a base. and i used Anonymous 442q {link is here http://www.mediafire.com/?5ol5df7vd7c383q} which has 10 new questions and Bruce 349q which has about 15 new questions.
During exam i countered 2 questions from Anonymous 442q and 3 from Bruce 349q means from new questions. All other questions are 100% came from cramjunkie 379q.
But i think those have Wrong answers in dump that is y i got less Marks.
Any way thank to all.

mitko please use the Anon 442 q since there is lot of incorrect answer in the cramjunk 379

B is definitely the correct answer

yes The correct answer is B because when we convert it to active directory the traffic will be automatically encrypted..go for it.

I think that the answer for the following question is wrong.
Answer B should be the right.
Please comment.

Exam E,Question 10
Your network contains an Active Directory domain named contoso.com. The domain contains two sites named
Site1 and Site2. The servers for the sites are configured as shown in the following table.
Server1 hosts a standard primary zone for contoso.com. Server2 hosts a secondary zone for contoso.com. You
need to ensure that all DNS replication traffic between Server1 and Server2 is encrypted.
What should you do?
A. On Server1, configure DNSSEC for the contoso.com zone.
B. On Server1, convert the contoso.com zone to an Active Directory-integrated zone.
C. On each server, create connection security rules.
D. On each server, enable Encrypting File System (EFS) encryption for the contoso.com.dns file.

I will go for this exam is 442q by Anon is enough for this please confirm or should i select the cramjunkie.379q

thank you Agent Smith good lulck

thanks Aptechcnc

Passed with over 900, this dump valid but some wrong answers, used cramjunkie.379q + Bruce.349q + Anon 442.q - know which answers are right out of each one and you will pass, study + dumps is best

Here you are: dump 442q at this link : http://www.mediafire.com/?5ol5df7vd7c383q

hi Aptechcnc
bro give me link this dum 442

No Problem, Sir Joe. I had passed with 892 point, use only 442q dump. Goodluck to you.

valid!
Passed today with 871 score

Validd!!
Passed wirh 914.
No new Qs.

Thanx so much Aptechcnc, I have just download dump 442q at this link you provided : http://www.mediafire.com/?5ol5df7vd7c383q

I am am preparing for this exam and want to pass it. (Y)

passed with 780.thanks to cramjunkie and sugar. 2 new questions, I think there are some wrong answers. Any ways best of luck for all those who will give the exam in future

Cleared with 885 Valid is Pakistan.
Thanks all

I am going to give exam today- prepare cramjunk &anon will give feedback.
JazakAllah

Sorry, pls download dump 442q at this link : http://www.mediafire.com/?5ol5df7vd7c383q

@mohammed abdelrazek .. can you send me a copy of 442q by Anon VCE file

thanks

Hi All, I am preparing to take this exam but most colleges are talkiingabout the Dump 442q by Anon VCE file. Where can I have this exam dump 442q by Anon VCE file.

My email is jkamara77@gmail.com



Thanx.

Thanks for the help. Error identified Exam F , Q18. Correct anser is C. Changes should be made on SERVER1DFS1. If SERVER2 is offline how will changes made effect users? Am writing tommorrow. Will give feedback..

@mohammed abdelrazek, please also send me a copy of 442q by Anon VCE file.

Email Address: hibulin@gmail.com

Thanks in advance.

i just passed by score of 762 . this dumb is valid but the dumb of 442q by.Anon is the best . but i don't see it now in the site .. any way i have it if anybody want it i can send it to him .
one thing more .. most question came from last dumb questions

Hi,
In exam D Q12. the answer is C but I think it could be A
This is because - If multiple interfaces of the same speed have the same lowest interface metric, then, based upon the binding order, the default gateway of the first network adapter is used. The default gateway for the second network adapter is used when the first is unavailable.
Please Can someone help with this.
Thanks,

This dump is valid in United States. Thank you so much for this dump and everyone's comments. Need to start studying for 70-646.

hi guys all

This Dump is 100% valid
i went to prepring this exam which one 100% Valid

This Dump is 100% valid,. Can anybody help me?

I cleared the exam today. This dump is 100% valid and thank you. If posible pls suggest the best dump for 70-643

I have not spent with these questions. I took the exam today and hit 640 = /. I will try again next week

valid 100% , pass with 914

@Adnan: Congarts man, please can you confirm me dat the ansewrs of the dumps are sure or you think there is some doubt regarding the answers.thanx

I passed my exam yesterday with 892 marks.100% Valid in Pakistan

Question:

Your network contains an Active Directory domain named contoso.com. The domain contains three VPN
servers named VPN1, VPN2, and VPN3 that run Windows Server 2008 R2.
You need to configure all of the VPN servers to use the same network policies.
What should you configure on the VPN servers?
A. remediation server groups
B. the RADIUS Accounting accounting provider
C. connection request policies
D. the RADIUS Authentication authentication provider
I think the right answer is D.What do you think?

Passed today with 892 :)
Most of questions from this dump. But check dump by Bruce, last exams. There new questions, which I got in the exam (about 5-7 quesiotns from Bruce dump).

Passed today
892
be carefull there is modifyed Q
Thank you Cram, Thank you Anonnymos

@ Rade: http://www.dailymotion.com/video/xuvvbp_localgpo_tech

Local Group Policy

Local Computer PolicyComputer ConfigurationAdmin TemplateWin ComponentsEvent Log ServiceSystem: Log Access:


This policy setting specifies to use the security descriptor for the log using the Security Descriptor Definition Language (SDDL) string.

If this policy setting is enabled, only those users matching the security descriptor can access the log.

If this policy setting is disabled or not configured, then only system software and administrators can write/clear this log, and any authenticated user can read events from it.

And one more:

You need to ensure that only the members of the Power Users group and the members of the Administrators
group can view the events in the System log.
Which tools should you use?
A. Limit-EventLog
B. Local Group Policy Editor
C. Secedit
D. Local Users and Groups

What you think about this question?

Question:

Your network contains an Active Directory domain named contoso.com. The domain contains two DNS servers
named DC1 and Server1. DC1 is a domain controller. Server1 is member server.
On Server1, you create a primary zone named fabrikam.com.
You need to create a copy of the fabrikam.com zone on DC1.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. Create a new secondary zone on DC1.
B. Run the New Delegation Wizard on DC1.
C. Create a new Active Directory-integrated stub zone on DC1.
D. Run the New Delegation Wizard on Server1.
E. Modify the Name Servers list for the fabrikam.com zone.
F. Modify the start of authority (SOA) record of the fabrikam.com zone.
I think right answer is AE. What do you think?

@ Rade:
Ms Press 70-642
----Alias Reso urce Records
Alias (CNAME) resource records are sometimes called canonical names. These records allow you
to use more than one name to point to a single host. For example, the well-known server names
(ftp, www) are typically registered using CNAME resource records. These records map the host
name specific to a given service (such as ftp.lucernepublishing.com) to the actual A resource
record of the computer hosting the service (such as server-boston.lucernepublishing.com).
CNAME resource records are also recommended for use in the following scenarios:
■ When a host specified in an A resource record in the same zone needs to be renamed
■ When a generic name for a well-known server such as www needs to resolve to a
group of individual computers (each with individual A resource records) that provide
the same service (for example, a group of redundant web servers)----p192

GlobalNames
-----Windows Server 2008 and Windows Server 2008 R2 include a new feature that enables all DNS
clients in an Active Directory forest to use single-label name tags such as "Mail" to connect to
specific server resources located anywhere in the forest. This feature can be useful when the
default DNS suffix search list for DNS clients would not enable users to connect quickly (or
connect at all) to a resource by using a single-label name.---p199

For me I think :"GlobalNames"
and I dont know

@Proz12, are there new questions?

Passed yesterday 980 all questions are still valid!

Passed today with 871, 3 or 4 new questions. Kazakhstan. Thanks all )

@ Dqngerz

I agree with you! What you think about this question?
Your network contains an Active Directory forest. The forest contains three domain trees. Each domain tree
contains multiple domains.
You have an Active Directory-integrated DNS zone.
You install a Web server named Web1. All of the users in the company will use Web1. You need to ensure that
the users can access Web1 by using the URL http://web1. You want to achieve this goal by using the minimum
amount of administrative effort.
What should you do?
A. Configure a GlobalNames zone and add a Host (A) resource record for Web1.
B. Create an Alias (CNAME) resource record for Web1 in the forest root domain zone.
C. Create a reverse lookup zone and add an Alias (CNAME) resource record for Web1.
D. Create a Host Information (HINFO) resource record for Web1 in the forest root domain zone.
I think the right answer is B.I'm not sure.What you think?

Link is : http://technet.microsoft.com/en-us/library/cc726940%28v=ws.10%29.aspx

Reply to Rade:
http://technet.icrosoft.com/en-us/library/cc726940%28v=ws.10%29.aspx

the first solution is to extend the scope, this can be done by modifying the start address, if your start address is for example 192.168.1.10 you can change it to 192.168.1.1
2nd is to reduce the lease duration: no choice proposed
3rd is to Decrease the db cleanup interval, but here is: Increase

so the best choice is Modifying the Start address, I think

Exam N, Q15:
Your network contains a server named DC1 that has the DHCP Server server role installed.
DC1 has a DHCP scope for the 10.10.10.0/24 network ID.
You discover the following warning message in the Event Iog on DC1: "Scope, Scope1, is 98 percent full with
only two IP addresses remaining."
You need to ensure that DC1 has enough IP addresses to assign to clients. The solution must not cause any IP
conflicts.
What should you do?
A. Restore the database from a backup.
B. Configure name protection.
C. Configure DHCP link layer-based filtering.
D. Increase the database cleanup Interval.
E. Configure a DHCP Relay Agent.
F. Compact the database.
G. Modify the start address.
H. Reconcile the scope.

In this dump correct answer is D.What you think?

@Amir Thank you! You're right! What you think about all the other questions that i posted?
@Dqngerz Thank you!

Reply to Amir: Right
I tested it on Virtual Lab is true:
http://www.dailymotion.com/Dqngerz#video=xuuroj
Thank you Amir
this is dailymotion I dont know if it will be deleted

Reply to Amir: Right
I tested it on Virtual Lab is true:
http://www.4shared.com/video/GeCDDBio/MicrosoftBrainDump70-642v2012-.html
Thank you Amir
"I dont know why when I put youtube link my comment is deleted???"

@Rade ,@Dqngerz
I think answer D is completely right , because as you may know you may have 1 DNS server (it has only one NIC ) and your network might have multiple subnets (subnet are connected to each other by Routers ) but that DNS server will do its job for all subnets in interface tab you can select the specified interface only that consist of all subnets in your network but in windows firewall in scope tab you can mention Local subnet which the question wants.

Reply to : Rade from Serbia - Nov 04 2012, 8:12 PM
http://books.google.tn/books?id=T_8v6LGAjxMC&pg=PA116&lpg=PA116&dq=server+2008+encrypt+dns+replication&source=bl&ots=tKTAkYygKN&sig=CnvwtvMGoV3OCzhb5vfrdXZssvU&hl=en&sa=X&ei=ldOWUN-xJ9GS0QWejoCICA&redir_esc=y#v=onepage&q=server%202008%20encrypt%20dns%20replication&f=false

MCTS Self-Paced Training Kit (Exam 70-642) p
DNSSEC was created to stop the threat of forged DNS data. DNSSEC is an optional DNS
server feature that provides digital signatures for its records and validates the signatures
received from other DNSSEC-enabled servers. In Windows networks, DNSSEC is used as a
server-to-server protocol that validates responses on behalf of Windows 7 clients.

I dont think is true

but Active directory integrated: the is stored In Ad and I think the replication is Ecrypted What do think??

Right, from MCTS Self-Paced Training Kit (Exam 70-642) p143
Interfaces Tab
The Interfaces tab allows you to specify which of the local computer's IP addresses the
DNS server should listen to for DNS requests. For example, if your server is multihomed
(has more than one network adapter) and uses specific addresses for the local network
and others for the Internet connection, you can prevent the DNS server from servicing
DNS queries from the public interface. To perform this task, specify that the DNS server
listens only on the computer's internal IP addresses, as shown in Figure 2-20.
By default, the setting on this tab specifies that the DNS server listens on all IP addresses
associated with the local computer.
In Windows Firewall there is just an Inbound rule, which you can configure the scope
Thank you Again Rade

Exam E,Question 10
Your network contains an Active Directory domain named contoso.com. The domain contains two sites named
Site1 and Site2. The servers for the sites are configured as shown in the following table.
Server1 hosts a standard primary zone for contoso.com. Server2 hosts a secondary zone for contoso.com. You
need to ensure that all DNS replication traffic between Server1 and Server2 is encrypted.
What should you do?
A. On Server1, configure DNSSEC for the contoso.com zone.
B. On Server1, convert the contoso.com zone to an Active Directory-integrated zone.
C. On each server, create connection security rules.
D. On each server, enable Encrypting File System (EFS) encryption for the contoso.com.dns file.
In this dump correct answer is C.I think the right answer is A.
What do you think?

Question:

Your network contains a DNS server named DNS1 that runs Windows Server 2008 R2. You need to ensure
that DNS1 only responds to DNS queries from computers that are located in the same subnet.
What should you configure?
A. Interfaces from DNS Manager
B. Security from DNS Manager
C. Trust Anchors
D. Windows Firewall

In this dump correct answer is D.I think the right answer is A.What do you think?

Reply to Rade: you are right
from MCTS Self-Paced Training Kit (Exam 70-642)
p434:
By default, Windows Firewall allows all outbound traffic. Allowing outbound traffic is much
less risky than allowing inbound traffic

Question is:

You have an application server that runs Window Server 2008 R2. You need to configure Windows Firewall to allow Communications on the server as shown in the following table:
Name Port Direction
App1.exe 3402 Outbound
App1.exe 3433 Inbound
App2.exe 3400 OutBound
App2.exe 3401 Outbound
What is the minimum number of firewall rules you should create?"
Given answer=2

Doesn't Windows firewall allow outbound traffic by default?
So why isnt the answer=1 rule? (the inbound program rule on port 3433 for App1). Correct answer is?

Only Read up to Question #223 and still managed mid 800s to pass.
Some questions I had to use my real knowledge to complete. At least half my questions were not in the first 200+ from the dump - they may well be in there but. I think this is good practice and seems to be pretty accurate so it will halp anyway. Thanks Junkie.

passed today with. 914. about 5-10 new questions

I studied only this dump and passed with a 764, there seemed to be 12-20 new questions on the test I did not see in this dump. Thanks cramjunkie for putting this together.

Passed yesterday with 785p., exam still valid. there was 10-12 new q.
study from this dump and Anon442q.
thanks for all and goodluck to all

Passed yesterday, exam still valid but there was 10 new qes's.
study well

thanks god. 764 . pased yesterday 30th. only 1 new questions. but i think some of anzers are incorrect. be care full.

Passed with this dump .Thanks

I took this test this morning. I didn't pass.wasn't quite prepared. However out of 50 questions, only about 20 were from this brain dump. However, It is still valid practice.

100% vaild dump

@proz12 - nah, the passing score is 700

Hi Guys dumps still valid in SA I just passed this morning 721 (lack of preparation) only 2 questions which was not in the dump. One . which firewall port to open for pop3 e-mail . cant recall the other. You should be fine with this dump. Thanks Cramjunkie and all involved!

@The-Dude

You have to buy the Version V.3. So with your donation exam collection can continue their great job witch is let us post our dump here to help each other.

isnt a 600 a passing score?

Failed this exam today 670 due to lack of preperation. However dump is 95%+ vaild. Only had 1 question I didn't recognise.

Uhh. the link to the software is on the right-hand side of this webpage.

100% Valid in Brazil!

Passed today. Got 785. This dump is 95% valid in SA. Thank you for posting Cramjunkie, you did a great job. Good Luck to all and God Bless!

Passed today. Got about 10 new questions. One of the question required you to know SSL POP3 port no.

Thanks for the hard work guys.

Guys this Dump still valid, 98 % of the question came from this Dump. Good Luck and God Bless. Study don't memorize questions order I passed with 890 Yesterday. Thanks cramjunkie !

oops oops forgot the link http://mpwiki.viacode.com/default.aspx?g=posts&t=102045

Guys the question where
DC1 has DCHP scope for 10.10.10.0/24 network id. discover a warning message Scope, Scope1.. the Answer is G (Modify the start address). Here is the explanation. I hope it helps and good luck

Passed with 783/1000 today from UK.

Thanks to Cramjunkie for this great work.

Guys im writing this exam on monday. Feeling nervous about this one, hope the dumps helps me. Thanks for posting an excellent dump cramjunkie.

Valid in Doha passed w/880

it can be open only with cert exam v3.

which is the prerequisite for this certification? please?

@ GooGooli
Good luck mate. i just cleared 70-640 today. Cheers

@ Agent

Thanks. Wish me luck. I will sit this one next week.

@ GooGooLi
I cleared with 892 marks. made mistake in cmd questions.
Good Luck

@Agent10

Can you notice your score please? That`s important to know.

Thanks in advanced.

Passed Today with 785 .Thank You Guys. Valid Dump.

100% Valid. only 1 new question of IPv6- making a connection on the entire network using only IPv6. The question has ipconfig cmd used.
Answer is to allocate an IPv6.
Thanks Cramjunkie.

passed from 3 hours ago
passed with 721
this is the same as Anon 442 dump
3 or 4 new questions
good dump and goodluck to all

Hold thumbs guys, writing in the morning.Thanks for the dumps, hope they will help.

Ahright, passed with 900 recently myself.

I had 1 new multiple choice question I saw mentioned in another vce. It was about applying the same network policy to vpn1, vpn2, vpn3. Sorry can't remember the answer choices and cant find this question online. I had two drag and drop, 2 point and shoot.

FYI: This dump has same questions as Anon 442, which has many duplicates and a few wrong answers that I created in this dump. Both are good, just make sure to read posts in other dumps, and research when in doubt.

Good luck to you all.

Dump is valid!
Passed today with 721. I Think i got some new Questions.

Passed today
Still valid

Passed 871 , excellent Dump .
Thanks Cramjunkie

@ Prajh
Congrats!! I'll be taking it too by weeks end.

Passed, 935.

This dump has a lot of duplicate questions.

@Cky2k and Cramjunkie :
The right answer should be "B". Since Server1 hosts a "standard primary zone", it means it is not active directory integrated. Server 2 hosts a secondary copy and it is not mentioned if it is a DC.
But it says, "DNS replication" traffic, and not DNS transfer. Remeber, if DNS is AD integrated, its replication. If not AD integrated, then we have Zone transfers. I will go with B. Have my exam tomorrow. Lets see how it goes.

@ Eric, Congrats!!! Thanks for the feedback.

I will say know your ports, study Maxbox questions because I got alot of them. Other than that study this dump like a madman and you will be ok!!

Took exam today got875/900 ty Cramjunkie!! 2-3 new questions nothing major valid dump guys!!

Patrick
I see what you say and I guess there is some sense in what you saying.
But this question is really not clear and I hate Microsoft for this tricky stupid questions.

Looks like this one is wrong, as seen in other posts. It should be A. Detectnow

Question:
Your network contains an Active Directory domain. The domain contains a Windows Server Update Services
(WSUS) server named Server1. A Group Policy object (GPO) named GPO1 configures all computers in the
domain to use Server1 for Windows Update. You add a new Windows 7 computer named Computer1 to the
domain. From the Update Services console, you discover that Computer1 is not listed as a member of any
computer groups.
You verify that GPO1 is applied to Computer1.
You need to ensure that Computer1 is available in the Update Services console. What should you do?

A. On Computer1, run wuauclt.exe /detectnow.
B. On Computer1, run wuauclt.exe /reportnow.
C. On Server1, run wsusutil.exe reset.
D. On Server1, run wsusutil.exe listinactiveapprovals.

SAAR-
I had to look at this one too. I believe you need to modify the NTFS permissions beause user is a member of the "Authenticated Users" by default.
Which is already granted Change at the share level.
Correct me if I am wrong.

There is a question that realy bothers me.
Your network contains a file server named Server1. Server1 contains a folder named Folder1. the permission for Folder1 are configured as shown in the following table:
Group Name | NTFS Permission | Share Permission
----------------------------------------------------------------------------------------------
Authenticated Users | None | Change
----------------------------------------------------------------------------------------------
Group 1 | Read, Read & Exec |
| List Folder Contents| None

You need to ensure that only members of Group1 can add files to Folder1 over the network. What should you do?
Test says answer is "Modify the NTFS Permissions for Group1.
I say answer is "Modify the SHARE Permissions for Group1

What do you say?

have the maxbox questions been added to this dump?

Hi
I think in the Question 19 in Exam A the Answer C is correct
the format of Command is:

route [/f] [/p] [<Command> [<Destination>] [mask <Netmask>] [<Gateway>] [metric <Metric>]] [if <Interface>]]

http://technet.microsoft.com/en-us/library/ff961510%28v=ws.10%29.aspx