Pass Your Microsoft 70-664 Exam Easy!

Squeaked by with a 700, thought I had done much better, I was getting 100% on the practice tests. Now on to 665

@beraa i think the answer of this question is A and D

4 Digit Extension
Starting Digit is 3
Lenght Exactly 4
Digit to add is +35320911
Pattern Match is ^(3d)$
Translation Ruleis +35320911$1

refering to this link
http://designinglync.blogspot.com/2011/05/lync-dial-plans-and-normalization-rules.html

the first raw in the second table
Regards,

I agree on
B+D
Example
+142555512$1 ^12(d{2})$. match on nr 12 add 2 numbers
dial 1280 -> +142555512 + 80 translated to +14255551280

Hi Spark

1) Your network has Lync Server 2010 deployed. You deploy a Mediation Server, and then you configure a voice route that uses a SIP trunk. You create a test user named User1. You enable Enterprise Voice for User1. You need to verify that when User1 initiates calls to external telephone numbers, the calls are routed through the SIP trunk. What should you run?

C. From the Lync server, use the Lync Logging Tool and analyze the trace with Snooper
D. From the Lync server, use the Lync Control Panel to test voice routing in the Voice Routing tab

I answered C. It was like 'From the Lync server, use the Lync Logging Tool' (no comment on Snooper).

The correct answer is D - Look in the Lync control panel and you will se :)

2) Your company has a telephone number range of (425) 555-1200 to (425) 555-1299. The country code is 1. The network has Lync Server 2010 deployed. You need to create a normalization rule for four-digit extension dialing that normalizes extensions to E.164 format. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

A. Set the translation rule to +1425555$1.
B. Set the translation rule to +142555512$1.
C. Set the translation pattern to match ^4(d)$.
D. Set the translation pattern to match A 12(d)$.

That is B and D - Try to build it in the Lync control panel and you will see :) The A is a typing error

Oh, there was one completely different one. Question itself is same but answers are not same with the dump.

4) Your network has Lync Server 2010 deployed. You deploy a Mediation Server, and then you configure a voice route that uses a SIP trunk. You create a test user named User1. You enable Enterprise Voice for User1. You need to verify that when User1 initiates calls to external telephone numbers, the calls are routed through the SIP trunk. What should you run?

This question's answers were all about 'Test-XXXXXX' things, no sentence at all.

3) File store question

Well, overall, I think recent dumps are still valid but some of answers MUST be wrong while we can't easily find them. Just for covering passing score (700), it is safe for you but need to study hard on 'what is officially known answers'.

Good luck all and see you soon again at 665. ;)

1) Your network has Lync Server 2010 deployed. You deploy a Mediation Server, and then you configure a voice route that uses a SIP trunk. You create a test user named User1. You enable Enterprise Voice for User1. You need to verify that when User1 initiates calls to external telephone numbers, the calls are routed through the SIP trunk. What should you run?

C. From the Lync server, use the Lync Logging Tool and analyze the trace with Snooper
D. From the Lync server, use the Lync Control Panel to test voice routing in the Voice Routing tab

I answered C. It was like 'From the Lync server, use the Lync Logging Tool' (no comment on Snooper).

2) Your company has a telephone number range of (425) 555-1200 to (425) 555-1299. The country code is 1. The network has Lync Server 2010 deployed. You need to create a normalization rule for four-digit extension dialing that normalizes extensions to E.164 format. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

A. Set the translation rule to +1425555$1.
B. Set the translation rule to +142555512$1.
C. Set the translation pattern to match ^4(d{12})$.
D. Set the translation pattern to match A 12(d{2})$.

I think I missed this one. There was no 'A' in D and no '^' in C. Answer must be B / C but I picked B / D.

Hi, all.

Just passed with 742. Let me update you again soon.

Doing the exam Friday this week - will repost back :) Any news from Australia?

Not sure on following question;

Your network contains a SIP domain named contoso.com. Contoso.com has Microsoft Office Communications Server 2007 deployed.
AU client computers run Windows XP Service Pack 2 (SP2) and Microsoft Office Communicator 2007. You deploy Lync Server 2010 on the network. You need to ensure that all of the client computers can log on to Lync Server 2010 after their accounts are
moved to the new Lync pool. What should you do?

A. Deploy a Lync Server 2010 Director.
B. Modify the Lync Server Client Version Policy.
C. Decommission Office Communications Server 2007.
D. Install Microsoft Lync 2010 on all of the client computers.

B or D? I'd like to pick B though.

Rob / It's tomorrow 10:30 AM Sydney time. Will update you. :)

Call Park / Thanks. Will use that 'File Store' answer. ;)

SparkSSJ ---

For the below question I used the answer

Update file store.

This was going by http://technet.microsoft.com/en-us/library/gg412864.aspx

3) Your network has a Lync Server 2010 infrastructure that contains IP phones. You need to ensure that the IP phones can receive firmware updates. What should you do?

B. Create a new collection of Client Version Configuration settings.

@SparkSSJ - How did it go ? Which dump did you use finally ?

5) Your network is configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that all remote users can download the address book by using Microsoft Lync 2010. Which TCP ports should you open on Firewall2?
Exhibit:

D. 4443 and 8080

http://technet.microsoft.com/en-us/library/gg425891.aspx

3) Your network has a Lync Server 2010 infrastructure that contains IP phones. You need to ensure that the IP phones can receive firmware updates. What should you do?

B. Create a new collection of Client Version Configuration settings.

4) Your network has a Lync Server 2010 infrastructure that uses Enterprise Voice. You need to enable call park for Enterprise Voice users.
You configure a call park number range. What should you do next?

A. From the Lync Server 2010 Control Panel, edit the Voice Policy.

---------------------------------
Let me know what you think (or at least I will have this exam tomorrow so can find out myself by the score). Cheers!

All right, guys. I have checked myself and will answer like the following ;

1) Your network has Lync Server 2010 deployed. Several users report that they are unable to add more contacts to their Contacts lists.
You need to verify whether the users' Contacts lists reached their limit. What should you do?

C. From the Lync Server Management Shell, run the Get-CsUser cmdlet.
-> although Get-CsUserServicesConfiguration is the correct one

2) Your network contains a SIP domain named contoso.com. Contoso.com has Microsoft Office Communications Server 2007 deployed.
AU client computers run Windows XP Service Pack 2 (SP2) and Microsoft Office Communicator 2007. You deploy Lync Server 2010 on the network. You need to ensure that all of the client computers can log on to Lync Server 2010 after their accounts are moved to the new Lync pool. What should you do?

B. Modify the Lync Server Client Version Policy.

Thanks so much, Call Park. Tomorrow, everything(?) will be revealed. Seems like you are correct since lots of people say new one can get around 700 (just meet!) and you got 800.

SparkSSJ -- I ended up going to the old exam because I felt the new ones had to many issues. I just got over 800.

Good Example is the call park question in the example I used the answer is correct.

Call Park / Compared the one you used vs other recent ones ; some of answers are different. I thin around 4~5 of them. Not sure which one I will follow. Just wish they don't appear. :)

Call Park / How nice! Proud of you. Can I ask what score you got? I am having 664 this Wednesday.

I passed today :)

I used this http://www.examcollection.com/microsoft/Microsoft.certkey.70-664.v2011-07-22.by.Sam.75q.vce.file.html

only a few mistakes.

For the Call Park question I answered using

A. From Lync Server 2010 Control Panel, Edit the voice policy

Seems like exam A, Q17 answer is only changed (compared all of them). Let me know if I am wrong. :)

What do you think the answer is to the Call park question.


You need to enable call park for Enterprise Voice users
you configurate a call park number range

what should you do next ?

A. From Lync Server 2010 Control Panel, Edit the voice policy
C. From the Lync Management shell, run the set-CsCpsConfiguration cmdlet

The example dump says it C but I am thinking its A

As set-CsCpsConfiguration is a Optional setting

Please check http://www.microsoft.com/en-us/download/confirmation.aspx?id=1557

Failed with a 665 today. So close. Missed most in configuration enterprise voice and configuring for external access.

One question not seen before . cant for the life of me remember what it was.

Exam C,Q5 - didn't say "need to assign test users to pool". It just asked What to do next.

Oh my. I just downloaded new version and asking for license!!!

I am taking this 664 next Wednesday and thanks for uploading this. I have studied previous three versions (although they are almost identical) but this new one may give me better score. :)

Will work out and check the difference then write something sooner or later.

The only question that is different from the 2012-04-26 version is question B12 (?)

Download the new version and it will open for you without a license.I tried and it worked for me.

hi uc-uk,

could you please upload this dump for older version of vce. I can not open this dump with my vce v2.8.1

thanks

Ok much better than what I had!! Well done so you really used this vce file for it? If that's the case I'm willing to go for it again asp.Tnx again!!

I got 865

Did you pass the exam UC-UK? If so what was your score? Tnx!

About 6 questions have been updated

All errors? Only one answer is different from the previous.

All error have been corrected in this version.