Pass Your Microsoft 70-341 Exam Easy!

I did the exam today. Passed with score 769. Replies to questions were in various order :)

Anyone post the latest dump

Did the exam and failed 637.

Still valid. Passed with 7xx. Used this dump and sussex exam K and ocean and also check the answered from @eheh

No other answered changed.

1 new question not in this dump:

Rin new-mailboxdatabase -name rdb -server 'ex4'-logfolderpath f:\rdb -edbfilepath f:\rdb\db1.edb -recovery, and them mount the RDB

Delete the checkpoint file in F:\RDB, and then run eseutil.exe /r /e00 /a

Run New-MailboxRestoreRequest to restore the email message of User1

but not sure about the answer this is my second shot

Still valid. Passed with 742. Used only this dump and check de answered from @eheh

No other answered changed.

1 new question not in this dump:

Box1
Rin new-mailboxdatabase -name rdb -server 'ex4'-logfolderpath f:\rdb -edbfilepath f:\rdb\db1.edb -recovery, and them mount the RDB

Box2
Delete the checkpoint file in F:\RDB, and then run eseutil.exe /r /e00 /a

Box3

Run New-MailboxRestoreRequest to restore the email message of User1

good morning... from Colombia still valid I passed today... thanks Bless

Passed exam in the Perú on Monday 1/20 with a score of 700 on my second attempt :D!!

I passed the Exam today with a scoring point of 7XX.It was tough I must tell you. I had to also use my experience and not just the dumps.

Failed to times with 680 points, today was different. Same questions. Same answers except one.
Layer 4 and layer 7. One new question. And ges what, 914 points. I don’t know what wend wrong the first two times. look likes you get 250 points for the loadbalance question?

@Ravi, no, some of those answers are wrong. See some corrections i identified in the Mo "version".

Passed it this week with a 9XX.

Contoso Q1 is incorrect.
Answer should be A not C
A layer 4 switch can only detect if a CAS server is down, not if one of the services on the CAS server is down.
A layer 4 switch will result in lower hardware cost when comapred with a layer 7 switch which is whatw as required in previous exchange versions.

See http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx

of note:
WNLB doesn't detect service outages. WNLB only detects server outages by IP address
and
With Layer 4 load balancing, the requests are distributed at the transport layer. The load balancing solution distributes requests from the client, which is aware of a single IP address

i.e. a layer 4 hardware load balancer is extremly similair to wnlb. Main differnce between teh 2 is that hardware can be implemented in an environemnt where dags are being used and CAS and mailbox serevrs are implemenetd on the same server.

As for few others that are often discussed:

Misc1 : Q3 - B
Misc1 : Q4 - B
Misc1 : Q12 - B (in Explanation it states, that there is no such cmdlet in Ex2013, there is - http://technet.microsoft.com/en-us/library/aa998327%28v=exchg.150%29.aspx
Misc1 : Q18 - BD
Incorrect : Q6 - D
Incorrect : Q7 - C (what's missing in the question are cost on the links between AD sites, it should be 3 AD sites all connected to each other with cost 10).
Proseware : Q2 - AB
Exam K : Q4 - C
Exam K : Q8 - BCE
Exam K : Q11 - D

And I didn't have that one on the exam but i also changed answer for NewQuestions : Q1 and Exam K : Q1 (those are duplicates) for Set-MailboxCalendarConfiguration as you have to set working hours for the room mailbox, otherwise they won't be visible in the room finder.

I passed recently with a little bit over 800. The important thing is i got 100% for design and manage infrastructure. For Exam K Q2 i picked Dynamically Expanding VHD's and Backups from the Virtual Machine.

For the Exam K: Q9 (not sure if it's design) i answered Set-WorkloadPolicy.

For A-Datum : Q3 i marked Layer 4 Load Balancer and Layer 7 Load Balancer.

Next - Litware: Q4 - ch-ex2.litwareinc.com, ch-ex3.litwareinc.com, client.litwareinc.com and client.litwareinc.com again.

Litware: Q5 - Create a root distributiongroup -> Run the Set-organizationConfig -> Run the Set-Group

Fabrikam: Q1 - Dagnet1 - only ReplicationEnabled, Dagnet2 only MapiAccessEnabled

Fabrikam: Q8 - From EDGE1, run the exportedgeconfig.ps1 -> From EDGE2, run the importedgeconfig.ps1 -> Create a new Edge Subscription to EDGE2

Fabrikam: Q9 - EX1,EX2,EX3 and again EX1,EX2,EX3

Incorrect: Q2 - Install the Mailbox server role -> Run the Install-AntispamAgents.ps1 -> Run the Restart-Service MSExchangeTransport

Incorrect: Q3 - Run the $Data=Get-Content... -> Run the New-App -> Run the Set-App

Misc2 : Q10 - setup /preparead for contoso.com, setup /preparedomain for child.contoso.com

Misc2 : Q15 - Install-windowsfeature rsat-adds -> setup /preparead -> setup /preparedomain

Misc1 : Q23 - Set-AdSiteLink

Misc1 : Q26 - Run setup and specify /newprovionedserver: Server5 and Add Temp1 to the Delegated Setup management role group

I know few of these, are quite easy, but if you can choose which of these are design and manage infrastructure you will get few 100% ones and never hesitate about them again.

PASSED today with 742 - This is what I did:

1) Found webinars for Core Solutions MS training.
2) Read whole book.
3) got Anonymous dump and edited all questions to right answers according to technet and book
4) Win....

Exam is completely doable if you study and know what you are doing and answering! Must learn and edit answers but all questions are VALID !!!

Any news ?

Failed yesterday with 668 in Germany. No new questions. I am going to follow Booga and check some questions, will post the results here.

These are the right answers let me know if its right:

http://www.mcseanswers.com/latest-mcse-70-341-real-exam-download-81-90.html

Thanks

I failed just now with a score of 591, thw questions are all there, the answers are WRONG.

I just tried this test for the second time and I have failed...
they are lots of new question and new names!
Could someone help with the new set of question please.
Thank you all.

go to the other dump thread for my postings if anyone's interested.

Failed the exam...
Corrected several wrong answers, used the MAXBOX screenshots, but failed anyways, plus there are several new questions I had not seen before.
and btw... passguide material is no good.
We need to build a better VCE file

Micellanous Incorrect Q1.

Exchange 2k13 don't user the public folder database. The correct answer is detailed here:
http://technet.microsoft.com/en-us/library/jj651147(v=exchg.150).aspx

I'm taking the time to go through this dump and the one from Sussex. I'm also going through the ones MAXBOX posted in his zip file. I'm taking the test next Tuesday. That being said, I'm researching each question I come across that I don't agree with and composing a list. I've already found some that are indeed incorrect. I'll post up some results later on. Hopefully we can create a dump for this exam that will really help us all out. However, I agree with those that say that you can't just study the dumps and expect to pass. Know your material and why the answers are correct.

Passed scored 700 on 30 of Dec,2013... Consider valid and 3 new question... study Amy and Sussey drum and get more study material... Have someone pls help to correct the answer.

What God decided that happened Exactly.. I have failed in this exam. It seems negative marks applied in results.

Has anyone looked at MAXBOX from United States -
update new question

http://www.4shared.com/zip/GAug6PtF/70-341.html?

there seems to be a lot of corrected questions. what's everyone's thoughts?

Exam K, Q53. incorrect answer:
http://technet.microsoft.com/it-it/library/bb123543(v=exchg.141).aspx

Set-SendConnector DomainSecureEnabled
no tlsdomainparameter

Failed with 668, My results show that all sections were 80-90% correct apart from Plan, install conf Client Access which was about 75% full, such a shame! I used Sussex dump only and memorised all questions, reproducing answers verbatim. The people who have passed have either diligently done their homework and should be commended or have been lucky enough to get the questions which have correct answers. I will retake at some point, I am just so lazy / busy to go through and find the stupid M$ correct procedure for everything! I hope some kind soul will produce a better dump or they keep plugging away with corrected answers in the forum. Thanks for all your help guys.

Ocean, Can you send me your email address to rudtra at gmail.com

i think we can help each other out.

From Malaysia. This dump consider still Valid.
Passed with 7xx at December 18, 2013.

You have an Exchange Server 2013 organization that contains a server named EX1.
You have a user named Used in the marketing department.
You need to prevent User1 from submitting more than 50 email messages per minute to the Exchange Server organization by using Microsoft Outlook.
Which three commands should you run?
To answer, move the three appropriate commands from the list of commands to the answer area and arrange them in the correct order.
new-workloadpolicy -workloadtype transport 50
$b = get-throttlingpolicy limits
new-throttlingpolicy limits -recipientratelimit 50
new-throttlingpolicy limits -messageratelimit 50
set-mailbox -identity userl -recipientlimits 50
set-mailbox -identity userl -throttlingpolicy $b
set-transportseryer -identity exl - maxoutboundconnections $b

HI , I have given paper yesterday and got 675 numbers , thus not passed the exam . Though i tried to submitted same answers given in this dump BUT I belive that some answers provided in this dump are wrong. there were total 52 questions in the paper all questions are included in this dump. sorting of answers also changed in the exam . I have chance of retake , if some one has an idea of wrong answers of this dump , then please let me know , also i am looking for the corrected answers . Please help me . my email address is asd990@hotmail.com

Hi Guys,

Me i did the exam for 2nd time and scored 668.
This exam is just a pain in the ***
It is okay for someone else to upload my content, as there are corrected answers in it for the rest of us.

I looked up the doubtful questions in technet and corrected where needed which i saved as my own dump (and shared with you guys).

It seems however this is so hard even that did not help...

Passed exam in the US on Friday 12/20 with a score of 742 on my second attempt. This is NOT an easy exam. Used this dump plus my home lab to install/configure the product. Just about all of the questions were from this dump. I spent a lot of time researching information on technet, MSExchange.org, etc., watching a Train Signal video course, and working in my lab yet still scored in the 700s. Again, not an easy exam by any means. Good luck and study hard.

Failed yesterday with 684.
This is one though exam. This dump is just lacking some of the right answers which makes it quite hard.

Passed with 746 in the USA. Dump is valid. No new questions. I chosed the same answers as dump except these questions:

- Exam K, Q4: What should you do to ensure that the email messages are delivered to adatum.com?
Dump says option C. "Assign the new certificate to the SMTP service". I selected option B. "Send the new certificate to the administrator at adatum.com"

- Exam K, Q5: Three actions for enabling mutual TLS with adatum.com?
Dump says ADF. I selected CEF:
C. "New-Send Connector with domainsecureenabled parameter": It is required for Mutual TLS. This parameter is preferred instead of "tlsdomain". Not "tlsdomain" parameter because if you set tlsdomain, you need to change "TLSAuthLevel" and "DNSRoutingEnabled" too. These are not mentioned in the question and answers. http://technet.microsoft.com/en-us/library/aa998936(v=exchg.150).aspx
E. "Set-TransportConfig tlssenddomainsecurelist adatum.com": In order to trust adatum.com. Not contoso.com
F. "Install a certificate, assign to SMTP service"

- Topic 4, A Datum, Q3: Load balancing based on specific URL.
Dump says Layer 7 LB. I selected Layer 4 and Layer 7 LB

- Misc1, Q21 (the same with Misc new questions Q4): Which tool you use to analyze user's issue with Outlook Anywhere?
Dump says "Exchange Remote Connection Analyzer" but this option wasn't in the exam. I selected "Outlook" but not sure if it was correct one. It might be "Exchange RPC Extractor". This is a tool that you can analyze the data goes through the network between client and server.

Hi Thanks to everyone...Today again I wrote...& got 8XX... I selected both L4 & L7 in load balancer Question. Between New-MailboxRestore and Set-Mailbox I selected New-MailboxRestore in one question. I put New-mailbox 1st for the following
1. Run the New-Mailbox cmdlet
2. Run the New-ManagementRole -Parent
MyContactInformation -Name Role1
3. Run the Remove-ManagementRoleEntry
Role1 Set-User command
4. Run the Add-ManagementRoleEntry Role1Set-User
-Parameters Office, Homephone
5. Run the New-RoleAssignmentPolicy -Name Policy1
-Roles MyBaseOptions, Role1,
MyVoiceMail, MyTextMessages, MyTeamMailboxes,
MyMarketPlaceApps, MyDistributionGroupMembership

For error code 5.7.3 I selected RejectMessageAdvancedStatus code

I also did some digging and changed few answers...Thanks for suggestions specially to DNS53,Ocean,Satchmo,Sussex for sharing their valuable input. Cheers to all :)

Passed 700 with sussex and self study of all questions...

Hi today I wrote the exam...Got 6XX...
I got 1 question on recovering user1 mails for last 20 days using esutil. Lag copy was set for 20 days. I wrote in following order 1.Run esutil /r 2.New-MailboxDatabase -Recovery -Name RDB -Server SRV -EdbFilePath e:\lagged_mdb\mdb.edb -LogFolderPath e:\lagged_mdb and Mount the Database(http://ficility.net/2013/07/10/exchange-one-option-to-restore-data-from-lagged-database-copy/) 3.New-MailboxRestoreRequest

There was one more new question Disabling Anti-spam without affecting anti spam update. I was confused between Disable-Antimalwarescanning.ps1 and Set-MalwareFilteringServer, I guess Set-MalwareFilteringServer will be the answer(http://technet.microsoft.com/en-us/library/jj150526%28v=exchg.150%29.aspx)

Thanks

Used this dump - got a 700 passing score - 3/4 of material from this dump was on the test -the other 1/4, I had to rely on my training (yes, it would be beneficial to understand this material before you take the test). Not an easy test - know your stuff

any one have given this paper
plz reply me at riaziub@yahoo.com thanks

anyone know what questions are wrong? or perhaps the known answers to the ones that are? or if they even know what the wording modifications are? Similarily for the 70-342.

If so I will make the corrections to them and repost, I'm being required to take this test for my job. I do not feel comfortable taking this test when all the study guides are marked 1 or less stars everywhere I see.

Anyone tried this dump yet?

Can you help?

Please email to ama82_sx@hotmail.com..

Passed with 700

Passed this friday with 742. Only used the dump from Ocean.
there are no rooms for mistakes. know your stuff.

failed today with 686...almost all question from this dumps, but a lot of errors...

Failed 637

No any one has dump with corrected answers?

Failled with 653 today...
1 or 2 new questions

Merhaba Murat,

neticeleri bana mail olarak gönderebilirmisin ?
mailmisch@gmx.net

Can you send me the result with email

Thanks

Passed today with exactly 700! :D

Thank you, Amy! Some answers are indeed changed and had better explanations, but 20-30 % of the questions in this dump still need correction and I changed 2-3 answers myself while taking the exam.

So, best of luck to all you guys! Take care!

it is not valid. same with others. quesitons are same but answers are wrong.

Hi ,what changes have been made in this dump?

Anyone tried this dump yet?

With corrected answers?

is it good? :) any feedback?

With corrected answers?

After a quick look this dump is the same as Ocean's one. Why do you upload something with the same content?

thanks

I will join the exam at 7 PM with this dumb. i will share the result