Pass Your Microsoft 70-643 Exam Easy!

anyone have read the first page after you press the start button or just click the next button until to start the exam ? the first page said some question will not count the score to your result !!!??

passed yesterday with 833.Had 80questions.this dump still valid. but many new questions around 17-20.

Relatively valid. Lots of new questions. I counted around 30 out of 80 that were actually in the dump. got 648 :(
I doubt very much that the new questions are not counted because i would have got 95% of the dump questions correct.
Jelous of those who passed.

Valid passed with 850, 17new questions
http://bit.ly/eVlRv3

to Asanga yes the dumb is still vaild ,but u will find alot of questions in the exam out of this dumb dont worry because most of these questions are not counted
an if u concentrate in this dump , u will got a high mark with my best wishes

plz check correct the file name and version detail

if u read the introducion before the exam u will find that microsoft states that the exam contains uncounted questions , the dumb still valid i didnt study any thing except this dump and passed with score 866 go a head with my best wishes

passed td with 933. thr r some new Q. around 20-30. so give the ans. carefully.

passed 866/1000. New questions not counted otherwise i would not passed. Some of the questions answer a bit modified. Go for it and do not be scared as long as the new questions are not counted.

oh, this board can not type chinese fonts,

all of you please make attention when you press the start button for the test and you can see the first page printed the word said all of the new question is not score to your result.

new question is diskpart command. diskpart /? and you can find out the anwser for the question.

dump is two hundred percent valid. if you make full score for your practice. you do not worry the question and must pass the exam. dont fool to make 1000 score.

Can anyone confirm that the new questions don't count against the score? I just took 70-642 and it was the same exact way. New questions, but they didn't count. I want to take this exam on thursday but want to confirm that the new questions aren't counted first. Thanks!!!!

I passed fridar 24th with 866.
80 question. 10 quesstion Diskpart utility.

Passed with a high score in the US. Still valid. LOTS of new questions though I don't think they were scored, scared me though.

Passed today 900/1000
take the risk don't be afraid about 25 new Q im sure u can handle them
plz tell us ur try result

@fayyaz how many question in the test? all of them are from this dump?

today i passed exam wtih the help of these dums.dums valid in pakistan.i got 933 marks

Passed just now with 800. The dump will help you pass. Do not worry too much about the new questions. Just go for it before it does start to count.

@yincfu
it is 200% or 20% vaild??

@Yincfu
how many new questions are you found?
thank you ^^

800 score.

200% valid dump.

New question a to x for diskpart command.

Thanks to bobycar. good luck all.

Passed today with 833,Exam really hard and consist of 80Q ,around new 20 Q but not included in score (it mentioned in beginning of the exam that you will find questions not included in score) most about diskpart as Eng-Eyad Baraka from Egypt , thanks to you all and God Bless.

This exam was very, very difficult and finds a new 30 questions and should be designed to guessing and retreat with a good technet pass today 766 alhamd llah and please see this link becuse some new 10 or 15 questions from this link and lock in technet before inter this exam
http://technet.microsoft.com/en-us/library/cc766465%28v=ws.10%29.aspx

http://technet.microsoft.com/en-us/library/cc758037(v=ws.10).aspx

This exam was very, very difficult and finds a new 30 questions and should be designed to guessing and retreat with a good technet pass today 833 alhamd llah

Valid, i have 29 new question. Total number of question was 80. I think new question are not counted to the result. I pass. Some questions are changed. e.g. we have cache/proxy server and publishing point server, the answer in dump is prestuff settings. In real test we have two answer with prestuff settings: prestuff in server 1 and prestuff in server 2. Analyze this question in dump.

Passed today with 766! Too forgetful to get above 800. Same 80 questions which some are not taken into account of the 1000 point; but I do not know how many were the questions that are not.

5 - 6 diskpart qs which are not in this dump.
Abt 10 - 15 new qs.

diskpart:
http://technet.microsoft.com/en-us/library/cc766465(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc758037(v=ws.10).aspx

Took the exam today. I think 50% new questions. The new questions were not very difficult. Some questions from the dump were a little bit changed, same answers, question a little bit changed. Take time to read the questions!!

Passed!

Passed today with 900 score. About 15 new q. Valid

Passed with 866, however many many new questions, I think around 40% not covered in the dump same as HelloWorld saidFirst of all, I had the test 80 questions and not 50 Be careful there are many questions about the DISKPART COMMAND on WDS and IIS
easy and I would even say difficult. this is not a test that you can say i'll remember this is a test that reflects your knowledge

Passed with 1000, however many many new questions, I think around 40% not covered in the dump.

Still valid, I passed today with 866! My exam consisted of 80 questions. 30 question were new. I had untill the 40th question bad feeling about it. I think that the new questions did not count for the end score.

passed with 933
do not be afraid
but,study hard and go on

Valid passed with 800
15-20 new questions

still valid 20 new question. 900/1000. pass. unexpectedly. ^^;;;

Dump is valid in the US as well. Same as everyone else has said, 80 questions with 50 counting.

933/1000.dumps still valid 100%. almost 20 questions were new. total questions was 80. but marking is done only on 50 questions........so enjoy guyz !!!!!!!

hello everybody! still valid. there are 30 questions that don't count for the final score. 900/1000 :)

Hi
Exam contains 80 q's but some of them are not from dump still easy to manage if u have study this dump well

MS exams never contains 80 questions that count for your score. Proberly you missed the text at the start what says that the 30 questions are not counting for your score.

Failed the test today. 80 questions. It's not sure, if there are counting now all questions. be aware.

If anyone could tell the subject of new questions on the exam. At least a few that are not in the dump. Perhaps even the real question?

thanks a lot everyone
Luk

who has those 30 new questions? Please upload it. thanks

this dump need update, more than 30 new question.

Koena From South Africa this exam is valid i did pass on 17 february with 800 score

Did exam last Friday, passed with 866/1000! 30 new questions but I guess they were not counting for the total score (i'd totally screw up if they would count).

Thanks again bobycar and all the other!

the dump still valid 866/1000

this dump need update, more than 30 new question.

Passed w/ 966. 80qs. I can confirm at least 6 were diskpart and the rest were media services (drag and drop) and additional sharepoint "point and shoots". That being said, I only studied this dump.nothing else. It's very obvious the new questions aren't scored because I'm sure I missed at least 15 of the new ones. Don't freak out, just know this dump and you'll be fine. Thanks to bobycar and others who contributed.

The dumb is valid.My score is 866 .20 new questions.I advice any one to study the dump very hard before enter the test to be certain form success.
thanks allah

Pass with 800 - 80 questions
30-40 new questions - other questions from this dump.

The dumbs is valid i scored 866 . but exam include about 15 new questions from 80 (Diskpart it is a new in this exam)

plz plz plz any one passed with 80 questions post these new questions watever 15 new or 30 new questions ?

Spain : 800/100 - 80 questios
20-25 new questions - 60-55 questions of this dumb
Some questions has small changes that change the correct solution.

Took the test today. Scored 966. The dump is still very much valid. About 20 new qs. 6 qs on diskpart. Cant really remeber the rest of the new qs. It does state in the beginning that there are a few new qs that will not be marked. So am assuming they dont count towards the final score. Good luck to all those yet to take.

new questions. 665/1000.. watch out!

The dumbs is valid i scored 766 . but exam include about 15 new questions from 80

@sharpE
Good catch. You're right, I looked past the definition of the log file and thought of it as a system log file. Thanks for the clear input!

886/1000 valid .but 80 questins.

n3tw0rk3r from Netherlands , the file is not valid,plz corect it. The size is 0.

100% valid passed today with 900 score mark, but the exam has 80 questions, thanx a lot guys keep

Wrote this today, passed with 733, about 20 new question, if i can give any advise know this exam really well, the new questions if i can remember some, were based on running command line tools for adding a drive to raid-5, mirroring a drive, basically know command line disk utilities. best of luck

@Samet: the answer there is "High".
It does not need Full - if you look closer, the requirement is to write to a specific log file, not the system eventlog.
And "medium" does not qualify, as the app needs permisions to write to a file OUTSIDE it's working directory (again, check the definition of the log file).

All thanks to Allah & beloved prophet & my peer o Mursheed
i Got 866/1000
80 questions 50 from this dump & 30 extra
mostly extra q depend on raid diskpart command & ftp
& ofcorse thanks Bobycar for ur effort

This question needs some clarification:

You install the Web Server (IIS) on a server that runs Windows Server 2008 R2.
You install a Microsoft .NET Framework application on a Web site that is hosted on the server in a folder named wwwroot.
The .NET Framework application must write to a log file that resides in the Program FilesWebApp folder.

You need to configure the .NET Framework trust level setting for the Web site so that the application can write to the log file.
What should you do?

Set the .NET Framework trust level to Full for the Web site.
Set the .NET Framework trust level to High for the Web site.
Set the .NET Framework trust level to Medium for the Web site.
Set the .NET Framework trust level to Minimal for the Web site.

The stated answer selects "Medium" as the trust level. Please reference this TechNet Article: http://technet.microsoft.com/en-us/library/cc754779.aspx

After examining the article, an easy way to digest it is to ask, "Okay, what's the difference between FULL and HIGH? What rights get taken away once I bump down to HIGH? By default, HIGH CANNOT write to the event log. Restrictions get even worse as you lower the trust level and more and more items are taken away by default. Therefore, the only way you can meet the stated requirement is to use a custom trust or select FULL! There is no option for custom trust in the provided answers so I'm defaulting to FULL as the answer. Comments?

Just passed with 833, 80 questions of which 50 are only taken forward to your exam count, dump is 100% valid!and thanks guys for all the help

nobody update 70-643 the latest dump in here very long time..so mournful and worry the exam>.<"

I will take the exam on 16th of march. I studied the book en this dump and some technet documents. I give it a shot and hope I will pass on this one! No one knows when the new questions are shuffeled into the normal pool.

@Tamas @Oranges, I highly appreciate your valuable feedback, it is people like you and a website like ExamCollection who make the hard studdying for an exam worthwhile. Thanks a ton all!

Samet- You're very welcome. I tried to answer all the concerns I had going into the exam.

Faheem- Yes the 50 question that counted were from the dump.

Just passed this morning in the UK. Scored 833/1000. 80 questions, 2-3 Drag&Drops, 2 Point&Shoots. I'm only studied this dump, roughly 20 new questions, I reckon most of the new questions were some kinda research questions because I didn't have a clue about the answers and I still passed. I know I got a few answers wrong from this dump, I couldn't prepare well enough for this test. So this dump alone should be enough for a PASS.

Thanks a lot everyone, and keep this site rollin'.

@Orange Thanks for the detailed input, man. That pretty much sums up what I was wanting to know.

elhmdullilah
Thx Bob for your efforts passed with 800 , 80 questions
thx for all

Hey Orange, were the 50 questions from this dump?

Took exam today and passed with 866 score. Total of 80 questions. If you read the screens before the test it tells you there are questions in the exam that do not count toward your score. Of the 50 questions that counted I did not have a drag and drop or a point a click. Best of luck to you all.

Approved today 13/02/2012. I think that microsoft is updating their exams because I did a test with 80 questions. Dump valid.

I take my exm 2day but 30 new quetion 7 on remote Desktop, 10 diskprt. any way pass 800 bt i am sure miz 16 quetion

alhamed to Allah
Dump is 100% valid 80 q
pass today with 800/1000, but have 16-18 new questions

i just passed today with 700/1000 there were 10 new questions . bt thanks bobycr for the dump this dump is stilll valid .

Leabanon how many quiz were inside test.

passed the exam 2 days ago in beirut, got 933 :) , 1 or 2 new questions

Last week passed this exam with 900 score. Used only this exam and technet. 80 questions (I think 30 questions were pilot questions).

TO- How did you score? Did the questions count toward your score? How many total questions did you have?

Took the test on 2/10. Couldn't tell you exactly how many new question there were, but it was around 20. Most of the new questions were on Windows Media Services. There were also about 5-6 questions on the diskpart command (ie: you have a RAID 5 config and need to replace a disk, what command do you run before replacing the disk). There were still a good number from this dump on the test, but you're going to have to do some extra studying on the Media stuff and need to learn all the diskpart commands.

well, I cannot tell if the new questions count or not to the final score. I made some educated guesses there, but was still guessing nevertheless.
from previous exams I took I know that if there are test-questions that are not rated this thing is notified in the pre-exam part. It might have been the case here as well, but I did not read that part, just next-next-next-start exam for me.
I got 966, fyi.
I just wanted to share the info about the new questions. How come that is a bad thing ?

80 questions, 30 new questions,,, this dump is valid in Azerbaijan,, 866/1000

@sharpE Don't get your panties in a wad. It just seemed strange that 30 new questions popped up all of the sudden and that people knew the count was 30. If you wanted to be helpful you could have posted your score so we can evaluate if those 30 new questions were weighted in the test at all. I'm assuming by your snarky attitude that you were too butt-hurt to admit you failed. I know the mods will censor this, lol.

I think the extra questions are getting ready for a new test. I did not have one question on diskpart but I had a lot of questions on Windows Media and WDS that were not in this dump

Yes, I had 80 questions. maybe there wer not 30 new questions as i said earlier, but there were quite a few. about 6 or 7 on diskpart, so learn those. 682/1000 for me. bummer. In South Africa

Just took and passed test with 933. Had 80 questions but I don't think they count towards the grade. I'm pretty sure that I missed at least 15 questions.

do these new questions count towards your exam result? i heard that microsoft were adding the questions, but they don't count towards your result.

Dump is 100% valid.
pass today with 866/1000, but have 16-18 new questions.
Thank you. Bobycar

Passed today with 860 score, but have 15 new questions...

hmmm, that is unfortunate. I am currently learning from the book and practice the questions. Is it true that the exam contains 80 questions? Exams usually count 50 questions. I hope the coming weeks, something more is known regarding the changes in the 70-643 exam.

well, mate, 3 people in a row are trying to help others. You can call it strange, but it's real. There were AT LEAST 30 questions that are not present in the dump.

All of the sudden there are 30 new questions? Can anyone else verify this? I find it strange that three people in a row can identify 30 is the count of new questions.

At least 30 new questions. 6 on diskpart command.
Really difficult. Failed with 682, South Africa

Pass the exam today, 80 questions, at least 30 new ones.

took the exam today, 80 questions, at least 30 new ones.
so beware :)

dump 100% valid brothers. passed today
thank you brother bobbycar

Still valid in Germany, passed yesterday with 885. 2 new questions. Thanks Bobycar

passed today with 900
still valid

This dump still valid , Passed to day with 1000/1000 -:)
Thanks GOD

Here is what I read from the Microsoft 70-643 Training Kit book
boot image - a WIM file you can use to boot a bare metal computer (no OS)

capture image - a special boot image used to start a master computer (one with an OS) and upload an image of that computer to WDS

image group - it is a place where you store capture images.

Since the question reads you are trying to capture an image of a server that already has an OS, you don't need a boot image. Before you create a capture image, you need to create a place to store that image, that's why the first step is to create an image group.

I will verify tonight.

Passed today 1000 alhamed to Allah
thank you babyacar all Q from this dump

Hi Folks,
some questions are Wrong
Exam I / 4: not B , it is A
Exam I / 16: not B , it is C
Exam C / 17: not D , it is B

Passed today.thank you bobcar

mayby The correct answer is Add image group

(not boot & not install)

@David & Tech.

The correct answer is boot. Install is **wrong**.

As ednr said below: http://www.windows-noob.com/forums/index.php?/topic/261-how-can-i-capture-an-image-using-wds/

In WDS you can either add boot image OR discover image.

The actual image/install is done after the booting, so Boot as 1st step is correct. (also note the answer in the dump - where the answer is "install", there is no "explanation" when you show answer. In the question that has the answer as "boot", when you click show answer there, an explanation from technet pops up - again Boot is correct)

Tech you are right
Q :
You have a reference computer named Server1 that runs Windows 2008R2.
You need to capture an image of Server1 to WDS1.
What should you do first?
a) Start Server1 from Windows7 installation media
b) Add boot image to WDS1
c) Add image group to WDS1
d) Add install image to WDS1
answer : c) Add image group to WDS1 first after that Add boot image to WDS1

the answer in same dump in exam k (Q Build and Reorder)

but the Q: Build and Reorder:
Your network uses Multiple Activation key (MAX) licenses.
A network technician performs a Server Core installation of Windows Server 2008 R2.
During the installation, the technician dose not enter the licenses key.
you need to activata Windows Server 2008 R2 on the server.
What should you do?
the answer not correct maybe
my answer :
Run slmgr,vbs -ipk
Run slmgr,vbs -ato
Run shutdowm.exe /r

David,
Here is a link from Technet. Correct answer should be image group.
http://technet.microsoft.com/en-us/library/dd363560(WS.10).aspx
It is in the second paragraph,
"To deploy .vhd images, follow the steps in this section. First, you will need to create an image group and add images to it. Then you create an unattend file and configure the server. After that, you will be ready to deploy and image. Note that configuring multicasting is optional."

First step is to create image group, then create install image.

David,
I actually believe the correct answer is image group. That is the first step before you can do anything.

100% valid. Passed 866 (just too stupid to get 1000.:-)

As usual all the pride and cherished For Examcollection and it's subscribers

Today ,pass 966/1000 , 100% valid , all Questions From This Dump

Thank You All.

100% valid dump . scored 866/1000
yarab fadel two tracks w a7'alas
.. Haitham

100% valid dumps got 933 marks today .!

Tech I wondered the same thing. I think the answer is install image so if the other question comes up just answer install image so you can memorize it and know that you got it right even if your score doesn't reflect it.

I wish someone would confirm the answer though just for both our peace of mind.

Dumps is 100% valid. I passed the test with 933 marks.

100% valid.passed today in Egypt :)

Please verify correct answer. On Windows Deployment Section, item #3 and #9 are the same question with different answers.

You have a reference computer named Server1 that runs Windows 2008R2.
You need to capture an image of Server1 to WDS1.
What should you do first?
a) Start Server1 from Windows7 installation media
b) Add boot image to WDS1
c) Add image group to WDS1
d) Add install image to WDS1

One question has add boot image to WDS1, the other question has add install image to WDS1.

100% valid dump.. passed today with 800. Thanks bobycar

100% valid dump.. passed today with 966. All Qs are from this dump only.
Its an amazing work by Bobycar. You are greate Bobycar.......

Valid!
Scored 1000 this morning!
Thanks for the upload!!!!

It's valid. Today I got 933

Hi everyone,
100% valid in India passed today with 840. All Qs are from this dump.
It is really a great dump with explanations. Thank u Bobycar

Hey guys thanks for all your comments as I'm gonna start tackling this one. I noticed two NEW QUESTIONS being experienced. One about WDS? The other I have no idea.

Could anyone PLEASE post exactly what the questions are, and the possible answers? That way we can update the dumps more accurate as well? Thanks so much for your input it's HUGE to all of us in the same struggle! Take it easy!

Passed also on today with 933 score.
And it is true, the Dump is still 100% valid, I had no new questions!

Passed today with 933 score. Dump 100% valid, no new questions

Thanks Bobycar for your laudable efforts !!!

Passed with a great score. 2 New Questions !

i pass today 883/1000 dump is valid in pakistan ,two or three question are new

Alhamdulillah i passed two days back with 933 marks in Kuwait, only refered this dump.
Thanks Bobycar for your good effort.

@irshaad,

only this dump enough to pass. I passed two days ago.

100% valid in Australia no new questions

@JackMate & Thanks to Jesus my God & David

http://www.windows-noob.com/forums/index.php?/topic/261-how-can-i-capture-an-image-using-wds/

i think that correct answer is

Add a boot image to WDS1

I passed this exam today. It is valid with two new questions.

Exam still valid in SA, got two new questions. Scored 866 today. Tnx BobyCar

Valid 100% - passed today 975 score

thanks allah . this dump is valid in egypt 100% . 50 questions pass today
850/ 1000
I like to say a last comment sympathy with Palestine

passed today! 2 new questions.
this test is really hard and confusing so learn as hard as you can!

thanks boby car!

820 today. 100% valid!! Must study harder, and aim for 1000 !
Thanks to bobycar and JESUS by Lord God and Saviour!

thx GOD i passed the exam today 940 score

this dump still 100% valid!
2 Qs new

now i'm Mcitp Certified

thx Bobycar
Best Regards

the dump still valid thanks

Dumps are 100 % Valid Got 910 . Thank you Bobycar you make my day God Bless you.

Thanks for all your input on my question but it only gives me the option to choose 1 answer. Not the order in which you would do things. I would assume you would select a boot image (winpe) then select a install image.

Thank you All Hindu gods and Jesus Christ for making me pass this exam

@JackMate Thanks I'll research that some more.

100% vaild dums

all questions are 100% 100% 100% vaild passed today

@david & @Thanks to Jesus my God :: Ther correct steps are 1) Add install image group
2) Add install image i.e. install.wim (In windows OS DvD go to sources there you will find Install.wim and Boot.wim files)
3) Add the Boot image under boot menu..
The install image contains actual OS component, installed aplications, patches etc

CAUTION: Quesions 271 & 274 NOT valid!
Fuer alle aus Deutschland, Oestereich und der Schweiz: Es kamen nur die ekligen Fragen dran. Besser ein Date weniger haben. And thanks bobycar. Passed with 910.

@David

Add boot image then add install image then capture image could be the process I would think.

I noticed in the windows deployment section the same question is on there twice.

Your network contain an active directory domain contoso.com blah blah blah

You install the WDS server role WSD1

You have a reference computer named Server1 that runs W2k8r2

You need to capture an image of server to WSD1

What should you do first?

Start Server from the windows 7 image (i know this is not it)
Add an image group to WDS1
Add an install image to WDS1 (one time it will say this is correct)
Add a boot image to WDS1 (another time this is correct)

Which is it install image or boot? I think i know but it's making me think im crazy.

I thank my lord JESUSCHRIST for helping me pass this test Dump is 100% valid a couple of drag and drop but all of them are in this test.Thank you Bobycar!

LOL is right!
Learn your material, get practice with dump, and pass the exam! If you won't do that nobody (angels, god or devil) will not pass exam for you!

Passed just 2hours ago with 970/100.Dumps are 100% valid.Thanks a lost BOBYCAR.you are great.

by the grace of great Allah I have passed the exam with 880 on 25-1-12.the dump is 100% valid no new Q.common guys go ahead n dont waste ur time.Also please accept Islam as religion those who r not muslims.thanks

thanx to my Allah
and thanx to bobycar
100% valid dumps pass today 25/1/12
940 marks no new question at all

This is dumps is 100% valid, but the answer for the quesitons are invalid in this dumps. I passed it with 760 marks

Passed today with 940. Dump is valid. Some drag and drop answers were different. No new Questions.

Dump valid pass today 790/1000. Change place answers.

Valid dump, passed today. 1 new question not in dump

thanks god
Passed today 24/1/2012 just one questions new thx bobycar

Valid in Israel. 50q. 970/1000. Good luck everyone :)

Passed 23/1/2012 with 1000/1000
just one questions new about WDS and very easy
Questions about install 10 vm one hard 30 GB
answer not like the dump in dump four action you arrange in exam 3 action is right answer without create differential hard just create differential vm . thanks to examcollection

@Anynomous

No, only 50 questions all from this dump.

They are simulations ( Testlets) on the 70-647 exam however.

Still valid in egypt ,, passed today 970/1000

Hi every one,
this Dump still valid,just 1 new q, I passed with 970/1000.
thank you bobycar.

Hi all,

Through examcollection we can help each other so i hope from any one post any comment be Honest

thanh you all guys

100% valid . All questions from this dump. Good luck !

(Q from Australia) i agree with you exactly this is a idiot. i am from Pakistan but this person is a mad. Q from Australia 3 time posting rely sorry my dear.
thank you
(jasim khan,aminlahore,naeem lahore) ary paghal tum ko kaya zurat the 3 time post karny ki is waja say tum log pachy ho apny ap ko thora sa thake karo yar thank you

Dump is valid 940/1000

You idiot. Don't post 3 times from different accounts just because you failed.

Can anyone else confirm that it's still valid or is it just random Pakistan idiot posting the same thing 3 times that he/she failed.

Valid in South Africa, passed with 850/900

Still valid in Holland. Passed last friday with 940.

100% Valid in Saudi Arabia
Passed today 970/1000

100% valid dump - passed with 910/1000 today in USA

100% valid in austria
thanks bobbycar

100% Valid
Pass today 20-01-2012 in Germany with 970. All Q From This Dump
Thank you Bobycar!!!

pass today 19-01-2012 with 940. 1 new Q.
thank you

pass today 18-01-2012 with 875. 6 new Q.

valid in NZ. only spent a few hours on this, 880/1000. do not just memorise the answers, UNDERSTAND them and you will be fine.

Thanks Allah . this dump is valid in Pakistan 100% . 50 questions pass today

thanks allah . this dump is valid in egypt 100% . 50 questions pass today

3 new question
pass 790

valid dump. 850/1000

Passed the exam - the dump is valid in NZ.
Cheers guys

The dump ist still valid. Only 2 questions were not from this dump ATTENTION,
the answer order has been changed, BE CAREFUL!

Dump is %100 valid. Passed today from India. Scored 880/1000.
Thanks Bobycar for uploading this dump.

Passed today from turkey 880 :) dump is %100 valid

Passed today with 880 score, no new question. :)

100% Valid in TURKEY. I passed with 970 yesterday(14.01.2012).
thanks BobyCar

Passed today in ISRAEL 1000/1000 , no new questions.

this dump is valid in Egypt i pass 2day with 985/1000
all questions come from this dump

Valid 100 % passed today 970/1000
thanks

100 % valid. Passed all 50 questions were from this dump.
Thank's BobyCar
880/1000

$$good luck for you all$$
@hi bobycar@
can u help me for exam 70-647..i'm waiting for ur dumps

Still working in spain. I passed with 1000

Can someone tell me how many question you recived about Raid / nas / san
i cannot get this in my mind

100% valid in the Netherlands

Still Valid in Netherlands

Still valid in Ireland, I passed it today 1000