Pass Your Microsoft 70-342 Exam Easy!

Hi, how you open yhose vce file? With which application?

Failed yesterday 682 ... not valid.

passed with 7xx............. lucky day for me

this dump is valid, passed today with 7xx

Thank you Judith, your dump is very valid.

Exam E = You need to implement UM for Sales Department users.
- Official Microsoft exam (there are three correct answers to fill in)

Jong is my dump

Exam E: You need to immplement UM for the Sales department users. ( i see 4 answers and in the official exam there need 3 answers)

Hi all.. there is a new dump for JONG,could anyone please check this dump out?
+
@Judith kindly let us know your answers,Thank you in advance for your help =)

Congratulations Judith.
Can you please upload a new VCE with correct answers?
Thanks a lot!

Actually I think Q58 regarding dial plans is as follows on reflection
Q58 - I believe the answer to the Q regarding moving UM to 2013 is
Add ex3 to dialplan1 = not required
Add ex4 to dialplan1 = not required
Add ex1 to dialplan2 = not required
Add ex2 to dialplan2 = not required
Add ex3 to dialplan2 = required

Site A has an IP PBX gateway, therefore Exchange UM dialplan must either be E.164 or Telephone extension. In this scenario no Exchange Servers need to be associated to a dialplan.
In site B there is a Lync Server. Lets assume this is enterprise voice. If this is the case then the Dialplan2 will be SIP URI in which case Both EX3 and 4 need to be associated with Dialplan2. There only appears to be an option to add EX3 to Dialplan2. Therefore I believe this is the only requirement for this question

I have the itexamfox PDF - I paid for it and it is the same as the Premium Dump here. There are a few errors I believe that I have managed to pick out alreadyMix questionsQ4: I believe the answer to be B and not Set-OutlookProvider as this command sets Global settings and not per siteQ15 - I believe answer to be A and D - move FSW to 3rd site and configure a hardware load balancer for the 2 CAS servers Q17 - I believe the answer is A and D as you cannot have a smart host (non Exchange) between your online and on-premise exchanges therefore, run the hybrid configuration wizard again and remove the smart host from the exchange online send connectorQ37 - I believe the answer to be D and export the autodiscover config to xml to update the SCP in the trusted forestQ41 - I believe the answer to be C and E - to create 2 DAGs and configure NY as the hub site. No need to be one DAG as mailboxes are only local to each site anyway, so no real point in having 1 DAGQ58 - I believe the answer to the Q regarding moving UM to 2013 is Add ex3 to dialplan1 = requiredAdd ex4 to dialplan1 = requiredAdd ex1 to dialplan2 = not requiredAdd ex2 to dialplan2 = not requiredAdd ex3 to dialplan2 = requiredThis is because UM in 2013 is split role between CAS and MBX and therefore both need to be associated to both dialplans. EX1 is 2010 HT/CAS/MBX and has no UM features,EX2 is 2010 UM server that they do not want to use.Q68 - Answer is One DAG, All servers, All replicas and enable DAC. You can set a DB to suspend activation so it can be activated manually. You would set this on the database replicas on the other site to ensure the DBs failed over to replica in same site and allow admins to manually activate replicas at other site in DC failure. DAC would prevent split-brain syndromeThe Case Studies look about right. Not researched them in depth yet.The above Q numbers relate to the premium dump, so apologies if they are slightly out. Hopefully you can figure out the ones I am on about.Exam on saturday - so lets see how it goes.

Questions are 100% valid.
There are a LOT of wrong answers though on this file. So verify the answers in this dump with a google/TechNet search

today pass the exam using this dumpe three new question score 7xx

HI Charlie,
how do you get the lead2pas v14.81?
or can you please send me a link to download the file.
please I'm writing sooooon!!
need help!!!

Can anyone help with this test?
i need to write soon!
please please please!!!!!

Passed today 8xx. Finaly my 3 MCSE and now i can relaxe:). Used this and premium dump. Cases and questions are real but some wrong answers.Study wisely and use google. Good luck

@Jordan
Admin will never upload your exam, if he uploads yours then who will buy from him.... :)

I failed using CARMEN 116q dumps, weakest side "Design, Configure and Manage Site Resiliency".

Is this valid????

Is this valid????

Dumpa is valid. Passed 860.
All questions in this dump.

TKS

The dump is valid an answers are wrong. I used to itexamfox 126q. I passed today 7xx. Valid in Turkey. All the best

This dump is 100% valid and you can pass exam with this sump, all questions from this dump

Thanks CM !!

This Dump is still valid Passed today with 746 Score. All questions from this dump
With best of my memory the Q's are below:

5 Case studies and 31 Q's

Q37 Q19 Mixed Q19 Q9 Q8 Q40 Q16 Q42 Q23 Q18 Q1 P4S Q16 Q17 Q10 Q31 Q15 Q28 Q49 Q47 Q39

Q44 Q26 Q4 Q7 Q12 P4S Q7 Q20 Q32 Q43 P4S Q8 Q14 P4S Q15 Mixed Q18 Q38

ADATUM Q9 Q8 Q5 Q2
Contoso Q6 Q7 Q4 Q2 Q3
Fabrikam Q3 Q5 Q1 Q9
Proseware Q3 Q5 Q9 Q7 Q2 Q6 Q4
Trey Q5 Q10 Q4 Q7

Thanks CM !!

Is this valid ??????

Is this valid dump ??????

Failed today using the Premium Dump got 684. All questions are from the premium dump bur alot of worng answers. dont buy it, not good enough to pass.

All questions are from the dump, but answers need to be verified. Use with extreme caution!

Failed using the Premium Dump 680. All questions from the premium dump I memorised the answers over 2 weeks so I know what I answered in the exam were identical to the premium. Don't waste your money, it is not good enough to pass.

link for lead to pass 128q exam please...

Questions still valid, not all answers ok but enough to pass

Dump valid ,
i passed with 79x all question was on dump And I think some of the answers are wrong, study hard and good luck
Thx CM

Yesterday pass with 723.

Passed 746. Used ipass4sure, CM and Mike.

Is it valid till now?

700 pass thanks cm

Is it valid in Bangladesh?

Valid dump
today passed with 700
All questions valid
many wrong answer
thank you CM

Passed Yesterday With 769 all question from this dump but many wrong answer.
If you study this will you will get 7xx.

Passed today 7XX
Exam is challenging, some obvious wrong answers in this Dump but enough to pass...study hard and good luck,

Has anyone tried the Premium VCE File as yet?, be interesting to get some feedback.

Hi Guys,

I passed this exam with low score.

Please do a research, read through all of the comment, especially Booga

The question is valid 95%
the answer is valid 70% so be more careful :)

Adatum Case study.. DAG figures question.
The case study says that they have 2 different domains, one for the U.S “adatum.local” and one for Canada “Canada.adatum.local”

Microsoft’s supported scenario says that: "Each Mailbox server in a DAG must be a member server in the same domain."

Ref.: http://technet.microsoft.com/en-in/library/dd638104%28v=exchg.150%29.aspx#GR

I presume that the Toronto is a part of Canada domain. The correct answer should be the Top Right figure with 3 DAGs

I´ve just passed with a score of 70x, all question was on dump but some answers are wrong. I suggest to evaluate different dumps and read the related tech articles.

TREY RESEARCH
Q2 – confirmed on technet
• Set-mailbox
• Hard Delete, Move
• MessageBind, Create
Q9 confirmed this one also:
• Create a new mailbox database a mount the restored database
• Run the set-mailbox
• Run the retry-queue
After the database is mounted, modify the user account settings with the Set-Mailbox cmdlet so that the account points to the mailbox on the new mailbox server. To move all of the users from the old database to the new database, use the following syntax.
Get-Mailbox -Database |where {$_.ObjectClass -NotMatch '(SystemAttendantMailbox|ExOleDbSystemMailbox)'}| Set-Mailbox -Database
Trigger delivery of any messages remaining in queues using the following syntax.
Get-Queue Queue Name | Retry-Queue -Resubmit $true
Q10 I am going C and D
New-ManagementRole -Name "Discovery Management for HR" –parent Discovery Management
New-ManagementRoleAssignment -Role " Discovery Management for HR " -SecurityGroup "HR" -RecipientOrganizationalUnitScope contoso.com/Finance/users

• New-managementroleassignment
• New-managementrole
Q5 Is correct, answer are:
• New-publicfoldermigrationrequest
• Set-organisationconfig
• Set-publicfoldermigrationrequest
• Resume-publicfoldermigrationrequest
New-Mailbox -PublicFolder -HoldForMigration:$true
New-PublicFolderMigrationRequest -SourceDatabase (Get-PublicFolderDatabase -Server ) -CSVData (Get-Content -Encoding Byte)
Resume-PublicFolderMigrationRequest \PublicFolderMigration (OPTIONAL)
Set-OrganizationConfig -PublicFoldersLockedForMigration:$true
Set-PublicFolderMigrationRequest -Identity \PublicFolderMigration -PreventCompletion:$false
Resume-PublicFolderMigrationRequest -Identity \PublicFolderMigration

All steps described here, not all cmdlets are given as options in the question, but these ones are for sure
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx

Passed this morning, but with very low score: 723 (minimum is 700)
Questions: 95% VALID (very little differences)
Answers: 70% VALID (so take care!)

CONTOSO
Q3 – correct answer provided, I guess
$ski = [System.Guid]::NewGuid().ToString("N") (this creates unique id for subject identifier on the new CERT)
New-ExchangeCertificate -FriendlyName "Exchange Federated Sharing" -DomainName $env:USERDNSDOMAIN -Services Federation -KeySize 2048 -PrivateKeyExportable $true -SubjectKeyIdentifier $ski
Get-ExchangeCertificate | ?{$_.friendlyname -eq "Exchange Federated Sharing"} | New-FederationTrust -Name "Azure AD authentication"
Get-federateddomainproof
Create new TXT record
But new-exchangecertificate isn’t available which assumes the cert already exists, in this case the cert thumbnail can be specified directly with the new-federationtrust cmdlet, so Im going with:

New-FederationTrust -Name "Microsoft Federation Gateway" -Thumbprint AC00F35CBA8359953F4126E0984B5CCAFA2F4F17
Get-Fererateddomainproof
New TXT record

Not enough clues on this in the case study, another ridiculous question. Also the below says they recommend using a self signed certificate. I feel like this question either has multiple correct answer or its just stupid

Certificate requirements for Federation
To establish a federation trust with the Windows Azure AD authentication system, either a self-signed certificate or an X.509 certificate signed by a certification authority (CA) must be created and installed on the Exchange 2013 server used to create the trust. We strongly recommend using a self-signed certificate, which is automatically created and installed using the Enable federation trust wizard in the EAC. This certificate is used only to sign and encrypt delegation tokens used for federated sharing and only one certificate is required for the federation trust. Exchange 2013 automatically distributes the certificate to all other Exchange 2013 servers in the organization.

Q4
• AD FS
• Directory Synchronisation tool

AD LDS doesn’t suit, I looked this up
An internal root CA doesn’t seem related
AD RMS is for assigning policies
This leaves the other two

Q2
• Create a new retention poicy tag
• Create a new retention policy
• Set-mailbox
As below retention policies are groups of retention policy tags, these can be applied to default folders such as inbox, sent items
http://technet.microsoft.com/en-us/library/dd297955(v=exchg.150).aspx
Q7 – new receive connector really needed? If you have to choose two then I will, otherwise not needed
Q8 A new-transportrule must be used, outlook protection rules don’t apply to outlook 2007 and can’t be applied to groups
• Create an Active Directory Group
• Create and configure an AD RMS template
• New-transportrule

Q6 I have researched this and only two commands are required even though it requests 3. It just DOESN”T MAKE SENSE
• Stop-databaseavailabilitygroup to register the powered off member as stopped
• Restore-databaseavailabilitygroup to evict them and bring up second site as active
DAC (database co-ordination mode) is enabled which simplifies the whole restore process and doesn’t require the use of cluster tools

The Stop-DatabaseAvailabilityGroup cmdlet is used during a datacenter switchover. This cmdlet is used to mark one or members of the DAG as failed (also known as stopped).The Stop-DatabaseAvailabilityGroup cmdlet can be run against a DAG only when the DAG is configured with aDatacenterActivationMode value of DagOnly.
The Restore-DatabaseAvailabilityGroup cmdlet performs several operations that affect the structure and membership of the DAG's cluster. This task does the following:
• Forcibly evicts the servers listed on the StoppedMailboxServers list from the DAG's cluster, thereby reestablishing quorum for the cluster enabling the surviving DAG members to start and provide service.
• Configures the DAG to use the alternate witness server if there is an even number of surviving DAG members, or a single surviving DAG member.

ADATUM
Q10
I am going BOTTOM RIGHT
BUT it shouldn’t be
Remember Hardware costs must be minimized makes me want to select the bottom right but this isn’t a recommended DAG config as below. The impact on end users if a site fails must be minimized, If it actually specified by what it meant by a site failure the question would make sense. if it was a WAN link failure in a site those servers would go offline due to quorum failure. A DAG in each site resolves this, I think it’s the only option.
Also when it mentions each user must be able to access its internal resources, it may be referring to its local exchange server
As below Microsoft recommend a separate dag for sites actively serving users
http://technet.microsoft.com/en-us/library/dd979781(v=exchg.141).aspx
To deploy highly available Mailbox servers in a multiple datacenter environment, where each datacenter is actively serving a local user population, we recommend that you deploy multiple DAGs, where each DAG has a majority of voters in a different datacenter, as illustrated in the following figure.
The operational management tasks associated with DAGs include:
Using multiple database availability groups for site resilienceIn the preceding example, a single DAG extends across multiple datacenters, providing site resilience for either or both datacenters. When using a single DAG to provide site resilience in an environment where each datacenter to which you extend the DAG has an active user population, there is a single point of failure in the wide area network (WAN) connection. This is because quorum requires a majority of the voters to be active and able to communicate with each other.
In the preceding example, the majority of voters are located in the Redmond datacenter. If the Dublin datacenter hosts active mailbox databases, and it has a local user population, a WAN outage would result in a messaging service outage for the Dublin users. When WAN connectivity breaks, only the DAG members in the Redmond datacenter retain quorum and continue providing messaging service.
To eliminate the WAN as a single point of failure when you need to provide site resilience for multiple datacenters that each have an active user population, you should deploy multiple DAGs, where each DAG has a majority of voters in a separate datacenter. When a WAN outage occurs, replication will be blocked until connectivity is restored. Users will have messaging service, because each DAG continues to service its local user population.

PROSEWARE:
Q2 Simply cannot find any reason to use set-databaseavailabilitygroup,The correct procedure is use Set-Databaseavailabilitynetwork Twice, once for enabling replication on the REPLNET network and the other for disabling replication on the MAPINET network. The exam will not allow you to answer in this structure, so have to use
Set-Databaseavailabilitygroup
Set-Databaseavailabilitygroupnetwork
Resume-mailboxdatabasecopy

Set-DatabaseAvailabilityGroupNetwork -Identity DAG1\replnet -ReplicationEnabled:$true
Set-DatabaseAvailabilityGroupNetwork -Identity DAG1\mapinet -ReplicationEnabled:$false
Resume-mailboxdatabasecopy

Q5
Set-TransportConfig is correct, but with
With the RejectMessageOnShadowFailure set to $True
Q1
Mail.proseware.com should be used internally and externally with external round robin DNS
External Round Robin DNS because internal round robin would be sending client connections to both sites across the WAN and there is a specific mention: User traffic on WAN links must be minimized
ACF

Q7
I spent hours on this question, the answers are stupid. The request is:
Several Users at Contoso will use a mailbox at Proseware as their primary mailbox. The contoso users will use autodiscover to configure their client settings and will use single sign on
Certain users in both Companys will have a @contoso.com SMTP Suffix as their primary email address
I think all that is needed is: is an outgoing trust from proseware and linked mailboxes

A trust between the Exchange forest and at least one account forest must be set up before you can create linked mailboxes. At a minimum, you must set up a one-way, outgoing trust so that the Exchange forest trusts the account forest. For more information, see Learn more about setting up a forest trust to support linked mailboxes.

Passed today 749!!

Valid in Italy! Passed 7xx. Many wrong answers, 2 new questions.

the dump still valid, Passed 21 may 2014 with score 769. total 52 questions, 31 mixed questions and 3 cases each one has 5-6 questions.

all the questions from this dump and i answered as the dump said, but according to my score some answers is wrong, according to this score i answered 12 questions wrong !!

the answers in the dump needs some review but anyway the dump is enough to make you pass.

QUESTION 9
[FABRIKAM Q 9]
The Security Department implements a new Firewall between the IP-PBX system and the Servers in the Tampa
Office.
You discover that SIP Sessions cannot be established between the IP-PBX and EX1.
You need to identify which Ports must be opened between the IP-PBX and the Exchange Server 2013 Servers.
Fabrikam, Inc
Overview
General Overview
Fabrikam Inc., is a plastics manufacturer.
Fabrikam has an Exchange Server organization that contains only servers that have Exchange Server 2013
installed.
...................
...................
Which ports should you identify?
ANS :

CAS : TCP 5060
MAILBOX SERVER : TCP 5065 ,TCP 5067
: UDP 1024-65535

Is this ans is correct of CM dumps???

FABRIKAM 9
QUESTION 1
[FABRIKAM Q 1]
The Internet link in the Tampa office will be unavailable during the weekend.
You need to ensure that all outbound email messages are sent from the Charlotte office
Question No : 2 - (Topic 1)
Microsoft 70-342 : Practice Test
Guaranteed success with TestInsides practice guides 5
during the planned outage.
What should you do?
A. Modify the cost of the Tampa SMTP Send connector.
B. Create a new mail exchanger (MX) record named SMTP2.fabrikam.com in the internal
DNS zone.
C. Modify the smart host of the Tampa SMTP Send connector.
D. Modify the preference value of the fabrikam.com mail exchanger (MX) records.
Answer: C in CM dumps but ans (D)in test insides dumps which one is correct ?

QUESTION 47
[MIXED QUESTIONS QUESTION 47] of CM
Your Company has two offices.
The Offices are located in New York and San Francisco.
You have an Exchange Server 2013 Organization that contains two Servers.
The servers are configured as shown in the following table.
Pls see the CM dumps for picture
The Organization contains four Mailbox Databases.
The Mailbox Databases are configured as shown in the following table
Recently, DB1 went offline because of a disk failure.
The disk is restored and DB1 is mounted.
You discover that there are more than 10,000 email messages queued for delivery to DB1.
You need to preserve the messages and perform the following actions:
- EXPORT THE MESSAGES QUEUED FOR DELIVERY TO A DIFFERENT DRIVE.
- CLEAR THE MESSAGES QUEUED FOR DELIVERY.
- ENSURE THAT THE MESSAGES QUEUED FOR DELIVERY TO DB1 ARE DELIVERED WHILE
PRESERVING THE ORIGINAL MESSAGE HEADER INFORMATION.
- PREVENT DUPLICATE MESSAGES.
Which four actions should you perform in sequence?
(To answer, move the appropriate four actions from the list
of actions to the answer area and arrange them in the correct order.)
Is this correct order ???

1. Suspend the message in the queqe
2.Export the msg in the queue.
3.remove the msg in the queue
4.copy the exported msg to the replay directory

QUESTION 69 of CM
You are a network administrator for a company named Contoso, Ltd. You install the Active Directory
Rights Management Services server role on a server. The Active Directory Rights Management
Services (AD RMS) server uses an internal certification authority (CA) for all certificates. You plan
to provide users with the ability to use AD RMS to protect all of the email messages sent to a
partner company named A . Datum Corporation. A . Datum does not have AD RMS deployed. You
need to identify which components from the Contoso network must be accessible to A . Datum to
ensure that the users at A . Datum can open protected messages. Which two components should
you identify? (Each correct answer presents part of the solution. Choose two.)
A. The Active Directory domain controllers
B. The Client Access servers
C. The certificate revocation list (CRL)
D. The Mailbox servers
Correct Answer: AC

Is A & C are correct ans ???

QUESTION 56
[P4S NEW QUESTIONS Q 7 in CM dumps
A company named Contoso, Ltd., has an Exchange Server 2013 Organization.
The Primary SMTP Suffix for all users is contoso.com.
A Company named Fabrikam, Inc., has an Exchange Server 2010 Organization.
The Primary SMTP Suffix for all users is fabrikam.com.
The users in both Organizations access their email by using Microsoft Outlook 2010 and Outlook Anywhere.
All of the users work from Domain-Joined Client Computers that connect to the internal network.
Contoso acquires Fabrikam.
You establish a Cross-Forest Trust between the Contoso Forest and the Fabrikam Forest.
In fabrikam.com, you create a User named User1.
In contoso.com, you create a Linked Mailbox for User1 and you set the Primary SMTP Address to
User1@fabrikam.com.
User1 reports that Outlook 2010 fails to configure his Mail Profile Automatically.
User1 can manually configure his profile and connect to his mailbox.
You need to ensure that users in fabrikam.com can find their Mailboxes Automatically.
What should you do in contoso.com?
A. Create a DNS Record named autodiscover.fabrikam.com.
Point the Record to the Virtual IP Address of the Client Access Servers.
B. Modify the ExternalURL of the Autodiscover Virtual Directory on the Exchange Servers 2013 Servers.
C. Modify the Autodiscover Service Connection Point (SCP).
D. Run the Export-AutoDiscoverConfig cmdlet on an Exchange Server 2013 Server.
Correct Answer: D
but in test insides dumps ans is (B) .
So which ans is correct D or B ???

MIXED QUESTIONS QUESTION 49 of CM
You have an Exchange Server organization that contains five Servers.
The Servers are configured as shown in the following table.
Pls see th table in MIXED QUESTIONS QUESTION 49]
You deploy Microsoft Lync Server 2010. You need to create a Lync Server SIP Unified Messaging (UM) Dial
Plan to enable voice integration between Lync Server and Exchange Server.
Which three Exchange Servers should you associate to the UM Dial Plans?
(Each correct answer presents part of the solution. Choose three.)
A. Server1
B. Server2
C. Server3
D. Server4
E. Server5
Correct Answer: ABE
Is this correct ans ???

MIXED QUESTIONS QUESTION 10 in CM :

is this question order is correct:
1.Install the french UM language pack on the servers in the France office.
2.create the dial plan named contosofrance.
3. Assign the ContosoFrance dial plan to the users in the france office.
4.create UN hunt.
5.Create a UN auto attendant named contosoFrance

Please clarify is order is correct???

MIXED QUESTION 38 in CM dumps:
You have an Exchange Server 2013 organization that has Unified Messaging (UM) Enabled for all mailboxes.
The organization is configured to use an IP gateway to connect to a legacy PBX.
An administrator recently performed some configuration changes.
After the changes, users report that their voice mail is no longer being delivered to their
Exchange Server mailbox. The users do not report any other problem.
You need to identify which configuration change causes the issue.
Which cmdlet should you run?
A. Test-UMConnectivity
B. Test-CsExUMConnectivity
C. Test-ExchangeUMCallFlow
D. Test-CsExUMVoiceMail
Answer: C
But in Testinsides ans is (A) which one is correct ? A or C ???

QUESTION 10
[TREY RESEARCH Q 10]
You need to implement a solution that meets the compliance requirements for the members of the Legal
Department.
Which two cmdlets should you use?
A. New-RoleAssignmentPolicy
B. Add-ManagementRoleEntry
C. New-ManagementRole Assignment
D. New-ManagementRole
E. New-ManagementScope
Correct Answer: AC
but in Testinsides ans is (B & D), What are the correct ans ???

Passed yesterday with 769 using this dump. The weekest topic was "Design, Configure and Manage Site Resiliency".

I fail to day 664.

682...failed. I took my exam today and studied the examcollection's questions but couldnt pass it. are the all questions correct?

Or at least if you know what answers were different? I tried to find it,but everyone is saying different stuff..

anyone knows where i can find cbt nuggets or traisignal courses? thanks

Valid, but close.
Passed in Holland with 723

Questions are Valid but few answers are wrong, Please do research and go trough the comments "Microsoft.Testking.70-342.v2013-08-10.by.Mike.116q.vce" to find the correct answers. I have scored 840.

Valid in South Africa

This dump is still valid in Bolivia.
Passed last Monday with 769.

Valid in Canada just passed with 746

This dump is 100% valid with a few changes. And I think some of the answers are wrong. Anyway it is sure that you can pass with 700+ . Got 746. From SG.

this dump is 100% valid in Pakistan, on Saturday I passed this exam with 723.

All the questions were on this dumps but need to research the answers..Any new updated dumps...now I am trying for second shot..

is there a 2nd confirmation? this dump covers all the questions?

Still valid in Italy, just passed today 7xx. 5 case studies and 31 single questions
All questions from this dump. All the answers are from the dump too but many of them are wrong.
I found just 1 different answer that i wanna share with you, CONTOSO Q6 about failure on montreal datacenter, answers were:
1) Start-DatabaseAvailabilityGroup cmdlet (as from dump)
2) Restore-DatabaseAvailabilityGroup cmdlet (as from the dump)
3) Stop-DatabaseAvailabilityGroup cmdlet (as from the dump)
4) Start-service clussvc on EX3 (new)
5) Start-service clussvc on EX4 (new)
6) Stop-service clussvc on EX3 (new)
7) Stop-service clussvc on EX4 (new)

and always 3 answers to give...
good luck to all!

I believe examer is correct for Q16 - 69 Mixed.

http://technet.microsoft.com/en-us/library/hh311037%28v=ws.10%29.aspx

which part is not valid? wrong answers? or new questions?

not valid 586

Is valid this VCE?
More VCEs?
Regards and thank you

This dump was a fail. I used this only, so heads up for anyone else. Sign up for that second shot! Microsoft.Braindumps.70-342.v2014-03-03.by.CM.116q.vce

I pass this exam today with same dumps 7xx.
note that you can't pass this exam without a little research if you want to pass it for sure you need to score everything in the dumps.good luck Guys

There is no way you will pass this exam strictly based on this dump. You need to do your research, Lab Setup, run the commands, challenge the questions on this dump. I found over 50% answer choices were not included in this dump. That means if you don't know it, you probably won't pass. Best of luck to you all.

Hello
Is valid this VCE ?
Regards

Passed with 7XX all Questions were from the dump..

(Mixed Questions Q 25)
Selected Answer in Dump is B, D Given Answer seems contradicts each other.
I feel answer should be A, E

(69 Mixed Questions Q23)
Given Ans is B,D,
My answers,
A - Deploy a Hardware load balancer to Ex3 and Ex6.
D - move the file share witness to server1


(69 Mixed Questions Q47)
My Thoughts First selection should be (Suspend the Queue) not the Suspend messages

@ mtrx, you cannot create database copies outside of it's DAG, so the three DAG option is not correct. The answer given is correct.
http://technet.microsoft.com/en-us/library/dd979802(v=exchg.150).aspx

Adatum Q10 - Wrong.

The answer must be upper right picture with 3 DAGs. The point it that if the connection between sites drop you will lose whole site or whole DAG . In this case the only suitable answer Is to create 3 DAG separate from each other .

Proseware Q6 regarding email security requirement is wrong


All email messages stored in the mailbox databases must use S/Mime. Domain security can't encrypt messages in the DB

Email recipients option should be "Domain Security" as domain security guarantee that the message is not altered in transit. It seems to be a logical answer because Proseware is evaluating Office 365

Valid in Italy 7xx, combo with the following vce:
2013-12-26.by.CM.116q.vce
2014-03-03.by.CM.116q.vce

Hello how accurate are these answers now ?should i pass with these testexams or is a little research needed on this actual ?

This is valid in Oman. Got 785 today.

i updated this dump before uploading it with the changes suggested by booga, so you should atleast pass with 700. best of luck

I Passed the exam with 746 from this dump and the other ones, as well as fixing a few questions after research.

Anyone used the premium VCEs by any chance??

is this a valid dump im taking my exam this week.thanks.

just passes with a score of 70x, all question was on dump

Adatum Q5.
I don't see how disabling all the other rules will allow the DLP policy to stop from sending the sensitive data out.

If you want to block the data from being sent I feel like you need to just deselect the allow override options.

I feel like 69 Mixed questions q 23 should be A and D.

DNS Round Robin would result in the possibility of users getting routed to a site that is down. If a layer 7 hardware load balancer was implemented then the LB could detect the down service and route users appropriately.

Thoughts?

Hi, i think that adatum Q9, trasport rule, an email address policy should be correct
q16 69 mix should be A,C http://technet.microsoft.com/en-us/library/dd983939%28v=ws.10%29.aspx