Pass Your Microsoft 70-505 Exam Easy!

Just found this site after failing the test and looking for answers to the questions I got wrong. Is there a Word or PDF doc version of this someone could e-mail me? Greatly appreciated: jbjackson@verizon.net

TO ELLA, SAM (and others):
The software itself, Visual CertExam Suite is NOT FREE.
You have to buy license to view more than 5 questions.
The vce files are free but you have to have a licensed software to see all the questions.

Please stop asking why can't you only see 5 questions. That is so s~.

Hi guy, yesterday I took 70-505 exam. I got 900 points and all my question is the same like question in this dump. I think some answer is wrong. Please check answer in internet again before taking the test.
Good luck !

@Thomas & friends: Thanks you so much one more time. If u have times, please correct wrong answer in this dump for everybody. God bless you :)

To register, its asking me to pay! isn't that the case, you have to pay to register!

Because in unregistered version of Visual CertExam Suite you can see only 5 questions from a dump.

Ella is right. you can only see 5 questions on print???!!!! Why??? please respond

Hi, why did you guys erase my comments from this forum. You have to buy VCE, it only shows you 5 questions! if anyone has the pdf, can you please mail it to me ellazagar@yahoo.co.uk
thanks,

http://203.78.110.23/kookai.rar << it has 65 questions not 5 questions. maybe you have only selection a single topic. guys if you think the answer is wrong and you know the right answer, please post it instead of complaining. Thomas and others are doing their best to help us out.

hi kookai..thanks for your dump
can you help me ..? this dump belongs to C# or VB ?

Good afternoon everyone.

I failed this exam two times, scoring 685 and 695.

There are many questions in this exam that you are not talking yet.

Do you remember an issue that spoke of "MENUS File Open" and was exemplified by figures of the menu?

Thanks

@ All..Guys some of the answers in VCE are wrong. Please correct the answer then upload..

Maybe you can upload it to a file server Flo.Like hotfile,mediashare etc.

oh , you're right. I loaded it yesterday. sorry for the wrong info.

I'm getting a page not found error Flo.

To get the new dump:
Convert "http://203.78.110.23/Thomas3.rar" with "WinRAR" to a thomas.vce
Download free WinRAR.

@kookai can you share thomas3.rar with us please.We are waiting for the approval.But i think it's going to take some time.

@ kookai & friend: Nice! I will also take exam very soon.
Do you know how your answers varied?
What did you answer on the Attribute question?
Thanks

uploaded to this site
waiting admin approve
after approved please vote my vce
the answer not correct 100% but u can pass with 900/1000 score

@kookai&Thomas: Thank you!

no new question but 1 question not in my .vce file
the question about Browsable attribute
i doing new vce and pot on this site after that i will delete Thamas3.rar from my server

any new questions kookai?

pass today 866/1000 my friend pass with 900/1000
i will post my vce on this site as soon as possible

1. I can't download rar
2. vce file has only 42 Q. Is this enough to pass this exam ?

regards,
Bandu.

I got 800. Almost all questions from the exam were mentioned here. Some answers from the dump may be wrong. But anyway thanks a lot, guys.

No dude.Thats all i have.Please let us know about the result.By the way one my friends got 866 with these results.

i and my team testing the answer in vs2008
if the answer incorrect i will updated it as soon as possible.
tomorrow i will exam 70-505 at 1.30 PM in Bangkok
@Thomas, do you have other question?
may be this night not sleep T_T.

@kookai please make a new vce with this 2 questions.Thank you very much.

kookai's vce has almost all of the questions (just 2 missing)
http://203.78.110.23/Thomas2.rar
The missing questions are 2 questions send by Thomas on the 13 of january, about PrintPayroll and Print Preview dialog box.
But as Thomas wrote, the main problem is now the answers
Thanks Thomas and Kookai.
thanks to Thomas again

@huppsibubbsi

Sorry for the misunderstanding.I can only give you the questions in a word file.But don't know the answers.Isn't there anyone that would like to help us?

@ Thomas: This would be gread Thomas.
I have the same feeling, that some answers couldn't be right.

If you can arrange a full question box with the 'right' answers, this would be great.

Hi there guys.I'm out of questions by the way.I can send the old questions to a file server.But i think that it is necessary rightnow.I don't know if kookai's vce has all of the questions.But the main problem is the answers.Yeah they are ok to pass the exam but I'm pretty sure that some of them are wrong.

By the way.I also thank to my friend who has sent me the questions so that i could share them with you.

@ FLO: .. huppsibubbsi . is sending a thanks for the repeating of the lost questions ..

Thany you, danke, mile grazie, Spasibo (Спасибо) .

@ huppsibubbsi : I hope, it was a help.

question nr 3 from Thomas 13 . january

You are developing a Windows Forms Application by using the .NET Framework 3.5.

You plan to create a customized Print Preview dialog box in the application.

You need to ensure that users can preview their documents before printing.

Which two actions should you perform? (Choose two)

A) Add a PrintPreviewDialog control to the form.
B) Add a PrintPreviewControl control to the form.
C) Create and initialize a PrintDocument object on the form and then implement the PrintPage event handler.
D) Create and initialize a PrintDocument object on the form and then implement the BeginPrint event handler.
E) Set the Document property of the PrintPreviewDialog control to the PrintDocument instance that must be printed.

updated .vce file
download from http://203.78.110.23/Thomas2.rar
thanks to Thomas again

here another one from Thomas

You are developing a component by using the .NET Framework 3.5.

The component provides a method named PrintPayroll.

The component will be installed with full trust on the computer of the user.

You need to ensure that the component can print without granting additional permissions to the calling application

Which code segment should you use?

A) PrintingPermission pPermission = new PrintingPermission(PrintingPermissionLevel.SafePrinting);
pPermission.Demand();
PrintPayroll();
B) PrintingPermission pPermission = new PrintingPermission(PrintingPermissionLevel.SafePrinting);
pPermission.Assert();
PrintPayroll();
C) PrintingPermission pPermission = new PrintingPermission(PrintingPermissionLevel.DefaultPrinting);
pPermission.Demand();
PrintPayroll();
C) PrintingPermission pPermission = new PrintingPermission(PrintingPermissionLevel.DefaultPrinting);
pPermission.Assert();
PrintPayroll();

here one of the question from thomas - 13 january

You are creating a Windows Forms application using the .NET Framework 3.5

You implement the PrintPage page event for a form.

The users must be able to print the pages by using the Landscape orientation.

You need to ensure that the users can set the page settings before printing.

Which code segment should you use?

A) PrintDocument printDocument1 =new PrintDocument();
PageSetupDialog PageSetupDialog1=new PageSetupDialog();
printDocument1.DefaultPageSettings.Landscape=true;
PageSetupDialog1.ShowDialog();

B) PrintDocument printDocument1 =new PrintDocument();
PageSetupDialog PageSetupDialog1=new PageSetupDialog()|
PageSetupDialog1.PageSettings.Landscape=true;
PageSetupDialog1.Document=printDocument1;
PageSetupDialog1.ShowDialog();

C) PrintDocument printDocument1 =new PrintDocument();
PageSetupDialog PageSetupDialog1=new PageSetupDialog()|
printDocument1.DefaultPageSettings.Landscape=true;
PageSetupDialog1.Document=printDocument1;
PageSetupDialog1.ShowDialog();

D) PrintDocument printDocument1 =new PrintDocument();
PageSetupDialog PageSetupDialog1=new PageSetupDialog()|
PageSetupDialog1.PrinterSettings.DefaultPageSettings.Landscape=true;
PageSetupDialog1.Document=printDocument1;

@ Thomas:
Please can you post again the 4 Questions before of 14 of January, because they didn't appeare any more on this side.

I copied all this questions in a Word Document, and I'm going to learn it on this way. Because I recognised that in the VCE Dump of Kokai ( http://203.78.110.23/Thomas.rar) are not all questions which you worked out, some are double and some are with wrong answers.

Thanks in advance for your big help.

Hi! I'm thinking on question "You are creating a Windows Forms application by using the .Net Framework 3.5
You plan to design a composite control for the application.
You need to derive the control from a base class that supports templates.
What should you do?

"
I think that correct answer shoud be A) Control Class

"If built correctly, a UserControl can take advantage of the benefits of rich content, styles, and triggers. However, if your control inherits from UserControl, people who use your control will not be able to use a DataTemplate or ControlTemplate to customize its appearance. It is necessary to derive from the Control class or one of its derived classes (other than UserControl) to create a custom control that supports templates."
See: http://msdn.microsoft.com/en-us/library/ms745025.aspx
Do you agree?

A) - SetShowHelp
B) - Add/Remove

A)
B)

A) Insert the following code segment at line 05.

this.tabAdvancedSettings.Hide();

Insert the following code segment at line 10.

this.tabAdvancedSettings.Show();

B) Insert the following code segment at line 05.

tbcConfigurationInformation.TabPages.Remove(tabAdvancedSettings);

Insert the following code segment at line 10.

tbcConfigurationInformation.TabPages.Add(tabAdvancedSettings);

C) Insert the following code segment at line 05.

tbcConfigurationInformation.SelectTab(tabAdvancedSettings);
tbcConfigurationInformation.SelectVisibleCore(false);

Insert the following code segment at line 10.

tbcConfigurationInformation.SelectTab(tabAdvancedSettings);
tbcConfigurationInformation.SelectVisibleCore(true);

D) Insert the following code segment at line 05.

this.tabAdvancedSettings.Invalidate(false);

Insert the following code segment at line 10.

this.tabAdvancedSettings.Invalidate(true);

Question is too long so i'm sending it in 2 parts.First the question.

You are creating a Windows Forms application by using the .Net FrameWork 3.5

You create a new form named ConfigurationForm in the application.

You add the following controls to the form.

* A TabControl control named tbcConfigurationInformation along with two TabPage controls named tabGeneralInfo and tabAdvancedSettings

* A button control named btnShowAdvSettings

You add the following code segment in the form.(Line numbers are included for reference only.)

private void ConfigurationForm_Load(object sender,Eventargs e)
{
this.btnShowAdvSettings.Click += new EventHandler(btnShowAdvSettings_Click);
}

private void btnShowAdvSettings_Click(object sender,Eventargs e)
{
}

You are defining the initial configuration and behaviour of ConfigurationForm.

You need to ensure that the following requirements are met.

* The tabAdvancedSettings TabPage control is initially hidden when the Form is loaded.

* The tabAdvancedSettings TabPage control is displayed when the btnShowAdvSettings button control is clicked.

The first one is the help question.

You are creating a Windows Forms application by using the .Net Framework 3.5

You plan to display detailed help instructions for each control in the form.You create a help file.You configure a HelpProvider component on the form.

You need to display the help file for the control that is focused when the F1 key is pressed.

Which method of the HelpProvider class should you call for each control.

A) SetShowHelp

B) SetHelpString

C) SetHelpKeyword

D) SetHelpNavigator

hey guys.missed me :)

Are you ready for the tabpage question?

thanks to everyone who contributed here (specially to the main contributors Thomas and vasya. :)
I'll be taking my exam on 24. I'll let you guys know the result afterwards and hopefully help you guys here too.
It will be my 2nd take by way as I failed the 1st time (604/1000). Hopefully this time I will succeed. I also made some list of keywords of questions not included in the original vce. Most of them are already answered by Thomas, vasya and others. Here it is:
1.) BackgroundWorker1 2) TabControl 3) MenuStrip 4) Vsto 5) CompositeControl 6) Help 7) UserPreferences 8) Government 9) Elevated permission

i'm not sure for the answer on my .vce file.
the answer follow this dump.
anybody professional please correct the answer or update new question i will update .vce
thanks to Thomas again.

I pass the exam yestarday with a score of 766. I want to thank @kookai for the .vce file, and also to @Thomas that give us a lot of new questions.
The topics i had fail answers are listed below, try to figure it out what were the wrong question. I base my study on the .vce file of kookai:

- Implementing printing and reporting functionallity in a Winforms Application
- Enhancing Usability
- Deploying Windows Forms Controls
- Configuring and Deploying Applications

@ beardedman
Subscribe to RSS to see all comments.

updated vce support to woo
download at http://203.78.110.23/Thomas1.rar

Oh crap.I forgot to send the TabPage question.Maybe I'll send it tomorrow.But if someone needs it.It's add and remove the tabpage control i think.

@eddy . The questions are valid.I'm not sure about the answers.This questions are enough to pass the exam (with these answers).If you want to get a 1000,please try to answer these questions on your own and let us know about the result.

@Bobkhìn .God bless you too.If i was helpful to you (I'm also talking for my friend) ,it is enough for me.:)

@woo Thank you for your researchful answers.

@kookai. Thanks for the vce.Please update the question that woo mentioned.

And all others.Please feel free to share this file.Thank you.

Where were all the messages before January, 14th???

Vasya - Below is taken from MSDN
You can read both application-scope and user-scope settings at run time with the Properties namespace. The Properties namespace exposes all of the default settings for the project by using the Properties.Settings.Default object.
Also I have tested this in VS2008. Basically they made it easier.
http://msdn.microsoft.com/en-us/library/aa730869(v=vs.80).aspx

Hello Thomas .. Is it valid please?I have already downloaded it.Thanks in advance.

@Thomas, playpoker, kookai , vasya, and Thomas's friend: Thank all of you so much. God blesses you :)

woo, how get data from app.config by Properties.Settings.Default? they are different stores and for app.config - ConfigurationManager, i always use it

i mix question of Thomas with Clooney
please download at http://203.78.110.23/Thomas.rar
extract download file with winrar u will find Thomas.vce
i'm not sure the answer correct, i follow the answer from this dump.
sorry for my english.
thanks to Thomas

Thats all i've got folks.Maybe i'll put them together and make a dump.If i can't , I would be pleased if someone makes it.Thank you for the answers by the way.

B) Use the Properties.Settings.Default object during runtime.
Tested now in VS

My answers:
C) Use the ConfigurationManager.AppSettings object during runtime.

C) Set the WorkerReportsProgress property of backgroundWorker1 property of backGroundWorker1 to True before you attempt to report the background process.

C) Set the WorkerReportsProgress property of backgroundWorker1 property of backGroundWorker1 to True before you attempt to report the background process.

B) Create a new custom class for the control that is derived from the UserControl class.

D) Create public accesses for the properties of the BindingSource control

B and D if it was a choose two

A new one.

You are creating a Windows Forms Application by using the .NET Framework 3.5.

You plan to design a control for the application.

You need to ensure that the control meets the following requirements:

- Contains the DAtaGridView, BindingSource, and BindingNavigator controls.
- Exposes the properties of the BindingSource control.
- Protects the properties of the DataGridView and BindingNavigator controls.

What sholud you do?

A) Extend the Control class.
B) Extend the ContainerControl class.
C) Create protected accesses for each control property
D) Create public accesses for the properties of the BindingSource control.

Is it control or usercontrol.I am confused!!

Correct answer is B, an UserControl can contain both Windows Forms and WPF-controls.

B) Use the Properties.Settings.Default object during runtime.

C) Set the WorkerReportsProgress property of backgroundWorker1 property of backGroundWorker1 to True before you attempt to report the background process.


A) Create a new custom class for the control that is derived from the Control class.

I have prepared another question and still waitin for the answers.

@ Thomas.. OK..

Parag a friend is sending me the questions.And i am sending them here so that just waiting if someone answers.If you know the answers,please feel free to reply.Thanks.

You are creating a Windows Forms Application by using the .NET Framework 3.5.

You plan to design a new control that will be used on multiple forms in the app.

You need to ensure that the control meets the following req.

- It retrieves data from a MSSQL SErver 2008 database instance.
- It uses WPF classes to display data.

- It uses user-customizable actions when the control is first painted on the form.

What should you do ?

A) Create a new custom class for the control that is derived from the Control class.
B) Create a new custom class for the control that is derived from the UserControl class.
C) Create a new custom class for the control that is derived from the ContentControl class.
D) Create a new custom class for the control that is derived from the ContentPresenter class.

@ Thomas & Vasya..
Hey guys u r doing nice job..But If u have all questions then put all together and mention answer also..

and one more :)

You are creating a Windows Forms application by using the .Net Framework 3.5

You create an instance of a Backgroundworker component named backgroundWorker1 to process operations that take a long time

You discover that when the application attempts to report the progress,you receive a System.InvalidOperationException exception when executing
the backgroundWorker1.ReportProgress method.

You need to configure the BackgroundWorker component appropriately to prevent the application from generating exceptions.

What should yo do?

A) Set the Result property of the DoWorkEventArgs instance to True before you attempt to report the progress.

B) Set the CancellationPending property of backgroundWorker1 to True before you attempt to report the background process

C) Set the WorkerReportsProgress property of backgroundWorker1 property of backGroundWorker1 to True before you attempt to report the background process.

D) Report the progress of the background process in the backgroundWorker1_ProgressChanged event.

You are creating a Windows component by using the .Net Framework 3.5.

the component will be used in Microsoft Word 2007 by using a ribbon button. The component..

You find that Word 2007 becomes non-responsive during the upload. You plan to create your..

You need to ensure that the application completes the upload efficiently.

What should you do ?
You are creating a Windows Forms Application by using the .NET Framework 3.5.

Users use the application to process and approve invoices. A list of recently accessed invoices is stored in the users settings section of the App.config file.

You need to maintain the list of invoices from the last persisted state.

What should you do?

A) Use the Properties.Settings object during runtime.
B) Use the Properties.Settings.Default object during runtime.
C) Use the ConfigurationManager.AppSettings object during runtime.
D) Use the ConfigurationManager.GetSEction method during runtime.

I answer B) UserControl

You are creating a Windows Forms application by using the .Net Framework 3.5

You plan to design a composite control for the application.

You need to derive the control from a base class that supports templates.

What should you do?

A) Derive from the Control class.

B) Derive from the UserControl class.

C) Derive from the ScrollableControl class.

D) Derive from the ContainerControl class.

New questions are being prepared.Just wait pals.

I answer SetShowHelp and Add/Remove too. Add/Remove 100% right, SetShowHelp imho too.

Vasya.1)SetShowHelp
3)remove TabPage(not hide or something like that)

Am i right?

All 50 questions are fixed and one in one for all. It's current dump + all questions by Thomas + 4 additional questions

Vasya.I'll send the control questions in 20 minutes.Could you give us the correct answers if possible.And the questions i gave today.Were they helpful?

Additional questions (exclude by Thomas):
1) How show help file by press F1 (SetShowHelp, SetHelpString, SetHelpKeyword, SetHelpNavigator)
2) app.config - AppSettings
3) TabControl - add and remove TabPages
4) Control with only WPF content inherits Control or UserControl

I passed the exam! 833 Scores. Parts: Creating UI 100%, Work with Data 100%, Printing 100%, Asynchronous 100%, Deploying Applications about 90%, Deploying Controls about 70%, Enhancing Usability about 70%. May be answers for qustion about "accessibilty" isn't right.

In a hour dude.

any more questions to share thomas? :)

@ Thomas:

Good work Thomas :-) !! Until now with this 12 Questions and the old dump we should pass the exam.

But, I hope you can work out also the rest of it .. ;-) .. for getting a good
result in the examen.

Sorry that i can't help you anymore.But maybe you can give us answers after your exam.Hope to see you here after the exam.

I go, Thomas - thank you for nice help

jithin, of course, this setting need create manualy
Thomas, after 15 minutes

for "UserPreference settings "
B

option B is throwing an Error in VS :

Properties.Settings.Default does not contain defenition for Userprefences

Ok guys.Good news.Friend will be online in 30 minutes.Vasya when is your exam actually?

Sorry guys,friend is offline rightnow.I'll send new questions in 2 hours.I hope that everyone could see new questions.Thanks

Thomas, i need question about Control with WPF content, please write it

background - C

C is right question

You create an isntance of a BackgroundWorker Component named backgroundworker1.

You discover that when the application attempts to cancel the background process you get an exception from the following code segment:

backgroundworker1.CancelAsync();

You need to configure the BackgroundWorker component appropriately to prevent to application from exception.

What should you do?

A) Cancel the background process in the backgroundworker1_DoWork event.

B) Set the IsBusy property og backgroundworker1 to True before you attempt to cancel.

C) Set the WorkerSupportsCancellation property of backgroundworker1 to true before the code.

D) Set the DoWorkEventArgs Cancel property to true.

playpoker, no! AppSettings - is app.config, other applications can read it

Thomas, please write questions about HelpProvider and Control with WPF

B + E of course

Ok my bad was just confused with the exception:)

A new one then

You discover that a particular group of settings named UserPreferences changes.

You need to store the UserPreference settings to prevent affecting other applications.

Which two actions should you perform? ( Choose Two )

A) Use the Properties.USerPreferences object

B) Use the Properties.Settings.Default.Userprefences object.

C) Use the ConfigurationManager.AppSettings object during runtime.

D) Create the settings by using Application scope.

E) Create the settings by using User scope.

Checked in VS
Variant A

try
{
XmlDocument xml = new XmlDocument();
var lvl1 = xml.CreateElement("Level1");
var lvl2 = xml.CreateElement("Level2");
lvl2.Value = "some value";
lvl1.AppendChild(lvl2);
xml.AppendChild(lvl1);
MessageBox.Show(xml.OuterXml);
}
catch
{
}

I caught InvalidOperationException on set Value property but InnerText - correct