Pass Your Microsoft 70-642 Exam Easy!

In response to Mohamed from Egypt:

I am pretty sure that you must use a GlobalNames zone to access Web1.

This is because the forest has THREE trees. If there was a single tree, an alias would work. But because there are three trees, you would also need to configure a suffix search list on every client to guarantee finding the alias.

I passed the exam 70-642 yesterday with 1000/1000.
All questions was from this dump.

Passed today with 1000 points in Germany.
All questions from this dump.

Studied with this dump and with dump from MohamedAbdElhamid.

No new questions.

100 % valid in Egypt passed today 970 thnx Mohamed & eddy

Passed yesterday in Holland with 910/1000.
All from this exam, Thanks Eddy and Mohammed!

Passed this exam on Friday, 4 May 2012 with score 880. No new questions on the exam. I only studied Eddy dump and answered all questions exactly as they appeared on this dump. So yes, there are a few wrong answers but there is enough right answers here for you to pass this exam. Thanks Eddy (and Mohammed) for all your efforts.

took the exam on 2 days ago, over 900 pts, 98% from this dump, only 1 unfamiliar but easy question. Thanks, Eddy, this stuff is valid!

@Omar
Did you correct any f Eddy's answers?

Dumb is Valid in PALESTINE, got 1000 today . Thank you Eddy.

Hi all.. I just certified 70-642 using this dump and Mohammed's dump, but after correcting some worng answers.. i got 1000 :))))
I'll post my dump here in few hrs after getting back from work.
thx for Eddy and Mohammed :))) Hamdollelah Rab El-Ala'lamin (Thx God, God of all beings)

Hi friends,

I passed today (30/4/2012) this exam 1000/1000 in Dubai UAE
all 50 questions from this dump

Thanks a lot for all uploaders, lets move to 70646 exam :)

Passing the exam with 880 score, please review 280q dumps from Eddy dump (MohamedAbdElhamid) still valid here at philippines. Thanks a lot for this dump. Good luck!

Passed 880 today . still valid Sri Lanka.. thanks Eddy.

I passed Yesterday with a 940 ,i used this dump

Passed using this Dump only 940 score, saw 2 new questions fairly easy questions. Of course as many mentioned before there are some wrong answers in this dump.

Also regarding question 237, the correct answer is the one with /resetlistenaddresses. This tells the dhcp server to listen on another interface (so you can specify the one configured with an IPv6 IP).
The explanation is simply refering to the case when you have to enable IPV6 support on a dhcp server.

The correct answer is therefore C.

@aringan:
DirectAccess has to be installed on a server with two network interfaces, one for the intranet and one which is facing the Internet. The one facing the Internet needs 2 IP (v4) addresses configured and these 2 IP-s have to be consecutive.
The question states that there are two Internet facing network interfaces. So what you have to do is keep the one with the default GW (Internet1) and add the IP address of the Internet2 interface to Internet1.
The answer is C

Please take a look at the question N.246 ;

Your network contains a server named Server1 that runs Windows Server 2K8 R2.
The network for Server1 is configured as shown in the table.

A- Add the IP address of 10.1.2.2 to LAN1
B- Remove the IP address of 131.107.1.13 from Internet2, and then add the address to LAN1
C- Remove the IP address of 131.107.1.13 from Internet2, and then add the address to Internet1
D- Add the default gateway of 131.107.1.1 to Internet2

the dump says the answer is c but I think that the answer is D , please any one help about it

@Reza Ali ;

could you please tell us about wring answers and where did you find the correct ones ?

@EDDY
you have mentioned that Exam C Q:23 was one of the corrected questions but the answer in this dump and the older one is the same and it is option B, so is it OK ? and about question 237 ;
your network contains a server named server1
that runs a server core installation of windows
2008 R2.Server1 is configured as a DNS server.
you need to ensure that server1 only resolves
name queries from IPv6 clients ??

dump answer is C.Run dnscmd.exe and specify the /resetlistenaddresses parameter

but the explanation says ; type the following command;
dnscmd /config /enableIPv6 1

so which one is correct ??

Dumps 100% valid, I got 940/1000 today, but there are some wrong answers. All questions were from the dump, no new question.

@Liz&Eddy, regarding Exam D - Q2
Your network contains a server named DC1 that runs Windows Server 2008 R2. DC1 hosts an Active Directory-integrated stub zone named contoso.com. You need to ensure that DC1 contains the most up-to-date records for the zone. What should you do?

Correct answer must be: D - From DNS Manager, click Transfer from Master.

For example: You have a DC1 with AD (domain.com) and a partnerdomain with DC2 (contoso.com). Both domains run on their own, but are connected to the same network.
Now you allow zone-transfers on DC2 to DC1, then you create a stub-zone (AD-integrated) on DC1, what means that you replicate YOUR own domain-structure (domain.com).
But that´s not the question in this task.
You have to have the most up-to-date records from DC2´s contoso.com Zone.
So if you right-click the created stub-zone on DC1, you will only be able to "Transfer from Master" and this works.

So answer A, can´t be right at all.

Passed today with an 880. I used THIS dump, and THIS dump only. EVERY single question was from this dump. I ran through the dump multiple times, the week leading up to the exam. I ran through it twice the night befor and once this morning before taking it. At that point, I was getting a 940-970 each time. There were at least two questions that I know I messed up on, the rest were simply 'errors' in the dump. But..not too shabby!! Good dump, thanks guys!

Dump 100% Valid, Passed today 970 , 50 questions,All questions from this dump. Thanks

Passed today 1000 score. I used lots of dumbs, but I mostly relied on EDDYs dumb. all of the questions were from the dumb, didnt have any sims or drag/drop. use the dumps asap..

Does anybody knows the right answer.

Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.
Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2. You need to restore the company's Windows SharePoint Services (WSS) site to Server2.
What should you do?

A.
Use Wbadmin to restore the system state from backup.

B.
Run Wbadmin with the Get Versions option. Install WSS.

C.
Run Wbadmin with the Start Recovery option. Install WSS.

D.
Use Wbadmin to restore the application and the sites from backup.

Passed today with a score of 880. Thanks everyone and all the best

I passed today. This was my second attempt and todays test was 50qs, no testlets. Thank God. I saw new questions that I had not seen on the dumps. There were some questions from the dumps. 20% easy questions from the dump, 60%toughest questions from the dump, 20 % new questions. I passed. It was a hard exam. Now, on to 646 for me. Good luck to everyone!

This exam is 100% in SPAIN. I take this exam today 20/04. I answered the questions exactly with this VCE and I scored 850. Therefere there are 15% not correct questions in the exam. // Buenas a todos, he hecho el examen esta mañana. El examen era de 50 preguntas y todas estaban en este VCE. He contestado las mismas respuestas que el VCE y he sacado 850 por lo tanto es cierto que algunas respuestas son incorrectas. Suerte a todos.

Your company has a server named Printer1 that runs Windows Server 2008 R2. Printer1 has the Print and Document Services server role installed.
You need to reduce the number of events registered in the system log on Printer1. What should you do?

A. Open the Event Viewer console. Create a custom view for the system log. Exclude the events that are notified by Event ID 10 from the filter.
B. Open the Print Management console. Open the properties of Printer1 and clear the Log spooler information events option.
C. Open the Print Management console. Open the properties of Printer1 and clear the Show informational notifications for network printers option.
D. Open the Print Management console. Open the properties of each individual printer on Printer1 and clear the Enable advanced printing features option.

in the dumb the answer is B, It should be wrong ,cuz this option is not available in 2008r2. Does anyone know this? pls help

Has anyone that has failed the exam, gone back and received the same exam on the second attempt?

Dump 100% Valid, Passed today 850, 50 questions, no labs. Thanks

@Toni

you run winrm quickconfig on the target machine, and use wecutil on the machine you will be collecting with. winrm quickconfig is the correct answer.

Passed today 850, straight 50 questions, no labs. Studied only this dump memorized all 280 questions, all questions appeared on the exam verbatim. Thanks eddy

On the exam I, the question:
Your network contains a server named Server1 that runs a Server Core installation of Windows Server 2008 R2. The network contains a client computer named Computer1 that runs Windows 7. You need to ensure that you can collect events from Server1 on Computer1. What should you run on Server1?

A. wecutil cs
B. eventcreate /so
C. winrm quickconfig
D. net config server
is says that the answer is C, but i really beleive its A (wecutil cs) , can anybody confirm please

Hi all, can any one tell us if there are simulations in the exam, and what kind

dumps are 100% valid. scored 850. Some answers are wrong but once can easily pass.

Passed today with 820. Eddy's and Mohammad's submissions remain valid. All questions from their submissions. Some answers are probably incorrect, but the work done by the contributors to this site is fantastic. Do study the sims; had two on the exam.

Took the test today and failed it.
A lot of new questions in the exam.

firstly, thankyou very much for the effort from Mohammed and Eddy.

Heard from friend who test taken in China, seem 8-10 new questions.
consider 85% accurately on existing question set.
(not recommended for who are not that well prepared)

This dump is valid in the UK. I passed today with 760. All Questions are from this dump. 50 Questions in the exam. There may be some wrong answers still although I was unsure about 3 answers

2 Erfan from United States:
Answer is C : Increase the Refresh Interval setting in the Start of Authority (SOA) record for the zone is correct answer cuz it will make more rare updates of zone and less trafic will go through WAN-link
2 Duckie66 from Canada:
Eddy wrote if in 7-th post in comment here!
And in 3-rd post:
"Hey this is a Copy from Mohammed but i fixed 5 answers."

Hello Eddy,

Could you please revise this dump?
I've been training like a madman on this dump and have my exam this friday and realy want to make it :)

Eddy*

Hello Eddie. The questions that you listed as corrected show the same answer as on Mohammed dump. The only one with a different answer is Exam J Q:20 and the answer is changed to D. Please let us know what you corrected...much appreciated.

Took exam today and missed it with a 665. I know a lot of answers are wrong from the dump so please help out as much as possible. Came so close.

I still think the answer would be to increase the refresh interval on the DNA servers. Increasing it means that the secondary servers will request for changes/updates less often which would in turn decrese network bandwith

Can someone explain why this answer is right for this question on Exam B?

Your company has a main office and two branch offices that are connected by WAN links. The main office runs the DNS Server service on three domain controllers. The zone for your domain is configured as an Active Directory-integrated zone.

Each branch office has a single member server that hosts a secondary zone for the domain. The DNS servers in the branch offices use the main office DNS server as the DNS Master server for the zone. You need to minimize DNS zone transfer traffic over the WAN links.

What should you do?

Answer is C : Increase the Refresh Interval setting in the Start of Authority (SOA) record for the zone.

Shouldnt it be B: Decrease the Refresh Interval setting in the Start of Authority (SOA) record for the zone

I've passed the exam on Saturday. Dump is 100% valid, BUT even that I've answered ALL of the question correct, I could only get 850. So if you study this dump and take the exam, I gurantee that you can get olny 850 for maximum!

please any one answer this Question :
Your company has a server named Printer1 that runs Windows Server 2008 R2. Printer1 has the Print and Document Services server role installed.
You need to reduce the number of events registered in the system log on Printer1.
What should you do?

the answer in the dump was :
B.
Open the Print Management console. Open the properties of Printer1 and clear the Log spooler information events option.
But this option is NOT NOT avalabile in windows server 2008 R2 .
what is the correct answer ?

I passed with an 820.

All questions are valid and all on the test

730/1000 - All questions from this dump. A lot of wrong answers.

Info Question 4 Exam A:
Use the Security tab of the SNMP Service's properties to configure the communities in which the agent participates and optionally a list of hosts from which the agent accepts SNMP packets. By default, the agent accepts packets from all hosts. This presents a security risk, however, so take care to configure security settings to permit SNMP traffic only from authorized hosts.

today new dump will be available after i end my exam .. ed3oooole.

Passed today with 850. All 50 questions were on the dump. Some answers are still wrong. I got less than 100% on DNS and File Server sections. No idea which questions though.

Be carefull on the EXAM F Q:18

Your network contains a single Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 and Server2 are namespace servers for the \contoso.comDFS1 namespace.

You need to ensure that users only connect to the \contoso.comDFS1 namespace on Server1 if Server2 is unavailable.

How should you configure the \contoso.comDFS1 namespace?

In this case the correct answer is

c: From the properties of the \SERVER1DFS1 namespace servers entry, modify the advanced settings.

but on the Exam today they reversed in the Question "Server1 and Server2"

so the question was
"You need to ensure that users only connect to the \contoso.comDFS1 namespace on Server2 if Server1 is unavailable."

in this case the correct answer is

d:From the properties of the \SERVER2DFS1 namespace servers entry, modify the advanced settings.

Jiehaaaaaw
Passed the exam

The updated VCE from Eddy is the most valid one..

Failed exam with 630 today. Used an older dump. Some questions were still included. Thought I passed but was also guessing too much. Want to take the exam again Thursday. Hope this dump can make the difference. Is the data valid and correct. Your help is greatly appreciated.

what is the correct answer ??
the user can access web1 by using the url http:\web1

1- configure global names and add a host (a)
2- create cname resource record

Bob and Eddy
ANSWER A: The key to this question is that it is a AD integrated zone. Meaning that the replication is handled by AD and not conventional DNS zone transfer. AD replication is faster and more efficient as it replicates on a per property basis, so only the relevant changes are propagated. Since this is a AD integrated zone it is stored in the dnsZone container and replicated within the AD replication process. This process is the same regardless if it is a primary or stub zone.

No AD integrated Zone would be D
http://technet.microsoft.com/en-us/library/cc816794%28v=ws.10%29.aspx

EXAM F Q:18

EXAM B Q:16

EXAM J Q:20

EXAM D Q:2 (Active Directory-integrated stub zone) If it was an Primary/Secondary Zone you must Chose „D:From DNS Manager, click Transfer from Master."
The Correct Answer is A: From Active Directory Sites and Services, click Replicate Now.

EXAM C Q:23

On Question 80 on keeping the most up to date Stub Zone. Answer on Dump A. Replicate now. Correct Answer D. Transfer from Master.

Hey Eddi, please write down 5 wrong answers , it is can help us.

File Danke , Jack

Hi Eddy, could you tell us which 5 question/answer you fixed in this dump?

Just list "Exam X" and "Item XX" will do. This will help a lot

thanks in advance.

Hey this is a Copy from Mohammed but i fixed 5 answers. Now i found once more correct answer.

Exam C

Your network contains an Active Directory domain. The domain contains a file server named Server1 that runs Windows Server 2008 R2. You need to ensure that a user named User1 can back up and restore files on Server1. The solution must minimize the number of user rights assigned to User1. What should you do?

Answer in dump - B - Assign the Backup files and directories user right to User1.
Correct answer - C - Add User1 to the Backup Operators group.

HI,
Is it updated version of old dumps with correct answers ah EDDY.
Thanks.

Can you please give a description of this Dump?