Pass Your Microsoft 70-412 Exam Easy!

Q1: a previous administrator implemented a proof of concept installation or ADRMS on a server named server1.
after the proof of concept was complete, the active directory rights management services server role was removed.
you attempt to deploy ad rms.
during the configuration of ad rms, you receive an error message indicating existing ad rms scp found.
you need to ensure that clients will only attempt to establish connections to the new ad rms deployment. what should you do?
a: from dns remove the records for server1.
b: from active directory remove the scp.
c: from dns,increase the priority of the dns records for the new deployment of ad rms.
d: from active directory remove the computer object for server1.


ANSWER: B

If anyone has the latest PDF they can send me that would be great. andy4689@gmail.com

Hey guys

you can take 74-409 alternative to 412,it still valid in examcollection and it just 99Q, and if you have 410,411&409 then you earn two certificate mcsa and server virtualization

good luck

could someone please send me the pdf with the new 21 questions. my mail: eksrolf@gmail.com . ore is there an other site that have these?

i really need it. failed twice around 650+- hard witout those new ones..

thanks in advance

please guys if anyone can send me a valid dump thank you in advance this is my email kaiser_2008@hotmail.fr

can someone send me valid dump pdf please jeremy_liong@yahoo.com

thank you.

Hi, can someone please send me the dump with the new questions to acelera @ gmail . com

thanks

Q1: a previous administrator implemented a proof of concept installation or ADRMS on a server named server1.
after the proof of concept was complete, the active directory rights management services server role was removed.
you attempt to deploy ad rms.
during the configuration of ad rms, you receive an error message indicating existing ad rms scp found.
you need to ensure that clients will only attempt to establish connections to the new ad rms deployment. what should you do?
a: from dns remove the records for server1.
b: from active directory remove the scp.
c: from dns,increase the priority of the dns records for the new deployment of ad rms.
d: from active directory remove the computer object for server1.

Hey, could someone please send the valid pdf to tobintucker@trash-mail.com?

Thanks!

Please could someone send me an updated PDF to vigneta@hotmail.co.uk

Would appreciate it very much. Thanks! :-)

Can someone please send me the latest dump/pdf to ant1loop@hotmail.com!
Thanks

Mahmoud please send me those PDFs i am writing on Monday please help

Hello Kim/Mohammed, I hope you are fine!

Could you please send these new questions for us please??

Thank you very much.

All the best!

Sergio



sergioabcarlos@hotmail.com

Many thanks to Sonya for providing me the updated and rectified new questions(21 + 11more).I really appreciate his efforts to help others.

Can someone send a valid pdf herbertzehou@yahoo.fr. Please Thank you

Mohammed or raja please provide pdf valids.Really appreciate your help.
My email is jealheca@gmail.com

Can someone send a valid pdf assaybuwa@gmail.com. Please Thank you

Mohammed, please provide those 21 new questions.Really appreciate your help.I need it as I have sit for this exam after 2 days. Please Help!
My email ID is goodgodgrace11@gmail.com

send the latest dump yungstav1@yahoo.com

Can anyone send the latest pdt updated for this exam as I have a second shot and i believe that questions are updated
Thanks in advance .

This dump are some ones posted here are not valid. Could you please someone send to me the last valid one to frremunini@gmail.com.

Thanks in advanced,
Flavio

This vce it's valid?
Can anyone send me the last dump to my mail nandosal@gmail.com?
Thanks

Can somebody please send me the latest dump or PDF to robertman28@hotmail.com

thanks to raja and valid for the pdf files
passed to day with valid pdf only

Can someone send the latest PDF to dariovilla976@gmail.com?

Please can you send me the latest dump file
to ach_system@hotmail.com

Please guys, send me the latest file labstest@outlook.com

Appreciate if someone could send me the updated questions to ksahid@gmail.com

Please help, send latest 70-412 dumps to ford2446@yahoo.com

Can somebody please send me the latest dump to aka_@live.nl?

HiGuys, Please send me updated dumps at sultan.afg@gmail.com, Thanks in Advance.

Can any kind person send me the latest questions or the PDF to igooneh@yahoo.com.au
Planing to sit for the test in two weeks.

Hi guys, next Friday I will have my secnd shot for 412 and I will upload some new questions to this foro.

Please, someone can send me new questions or one pdf ?¿?¿

iblasco.asir@gmail.com

many thanks

guys please help 70-412 send to me angelobaby91@hotmail.com

can somebody please send me the latest dump rusty725@mail.ru

Can anybody send me the new dump? vladimirbonilla@hotmail.com

Please send a copy of latest PDF to egoossens@planet.nl

Thanks

please help 412 angelobaby91@hotmail.com

pls send to me latest file, pls help prsam96@yahoo.com

Please send dump valid to cool_mis@hotmail.co.th.
thank you

Today (18/09) i did the exam (second shot) and i passed it. Questions from this dump and Sonya. No questions about azure, no new questions.
Good luck to all.

please send me an updated dump... my email is: riscknet@outlook.com

can anyone help me out and sent the updated pdf?
amir_magdy@ymail.com

please someone has the new dump ? please send me.. dumpcertifica@gmail.com

can anyone help me out and sent the updated pdf?
dhr-kraakman@live.nl
many thansk.

Please may anyone send me a valid dump for 412 at certexamza@gmail.com
Much appreciated!

pls send to me latest files

pls send to me if you have latest questions
thanks

Hi, someone can send me latest dump please.

Thank you

Anyone who's going to test anytime soon...contact me on my email address: keabetswebashimani@gmail.com, I can help out.

Hi

Can anyone send me the latest 70-412 dump.
Thank you in advance!!!

PLS need valid dump mail:aboali1eng@gmail.com

Hello, it's possible to send me the new dump to gransheva@hotmail.com ? many thanks !!

Thanks bodabo from United Arab Emirates sending me the new PDF. I haven't take my second shot. But in the pdf I do see some questions I saw from my first test which is from 2 months ago. Will study this one. And I am just wondering if we can contact aiotestking just post this on that site so we all can discuss the questions.

Hi, someone can send me latest dump please.
I've passed it yesterday and failed.
Thank you

anyone can send me latest dump and any discussion question 412 website email: jeremy_liong@yahoo.com

Thank you

Help guys

question:your network contains one active directory domain.the domain contains the servers configured as shown in the following table.
server1 domain controllers dns server
server2 domain controllers dns server
server3 dns server server1 hasthe zones shown in the following
table:
zone name zone type Is autocreated
Is dsintegrated Is reverselookupzone Issigned

adatum.com primary false false false false
contoso.com primary false true false false
litwareinc.com secondary false true false false

server3 has the following output:
zone name zone type Isautocreated
Isdsintegrated Isreverselookupzone Issigned

contoso.com secondary false true false false
litwareinc.com primary false true false false

use the drop down list must select trhe answer
choice that completes each assignment.
---you can protect [answer choice] by using dnssec:
only adatum.com
only contoso.com
only litwareinc.com
only contoso.com and adatum.com
contoso.com,adatum.com and litwareinc.com
---on server1,you configure permissions for the contoso.com zone.the permission will be efficitive

on [answer choice]:
server1 only
server1 and server2 only
server1 and server3 only
server1,server2 and server3

I used this file from ROD, the questions posted in the posts here and the 70-417, online study materials. Passed today with 800/1000.

Passed yesterday with ROD and the questions posted in the comments. Make sure you validate the answers though.

Hello,

Please someone has updated that the last days have passed exam 70-412 .

send to my email godicaes@gmail.com

Thank you.

i have valid dump 7th Sep 393 Qs which i passed from yesterday, however many wrong answers so be careful but all questions are valid. whoever needs send to this mail and i will send it back pdf file, cheerz
vvvdumps@gmail.com

Examinator anyluck in finding 70-412 346 updated 08-august 2015?

There is no up to date PDF or dump that gives any more questions than those in the comments below.

We need people to list more questions they remember for the recent exam.

Why you don't upload the file somewhere and send us the link.
This is better.

Please guys help me with 70-412 dumps send it to. Khorommbitendani6@gmail.com

Passed today with 780, it is important that you study the CBT nuggets as well as the RODS question and the new questions mentioned in the comments. This was my second shot, I had many really hard new questions in my first shot which are not mentioned above. So you could be unlucky...

Anybody have PDF File With New Questions?
Please Send to my. ronen1301@gmail.com.

Send throwawayerik@mailinator.com the newest dump if anyone has

Please guys help me with 70-412 dumps ROD

Just pass the exam 70-412. It was a difficult one becasue alot of new questions. Any help needed contact me at rajahamza89@gmail.com

Anyone please, send me the pdf file for 70-412.
jordi.msc@outlook.co.id

Thanks

tahaelnuba@hotmail.com - i have last dump for 410 mohamed if you want that

Nylez, you can't pass with the questions below. There are also different questions than this ones. (10+ more new)

@ Daan, I'm going next Tuesday. Which questions did you got? Are they in the comments below? Hopefully you can help me a bit with providing some new questions? Is it a lot of AD Replication?

Thanks for the help!

Guys Please Help: You have DHCP server named Server1 that runs Windows Server 2012 R2.
Server1 has two scope production and development.
Currently, all DHCP clients register their host name in a dns zone named contoso.com.
You need to ensure that only the clients that obtain an ip address from the development scope,register their host name in a dns zone named dev.contoso.com.
What should you do?
A. Modify the advanced settings of the dhcp server.
B. Run the set-dhcpserver4scope cmdlet.
C. Modify the dns settings of the development scope.
D. Run the add-dhcpserver4policy cmdlet.

Answer is C
You just modify the scope's DNS properties, not the server's advanced settings (this would apply to all scopes). Both PowerShell cmdlets are not applicable. The cmdlet "Set-DhcpServerv4OptionValue" would work in this scenario - which is not an available answer.

Guys Please Help: You have DHCP server named Server1 that runs Windows Server 2012 R2.
Server1 has two scope production and development.
Currently, all DHCP clients register their host name in a dns zone named contoso.com.
You need to ensure that only the clients that obtain an ip address from the development scope,register their host name in a dns zone named dev.contoso.com.
What should you do?
A. Modify the advanced settings of the dhcp server.
B. Run the set-dhcpserver4scope cmdlet.
C. Modify the dns settings of the development scope.
D. Run the add-dhcpserver4policy cmdlet.

Answer is A
https://technet.microsoft.com/nl-nl/library/Cc757682(v=WS.10).aspx

Use scope-level options for most options that clients are assigned. Setting options at the scope level allows you to take scope-related differences into account, such as different client needs or the use of a different DNS server from other scopes in the network.

Question, nobody has the extended version to build exams?

Guys Please Help: You have DHCP server named Server1 that runs Windows Server 2012 R2.
Server1 has two scope production and development.
Currently, all DHCP clients register their host name in a dns zone named contoso.com.
You need to ensure that only the clients that obtain an ip address from the development scope,register their host name in a dns zone named dev.contoso.com.
What should you do?
A. Modify the advanced settings of the dhcp server.
B. Run the set-dhcpserver4scope cmdlet.
C. Modify the dns settings of the development scope.
D. Run the add-dhcpserver4policy cmdlet.

>>>>>>>>>>Help?<<<<<<<<<<

9 question:your network contains one active directory domain.the domain contains the servers configured as shown in the following table.

server1 domain controllers
dns server

server2 domain controllers
dns server

server3 dns server


server1 hasthe zones shown in the following table:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

adatum.com primary false false false false
contoso.com primary false true false false
litwareinc.com secondary false true false false
Please find answer.
thank you

server3 has the following output:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

contoso.com secondary false true false false
litwareinc.com primary false true false false

use the drop down list must select trhe answer choice that completes each assignment.


---you can protect [answer choice] by using dnssec:

only adatum.com
only contoso.com
only litwareinc.com
only contoso.com and adatum.com
contoso.com,adatum.com and litwareinc.com

---on server1,you configure permissions for the contoso.com zone.the permission will be efficitive on [answer choice]:

server1 only
server1 and server2 only
server1 and server3 only
server1,server2 and server3.

please find answer for this question
thank you

9 question:your network contains one active directory domain.the domain contains the servers configured as shown in the following table.

server1 domain controllers
dns server

server2 domain controllers
dns server

server3 dns server


server1 hasthe zones shown in the following table:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

adatum.com primary false false false false
contoso.com primary false true false false
litwareinc.com secondary false true false false


server3 has the following output:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

contoso.com secondary false true false false
litwareinc.com primary false true false false

use the drop down list must select trhe answer choice that completes each assignment.


---you can protect [answer choice] by using dnssec:

only adatum.com
only contoso.com
only litwareinc.com
only contoso.com and adatum.com
contoso.com,adatum.com and litwareinc.com

---on server1,you configure permissions for the contoso.com zone.the permission will be efficitive on [answer choice]:

server1 only
server1 and server2 only
server1 and server3 only
server1,server2 and server3.

@Haqqani is that a dump or what?If it is e-mail it to me please mgwenyac@gmail.com or anyone who has it please help.Thanks

Hey you ....haqqani from India.help us please which dump did you use to study because the one im having heeey......DIFI>>>>>>Calililitieee

I failed with 580 pnt. 52 questions and about 50% new of it. I really appreciate if this dump gets updated :)

@Haqqani is that a dump or what?If it is e-mail it to me please mgwenyac@gmail.com or anyone who has it please help.Thanks

Hi Examinator
Pls upload new questions...

Today i passed 746 scored... I studied aiotesking,this vce & gone through this question

I got only one new question,remaining all covered.But some wrong answer pls verify in aiotesking ..

i can't remember exact question but it is similar
You need add disk to cluster and apply bitlocker

Disk 1 NTFS with BITLOCKER ENABLE
DISK 2 FAT32
DISK 3 ReFS
DISK 4 NTFS

which to disk you prefer for cluster

Thank you guys for all of you this Q&A help alot ...Finally i Got MSA

Maybe we need Microsoft 70-412 346q Exam Dump. This is a new dump uploaded 08-Aug-2015. I'm trying to find that one.

im going next week to take m exam

guys still nothing???

There is one question and the following info:
> Replication, choose the machine and the exact time. For ex.:
Will DC1 run in three hours at 12:00 with exhibit. (Including SiteLinks)

Also 1 question with iSCSI.
> What will be the target address? fqdn1.xx.com or a few other options.
Also what needs to be done/configured before connecting? initiatorid or chapusername?

What to do after the azure signup, create:
- Backup Vault
- Enterprise Backup Vault
Few more options.

Can someone fill it in with the exact info?

hey guy we need comment please

passed today. i got 850 I studied ROD & chun & xencerra. there are new questions but didn't find ay of these published here in comment. hope good luck for those who didn't pass. Finally MCSA.

Why you stop updating comments????

3 days passed and we didn't have the new questions are you sure you published them ?? mohamed

Please update new question i planning to take exam on Saturday

When would those 21 new questions will be available? Can't you post them as a comment?

Hi everyone,yesterday i take the exam but i dont bass the exam my score is 631
many question not in the dumps
everyone need to take exam must wate

There were two questions that asked to identify where various items would be located. A file.txt is made on DC1 in the SYSVOL folder which has a global catalog then you have to mark on which of the DC's (DC1,DC2,DC3,DC4) the file would show up on and each DC indicates yes/no for if it also has a global catalog server. Then there are similar questions for if you make GPO and link it and if you make some other object... I can't remember now. Anyone seen these and know where I can study to see how it works?

This dump is not valid. Lot new questions.. More then below, do not take it with the questions posted here.

upload 21 new question today but it will take 3 days to published good luck
any one have new dumps 70-410 & 70-411 please upload it .

Q19: your network uses the 192.168.2.0/23 address space.
you are configuring video conferencing infrastructure.
you need to configure the dhcp server to lease ip address for multicast address for video conferencing.
what command should you run on the dhcp server?to answer,select the apprperiate options in the answer area

add-dhcpserverv4multicastscope -name "vc scope" -startscope

[Start Range] [End Range]
192.168.2.10 192.168.2.255
225.0.0.10 225.0.0.250
239.0.0.1 240.0.0.0
fd80:: fe80:
ff00:: ff02:

Answer: 225.0.0.10 225.0.0.250
Explanation: https://technet.microsoft.com/en-us/library/cc758554(v=ws.10).aspx

Q16: You have the following microsoft azure backup policy

backup schedule : 9:00am, 12:00 pm,11:00 pm
every day
every 1 week(s)

dslist : {datasource
datasourceid:1576400609127590137
name:c:\
filespec:filespec
filespec:c:\
isexclude:false
isrecursive:true

}

policyname : f77828d2-69b6-4c4b-b98a-e5e20d9ab7e9
retentionpolicy : retention days : 30

week1yltrsschedule :
days: monday
times: 12:00:00,
retentention weeks: 60

month1yltrschedule :
days of month : [last,monday]
times: 23:00:00
retentention weeks: 90

year1yltrschedule :
yearly schedule is not set

state : existing
policystate : valid

Answer Area:

Of the backups that are created daily at 9:00, a maximum of recovery points will be available for restore _____
- 30
- 60
- 90
- 122
- 366
- 512


if a backup is performed on monday,january 31, at 9:00,the backup will be retained for _____
- 30 days
- 60 weeks
- 90 month

I think the answer for both is 30 .

You have a server named Server1.
A Microsoft Azure Backup of Server1 is created automatically every day.
You rename Server1 to Server2. you discover that backups are no longer created in Azure.
You need to backup the server to Azure.
What should you do?

A. From the Azure Management Portal, upload the Server2 certificae as a management certificate.
B. On Server2, run the Start-OBRegistration cmdlet.
C. On Server2, run the Add-WBBackupTarget cmdlet.
D. From the Azure Management Portal, modify the configuration on the backup vault.

Answer: B (Q10 on https://azure.microsoft.com/pt-pt/documentation/articles/backup-azure-backup-faq/)




You need to verify whether a DNS response from a DNS server is signed by DNSSEC.
WHat should you run?

A. nslookup.exe
B. dnscmd.exe
C. Get-NetIPAddress
D. Resolve-DNSName

Answer: D




You network contains one Active Directory domain. The domain contains two Hyper-V hosts named Host1 and Host2 that run Windows Server 2012 R2.

Host1 contains a virtual machine named VM1.
You plan to move VM1 to Host2.
You need to generate a report that lists any configuration issues om Host2 that will prevent VM1 from being moved successfully.

Which cmdlet should you use?

A. Move-VM
B. Compare-VM
C. Test-VM
D. Debug-VM

Answer: A - Move-VM -CompatibilityReport



Your network contains One Active Directory forest named adatum.com The forest contains a single domain.
The site topology for the forest is shown in th eexhibit (Click the Exhibit button)
Each site contains one domain controller. Site link bridging is disabled.
You need to ensure that changes made to SIte1 replicate to SIte5 within one replication cycle.
What should you create?

A. a site link bridge
B. a subnet
C. a site
D. a site link

Answer: A ou D? (with link bridging disabled, site link are’nt transitive, then we may need to create a site link bridge ou a site link if there is in fact a distinct network connection between those two sites)
https://technet.microsoft.com/en-us/library/cc960573.aspx
https://technet.microsoft.com/en-us/library/cc778718%28v=ws.10%29.aspx



Your network contains two Web servers named Server1 and Server2. Both servers run WIndows Server 2012 R2.
Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster as application named App1 that is accessed by using the URL http://app1.contoso.com

You plan to perform maintenance on Server1.
You need to ensure that all new connectionerver2. The solution must not disconnect the existing connection to Server1
What should you run?

A. the Set-NlbClusterNode cmdlet
B. the nlb.exe suspend command
C. the nlb.exe stop command
D. the Suspend-NlbClusterNode cmdlet

Anwser : D (But I assume the command presented was Suspend-ClusterNode cmdlet because the other answers do not apply at all)
http://blogs.msdn.com/b/clustering/archive/2012/04/03/10290554.aspx




Q- You have a server named Server1.
Server1 is registered for online back to Microsoft Azure via Vault Backup 1 . Backup of Server1 is created automatically every day.

You have a second server named Server2.
Server2 is also registered for online back to Microsoft Azure via Vault Backup 2 . Backup of Server2 is created automatically every day.

You need to restore a datafile called data1.dat which was backed up via Server 1, on Server 2. How you should proceed?

A. From the Azure Management Portal, upload the Server2 certificae as a management certificate.
B. On Server2, run the Start-OBRegistration cmdlet.
C. On Server2, run the Add-WBBackupTarget cmdlet.
D. From the Azure Management Portal, modify the configuration on the backup vault.

Anwser : B
We need to register server2 on Vault Backup1

Just passed today 700/700. There are some new questions on Windows Azure:
1. How many daily backup can you set ? What is the maximum retetion days.
2. Backup Windows Azure on server1, how to restore on server2.

Need help.thanks

9 question:your network contains one active directory domain.the domain contains the servers configured as shown in the following table.

server1 domain controllers
dns server

server2 domain controllers
dns server

server3 dns server


server1 hasthe zones shown in the following table:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

adatum.com primary false false false false
contoso.com primary false true false false
litwareinc.com secondary false true false false


server3 has the following output:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

contoso.com secondary false true false false
litwareinc.com primary false true false false

use the drop down list must select trhe answer choice that completes each assignment.


---you can protect [answer choice] by using dnssec:

only adatum.com
only contoso.com
only litwareinc.com
only contoso.com and adatum.com
contoso.com,adatum.com and litwareinc.com

---on server1,you configure permissions for the contoso.com zone.the permission will be efficitive on [answer choice]:

server1 only
server1 and server2 only
server1 and server3 only
server1,server2 and server3.

Can you answer the following question nead help thanks
You run Get-FSRMClassificationule and you receive the following output

ClassificationMechanism : Content Classfier
ContentRegularExpression : {\d{2,}}
ContentString :
ContentStringCaseSensitive :
Description :
Disabled : False
Flags :
Lastmodified : 4/18/2015 12:59:47 AM

Name : Rule2
Namespace : {D:\}
Parameters : {FSRMClearPropertyInternal = 0}
Property : Property2
PropertyValue : Value2
ReevaluateProperty : Overwrite
PSComputerName :

ClassficationMechanism : FolderClassifier
ContentRegularExpression :
ContentString :
ContentStringCaseSensitive :
Description :
Disabled : False
Flags :
Lastmodified : 4/15/2015 9:17:16 PM
Name : Rule1
Namespace : {D:\}
Parameters : {FSRMClearPropertyInternal = 0}
Property : Property1
PropertyValue : Value1
ReevaluateProperty : Aggregate
PSComputerName :

You have a file named file1 that is stored on drive D and has the following content
“111000000000111111”
You run the classification with all of the rules

Use the drop-down menus top select the answer choice that completes each statement.


File1 has [answer choice]

Only Property1 set to value1
Only Property2 set to value2
Property1 set to value1 and property2 set to value2
Neither Property1 nor Property2 set

If you modify File1 [answer choice]

Only the value of Property1 is
Only the value of Property2 is
the value of Property1 and Property2 are
Neither the value of Property1 nor the value of Property2 is

Failed my Exam today. Got 648.
New questions. going for second shot for free.
Make sure you validate all the answered questions in the dumps as some them might be wrong.

Your network contains two Web servers named Server1 and Server2. Both servers run WIndows Server 2012 R2.
Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster as application named App1 that is accessed by using the URL http://app1.contoso.com

You plan to perform maintenance on Server1.

You need to ensure that all new connectionerver2. The solution must not disconnect the existing connection to Server1


What should you run?

A. the Set-NlbClusterNode cmdlet

B. the nlb.exe suspend command

C. the nlb.exe stop command

D. the Suspend-NlbClusterNode cmdlet

Anwser : D (But I assume the command presented was Suspend-ClusterNode cmdlet because the other answers do not apply at all)

http://blogs.msdn.com/b/clustering/archive/2012/04/03/10290554.aspx

Finely MCSA

Passed today with 7xx.
Exam is quite hard.
A lot of ADSS questions and Azure questions. Make sure to study ROD and the new questions posted. Read up as much as possible.

Good luck

Hi all, I wrote my exam yesterday which i passed and i felt i will be ungrateful if i don't share my experience with you all. The dumps alone will pull you through to almost get a pass but some of the answers are wrong which you need to work on because the new questions that showed up are not up to 15 and all the new pasted questions on here are pretty VALID because i saw them. GoodLuck to you all.

pls send us new updates ,eish we need to finish this MCSE ....le betha ka nako tooooo!

Fail 8/17/15. Got a 530. Some of the posted new question showed up on the exam but there are also a few new ones that haven't been mentioned.

Today i did the exam, but i didn't pass. I answered wrong at some questions about AD FS and from Implement business continuity and disaster recovery.
One question about azure was different, with 3 disk of wich one formatted in REFS e one disk with 1TB.
Questions from ROD's DUMP

hello, can anyone answer the new questions? i can`t find correct answer on some of the new questions below. thank you.

passed today...just...studied this dump and 70-417.v2014-12-18.by.Samuel.396q.vce (i was taking the 70-417 exam which is 70-410, 411 and 412) i however did not see any of the new questions that Peter and bopbop mention, maybe different each exam or each country. i think mastering this and the 70-417 exam should see you through.

Answer to this question

I go for C. to stop nlb.exe

http://technet.microsoft.com/en-us/library/ee817127.aspx






Your network contains two Web servers named Server1 and Server2. Both servers run WIndows Server 2012 R2.
Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster as application named App1 that is accessed by using the URL http://app1.contoso.com



You plan to perform maintenance on Server1.



You need to ensure that all new connectionerver2. The solution must not disconnect the existing connection to Server1


What should you run?

A. the Set-NlbClusterNode cmdlet

B. the nlb.exe suspend command

C. the nlb.exe stop command

D. the Suspend-NlbClusterNode cmdlet

ali from Turkey
Would you mind sharing your questions and answers???????

i'm reading Rod I ll take my exam tomorrow Rod is valid? what else to do I failed the last and want to pass please help

Today I passed exam with 850 and 20 many new questions

Answered all question ı worked myself you work hard and listen music

I learned with ROD + these Questions here,
i passed today in Switzerland with 815 ;-)
Learn the questions, and also research, if the Anwser is correct, then you should pass :)

Hi
anyone know if has new DAMP with a new questions?

some question can`t be answered by me. i need help:

8 question:

you have dhcp server named server1 that runs windows server 2012r2.
server1 has two scope production and development.
currebntly,all dhcp clients register their host name in a dns zone named contoso.com.
you need to ensure that only the clients that obtain an ip address from the development scope,register their host name in a dns zone named dev.contoso.com.
what should you do?

a. modify the advanced settings of the dhcp server.
b. run the set-dhcpserver4scope cmdlet.
c. modify the dns settings of the development scope.
d. run the add-dhcpserver4policy cmdlet.

9 question:

your network contains one active directory domain.the domain contains the servers configured as shown in the following table.

server1 domain controllers
dns server

server2 domain controllers
dns server

server3 dns server


server1 hasthe zones shown in the following table:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

adatum.com primary false false false false
contoso.com primary false true false false
litwareinc.com secondary false true false false



server3 has the following output:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

contoso.com secondary false true false false
litwareinc.com primary false true false false

use the drop down list must select trhe answer choice that completes each assignment.


---you can protect [answer choice] by using dnssec:

only adatum.com
only contoso.com
only litwareinc.com
only contoso.com and adatum.com
contoso.com,adatum.com and litwareinc.com

---on server1,you configure permissions for the contoso.com zone.the permission will be efficitive on [answer choice]:

server1 only
server1 and server2 only
server1 and server3 only
server1,server2 and server3.

failed back in Jan by one question using Rod. Taking exam tomorrow using Rod, 412 exam ref and new questions. Hope to pass. Bop bop did you pass using new questions?

failed back in Jan by one question using Rod. Taking exam tomorrow using Rod, 412 exam ref and new questions. Hope to pass. Bop bop did you pass using new questions?

Another new question I heard today. Question closely accurate in detail but not sure of the the list of answers.

Q- You have a server named Server1.
Server1 is registered for online back to Microsoft Azure via Vault Backup 1 . Backup of Server1 is created automatically every day.

You have a second server named Server2.
Server2 is also registered for online back to Microsoft Azure via Vault Backup 2 . Backup of Server2 is created automatically every day.

You need to restore a datafile called data1.dat which was backed up via Server 1, on Server 2. How you should proceed?

A. From the Azure Management Portal, upload the Server2 certificae as a management certificate.
B. On Server2, run the Start-OBRegistration cmdlet.
C. On Server2, run the Add-WBBackupTarget cmdlet.
D. From the Azure Management Portal, modify the configuration on the backup vault.

is there any new dump with new questions???

Passed 412 today. if you prepare the dump and all the new questions posted in the comments, then you are good to go.

I succeeded in my exam and I give you my experience. You must study the cbt-nuggets for windows server 2012-412 and the dumps of Peter and SA are real, find the answers and you will succeed.
Thank you to all and see you soon.

Hi can you upload the new questions with correct answers. My second shot expires in 1 week and i don't find a good dump to review new questions finded in exams. thanks a lot for your work.

IMHO the answers are:
You have a server named Server1.  A Microsoft Azure Backup of Server1 is created automatically every day. 
You rename Server1 to Server2. you discover that backups are no longer created in Azure.
You need to backup the server to Azure.
What should you do?
A. From the Azure Management Portal, upload the Server2 certificae as a management certificate.
B. On Server2, run the Start-OBRegistration cmdlet.
C. On Server2, run the Add-WBBackupTarget cmdlet.
D. From the Azure Management Portal, modify the configuration on the backup vault.
Correct answer: D

You need to verify whether a DNS response from a DNS server is signed by DNSSEC.
WHat should you run?
A. nslookup.exe
B. dnscmd.exe
C. Get-NetIPAddress
D. Resolve-DNSName

Correct answer: D

You network contains one Active Directory domain. The domain contains two Hyper-V hosts named Host1 and Host2 that run Windows Server 2012 R2.
Host1 contains a virtual machine named VM1.You plan to move VM1 to Host2.
You need to generate a report that lists any configuration issues on Host2 that will prevent VM1 from being moved successfully.
Which cmdlet should you use?
A. Move-VM
B. Compare-VM
C. Test-VM
D. Debug-VM

Correct answer: B

Your network contains One Active Directory forest named adatum.com The forest contains a single domain.
The site topology for the forest is shown in th exhibit (Click the Exhibit button) Each site contains one domain controller. Site link bridging is disabled.
You need to ensure that changes made to SIte1 replicate to SIte5 within one replication cycle.
What should you create?
A. a site link bridge
B. a subnet
C. a site
D. a site link

Correct answer: without the exhibition, im not sure. Can be A or D

Your network contains two Web servers named Server1 and Server2. Both servers run WIndows Server 2012 R2.
Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster as application named App1 that is accessed by using the URL http://app1.contoso.com. You plan to perform maintenance on Server1.
You need to ensure that all new connection server2. The solution must not disconnect the existing connection to Server1
What should you run?
A. the Set-NlbClusterNode cmdlet
B. the nlb.exe suspend command
C. the nlb.exe stop command
D. the Suspend-NlbClusterNode cmdlet

Correct answer: D

The new questions posted by Peter, Peret and bopbop are very vital. Guys lets keep the good work of posting new questions. Permit me to add that the dumps are still usefull. You can get 500 with the dumps alone.To pass you neet to master these new questions and hopefully more will come. I didnt find new questions other than the ones posted here or would have posted them.

Doing my second shot this Saturday.. studying mainly Rod and the new questions I already listed below.. will let you all know how it goes.. I think the new questions are bang on if I recall correctly.

Hi Guys,

Does anyone have VCE Designer or whatever it is you need to create VCE files? If so could we just use ROD's file and add the new questions that have been posted with the answers that most people are suggesting? Then we will have an up to date dump. I'm sure it's really that easy?

More New Questions Need the answers










You have a server named Server1.
A Microsoft Azure Backup of Server1 is created automatically every day.
You rename Server1 to Server2.
you discover that backups are no longer created in Azure.
You need to backup the server to Azure.
What should you do?

A. From the Azure Management Portal, upload the Server2 certificae as a management certificate.
B. On Server2, run the Start-OBRegistration cmdlet.
C. On Server2, run the Add-WBBackupTarget cmdlet.
D. From the Azure Management Portal, modify the configuration on the backup vault.

-------------------------------------------------------------------------------

You need to verify whether a DNS response from a DNS server is signed by DNSSEC.
WHat should you run?

A. nslookup.exe
B. dnscmd.exe
C. Get-NetIPAddress
D. Resolve-DNSName

-------------------------------------------------------------------------------

You network contains one Active Directory domain. The domain contains two Hyper-V hosts named Host1 and Host2 that run Windows Server 2012 R2.

Host1 contains a virtual machine named VM1.
You plan to move VM1 to Host2.
You need to generate a report that lists any configuration issues om Host2 that will prevent VM1 from being moved successfully.

Which cmdlet should you use?

A. Move-VM
B. Compare-VM
C. Test-VM
D. Debug-VM

-------------------------------------------------------------------------------

Your network contains One Active Directory forest named adatum.com The forest contains a single domain.
The site topology for the forest is shown in th eexhibit (Click the Exhibit button)
Each site contains one domain controller. Site link bridging is disabled.
You need to ensure that changes made to SIte1 replicate to SIte5 within one replication cycle.
What should you create?

A. a site link bridge
B. a subnet
C. a site
D. a site link


-------------------------------------------------------------------------------

Your network contains two Web servers named Server1 and Server2. Both servers run WIndows Server 2012 R2.
Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster as application named App1 that is accessed by using the URL http://app1.contoso.com



You plan to perform maintenance on Server1.



You need to ensure that all new connectionerver2. The solution must not disconnect the existing connection to Server1


What should you run?

A. the Set-NlbClusterNode cmdlet

B. the nlb.exe suspend command

C. the nlb.exe stop command

D. the Suspend-NlbClusterNode cmdlet



--------------------------------------------------------------------------------

About half the question from this dump are good so it's still worth going over.

This is one of the new questions that I remember vivdly.

Global Catalog
DC1 |contoso.com | Site1 | Yes
DC2 |constoso.com | Site2 | No
DC3 |adatum.com | Site2 | Yes
DC4 |adatum.com | Site1 | No

1. Create and place File1.txt inside SYSVOL folder on DC1
2. Create User account User1 on DC3
3. Create Group Policy GPO1 and link GPO1 to site 2

Q. Mark whether the item is replicated to the appropriate DC

File1.txt User1 GPO1
DC1 ___________|_________|________
DC2 ___________|_________|________
DC3 ___________|_________|________
DC4 ___________|_________|________

Why are my comments not posted????????????

@ashok ind Thank you for posting these questions, I'm sure you will get answers soon. Its great you managed to get the wording of these.

FWIW here are my answers to you first batch.

1: D add-clustervmmonitoreditem
Answer
The Add-ClusterVMMonitoredItem cmdlet configures monitoring for a service or an Event Tracing for Windows (ETW) event so that it is monitored on a virtual machine. If the service fails or the event occurs, then the system responds by taking an action based on the failover configuration for the virtual machine resource. For example, the configuration might specify that the virtual machine be restarted or moved to another server.
2:
I’m guessing as the only back up at 9:00 is the daily back up.
So my answers wodul be 30 and 30 days.
3.
C Set-AdDomain LastLogonReplicationInterval

4. ANSWER C,D,F (D I’m guessing as it’s the only one that makes sense)
1) Open DNS Manager.> In the console tree, right-click the applicable DNS server, then click Properties.
DNS/applicable DNS server > Click the Advanced tab.
In Server options, select the Disable recursion check box, and then click OK.

2) To disable recursion on the DNS server using a command line :
dnscmd /Config /NoRecursion {1|0}
Windows Server 2012 PS:
Set-DnsServerRecursion -Enable 0

5. 225.0.0.10 225.0.0.250
VALID MULITCAST ADDRESS IS 224.0.0.0- 239.255.255.255

Guys those are the exact questions i came across too,how did you manage to memorize those questions and answers? Or you have a new dump with those questions please HELP i'm writing this week Friday for the second time PLEASE PLEASE HELP WITH NEW DUMP.

@ashok ind

Q4, C and F are right. I dont know the third one.

Q5, 225.0.0.10 to 225.0.0.250 (The multicast ip range is 224.0.0.0 to 239.255.255.255)

All the new questions posted in comments here are valid!

Thanks @ashok and @Peter!

please help ,i need a answer for the new questions.

1 question : you have a cluster named cluster1 that contains two nodes.
both nodes run windows server 2012 r2.
cluster1 hosts a virtual machone named vm1 that runs windows server 2012 r2.
you configure a custom service on vm1 named service1.
you need to ensure that vm1 will be moved to a different node3 if service1 fails.
which comdlet should you run on cluster1?

options:
a. set-clusterresiurcedependency
b.add-clustergenericservicerole
c.enable-vmresourcemetering
d.add-clustervmmonitoreditem

2 question: you have the following microsoft azure backup policy

backup schedule : 9:00am, 12:00 pm,11:00 pm
every day
every 1 week(s)

dslist : {datasource
datasourceid:1576400609127590137
name:c:\
filespec:filespec
filespec:c:\
isexclude:false
isrecursive:true

}

policyname : f77828d2-69b6-4c4b-b98a-e5e20d9ab7e9
retentionpolicy : retention days : 30

week1yltrsschedule :
days: monday
times: 12:00:00,
retentention weeks: 60

month1yltrschedule :
days of month : [last,monday]
times: 23:00:00
retentention weeks: 90

year1yltrschedule :
yearly schedule is not set

state : existing
policystate : valid

options:
----of the backups that are created daily at 9:00, a maximum of recovery points will be available for restore:
30
60
90
122
366
512

----ifa backup is perfgormed on monday,january 31, at 9:00,the backup will be retained for:
30 days
60 weeks
90 month

3 qouestion:
Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.

Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office


for the contoso.com doamin, a company policy states that administrators must be able to retrive a list of all the users who have not logged on to the network in the last seven days from any domain controllers

What should you use?

A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom

4 question:
you havea dns server named server1 that runs windows server 2012 r2.
you need to disable recursion on server1
whatare three possible ways to achive the goal?each correct answer presents a complete solution

a: create a reverse lookup zone named 0.in-addr.arpa.
b: create a forward lookup zone named globalnames
c : from dns manager,modify the advanced properties of server1
d: from dns manager,modify the forwarders properties of server1
e: create a forward lookup zones named ""
f: run dnscmd.exe and specify the /config parameter

5 question:
your network uses the 192.168.2.0/23 address space.
you are configuring video conferencving infrastructure.
you need to configure the dhcp server to lease ip address for multicast address for video conferencing.
what command should you run on the dhcp server?to answer,select the apprperiate options in the answer area

add-dhcpserverv4multicastscope -name "vc scope"
-startscope ----------------

192.168.2.10
225.0.0.10
239.0.0.1
fd80::
ff00::



-endrange ---------------------

192.168.2.255

225.0.0.250
240.0.0.0
fe80:
ff02:


6 QUESTION:

your network contans one active directory domain named contoso.com.the domain contains two servers named server1` and server2 that run windows server 2012 r2 .
you perform daily backups of the data on server1 to microsoft azure.
you need to restore the data from the lst backup of server1 to server2.
what should you do first?

a:on server2,install the azure backup agent.
b:in the domain, add server1 to the backup operators group.
c:from the azure management portal, modify the configuration of the backup vault.
d:on server2,install the windows server backup feature.


7 question:

Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.

Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office


you need to enable universal group membership caching for the europe office and asia office sites.

What should you use?

A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom


8 question:

you have dhcp server named server1 that runs windows server 2012r2.
server1 has two scope production and development.
currebntly,all dhcp clients register their host name in a dns zone named contoso.com.
you need to ensure that only the clients that obtain an ip address from the development scope,register their host name in a dns zone named dev.contoso.com.
what should you do?

a. modify the advanced settings of the dhcp server.
b. run the set-dhcpserver4scope cmdlet.
c. modify the dns settings of the development scope.
d. run the add-dhcpserver4policy cmdlet.

9 question:

your network contains one active directory domain.the domain contains the servers configured as shown in the following table.

server1 domain controllers
dns server

server2 domain controllers
dns server

server3 dns server


server1 hasthe zones shown in the following table:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

adatum.com primary false false false false
contoso.com primary false true false false
litwareinc.com secondary false true false false



server3 has the following output:

zone name zone type Isautocreated Isdsintegrated Isreverselookupzone Issigned

contoso.com secondary false true false false
litwareinc.com primary false true false false

use the drop down list must select trhe answer choice that completes each assignment.


---you can protect [answer choice] by using dnssec:

only adatum.com
only contoso.com
only litwareinc.com
only contoso.com and adatum.com
contoso.com,adatum.com and litwareinc.com

---on server1,you configure permissions for the contoso.com zone.the permission will be efficitive on [answer choice]:

server1 only
server1 and server2 only
server1 and server3 only
server1,server2 and server3.


10 question:

your network contains an active directory domain anmed contoso.com.
the domain contains the server named server1 that runs windows server 2012r2.
server1 has the active directory rights management services server role installed.

the domain contains a domain local group named group1
you create a rights policy template named template1.
you need to ensure that all the members of group1 can use template1.

wht should you do?

a: convert the scope of group1 to universal and assign group1 the rights to template1
b: convert the scope of group1 to global and configure the email address attribute of group1.
c:configure the email address attribute of group1 and configure the email address attribute of all the users are members of group1.
d: configure the email address of all the users who are members of group1 and assign group1 the rights to template1.

11 questions:

you have a server that runs windows server 2012r2.
you create a new work folder named share1.
you need to configure share1 to meet the follwoing requirements:

*ensure that all synchronized copies of share1 are encrypted.
*ensure that clients synchronize to share1 every 30 minutes.
*ensure that share1 inherits the ntfs permissions of the parent folder.

which command should you use to achive each requirements?

to answer,drag the appropriate cmdlets to the correct requirements.each cmdlet may be used once.more than once,or not at all.
you may need to drag ther splitbacr between panes or scroll to view cmdlet?


cmdlets:

enable-synshare
new-syncdevicepolicy
new-syncshare
set-syncdevicepolicy
set-syncserversetting
set-synshare

answer area:


ensure that all synchronized copies of share1 area encrypted --------------------------
ensure that clients synchronize to share1 every 30 minutes ---------------------------
ensure that share1 inherits the ntfs permissions of the percentage ----------------------------

I remembered there are a couple of questions regarding replication between sites for domain and child domain. If File1.txt is put in SYSVOL in Server1 and User1 is created in Server2, where are the copy of objects or Files in other servers ? I can't recall exactly the question. Maybe somebody can put the complete questions

please help ,i need a answer for the new questions.

1 question : you have a cluster named cluster1 that contains two nodes.
both nodes run windows server 2012 r2.
cluster1 hosts a virtual machone named vm1 that runs windows server 2012 r2.
you configure a custom service on vm1 named service1.
you need to ensure that vm1 will be moved to a different node3 if service1 fails.
which comdlet should you run on cluster1?

options:
a. set-clusterresiurcedependency
b.add-clustergenericservicerole
c.enable-vmresourcemetering
d.add-clustervmmonitoreditem

2 question: you have the following microsoft azure backup policy

backup schedule : 9:00am, 12:00 pm,11:00 pm
every day
every 1 week(s)

dslist : {datasource
datasourceid:1576400609127590137
name:c:\
filespec:filespec
filespec:c:\
isexclude:false
isrecursive:true

}

policyname : f77828d2-69b6-4c4b-b98a-e5e20d9ab7e9
retentionpolicy : retention days : 30

week1yltrsschedule :
days: monday
times: 12:00:00,
retentention weeks: 60

month1yltrschedule :
days of month : [last,monday]
times: 23:00:00
retentention weeks: 90

year1yltrschedule :
yearly schedule is not set

state : existing
policystate : valid

options:
----of the backups that are created daily at 9:00, a maximum of recovery points will be available for restore:
30
60
90
122
366
512

----ifa backup is perfgormed on monday,january 31, at 9:00,the backup will be retained for:
30 days
60 weeks
90 month

3 qouestion:
Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.

Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office


for the contoso.com doamin, a company policy states that administrators must be able to retrive a list of all the users who have not logged on to the network in the last seven days from any domain controllers

What should you use?

A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom

4 question:
you havea dns server named server1 that runs windows server 2012 r2.
you need to disable recursion on server1
whatare three possible ways to achive the goal?each correct answer presents a complete solution

a:create a reverse lookup zone named 0.in-addr.arpa.
b:create a forward lookup zone named globalnames
c:from dns manager,modify the advanced properties of server1
d:from dns manager,modify the forwarders properties of server1
e:create a forward lookup zones named ""
f:run dnscmd.exe and specify the /config parameter

5 question:
your network uses the 192.168.2.0/23 address space.
you are configuring video conferencving infrastructure.
you need to configure the dhcp server to lease ip address for multicast address for video conferencing.
what command should you run on the dhcp server?to answer,select the apprperiate options in the answer area

add-dhcpserverv4multicastscope -name "vc scope" -startscope ---------------- 192.168.2.10 192.168.2.255
225.0.0.10 225.0.0.250
239.0.0.1 240.0.0.0
fd80:: fe80:
ff00:: ff02:

-endrange ---------------------


192.168.2.10 192.168.2.255
225.0.0.10 225.0.0.250
239.0.0.1 240.0.0.0
fd80:: fe80:
ff00:: ff02:

Guys thank you for all this help. @Joe u said u will update us once u write so how did it go?

ihmo..

Q2 G (netdom trust /selectiveauth)
Q3 B (set-adreplicationsite -identity -protectfromaccidentaldeletion)
Q4 D (We need to edit Site Link -replicationschedule, no configuration and expected to use defaultfirstsitelink)
Q5 G (netdom trust /enablesidhistory)
Q6 New/Set-ADReplicationSiteLink (no exhibits and hints, if there is no site link..we use new-adreplicationsitelink, else set-adreplicationsitelink - replicationschedule)
Q 7 A (As per my understanding, there is no site link on Site 1 and Site 3)
Q8 Site2, DC2 (S1 - 172.16.10.66/26, /26 = 63 IP address, Site 2 is located in this subnet. You be automatically redirected on DC2 on your IP addressing).
Q9 C (Get Windows Server Backup policy, check line item: [BMR: True] ..then it is supported)
Q10 C (this cmdlet resets the Application Critical state of a virtual machine)
Q11 Only Property1 set to Value1 , Neither (Unsure)
Q12 Export-VM, Import-VM (The VM1 is already shutdown, there is no way to configure powershell cmdlets and as per the question AD DC was already prepared. Export-VM on Host 1. Then Import-VM on Host 2)
Q13 C

Failed today. Around 20 questions from this dump.

2 more questions from exam I took today (adlibbing as I cannot remember the exact question):

1) Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.

Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office

You need to add an additional UPN Suffix.
What should you use?

A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom

Answer is Set-ADForest (https://technet.microsoft.com/en-us/library/dd391925(v=ws.10).aspx)



2) Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.

Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office

You need to replicate users who haven't authenticated against any domain controllers for the last 7 days.
What should you use?

A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom

Answer is Set-ADDomain (https://technet.microsoft.com/en-us/library/ee617212.aspx -LastLogonReplicationInterval)

Q1: A (Issuance Requirements is where you set what the certificate is used for)

Q3: B. Set-ADReplicationSite (Set-ADReplicationSite -ProtectedFromAccidentalDeletion $true)

Q4: D (This is the PS command that lets you set COSTS on replications between sites)

Q7: D (Seems the best way to reduce the time by reducing the cost to 100, plus the other answers look wrong and wouldnt work anyway)

Q8: Site 2 and DC3

Q9: C

Q10: C (“Resets the Application Critical state of a virtual machine, so that the virtual machine is no longer marked as being in a critical state in the cluster.”)

Q11: Only the value of Property2 is (ReevaluateProperty : Overwrite)

Q12: Host1: Command or cmdlet: New-ADDCCloneConfigFile? Host2: Command or cmdlet: Import-VM?

Q13: C

Peter, it is all of new questions already
wait answers from some one sure with right answers

I remember one that showed two certificates and the question basically said which certificate is for a standalone CA and which certificate is for an enterprise CA

Some answers from Peter:

Q 1: You have an enterprise certification authority (CA) named CA1.
You have a certificate template named UserAutoEnroll that is based on the User certificate template. Domain users are configured to autoenroll for UserAutoEnroll.
A user named User1 has an email address defined in Active Directory. A user named User2 does not have an email address defined in Active Directory.
You discover that User1 was issued a certificate based on UserAutoEnroll template automatically. A request by user2 for a certificate based on the UserAutoEnroll template fails.
You need to ensure that all users can autoenroll for certificated based on the UserAutoEnroll template.
Which setting should you configure from the properties on the UserAutoEnroll certificate template?
A. Issuance Requirements
B. Request Handling
C. Cryptography
D. Subject Name

Q:9 You have a server named Server1 that runs Windows Server 2012 R2 and uses Windows Server Backup.
You need to identify whether the backups performed on Server1 support bare metal recovery.

Which cmdlet should you run?

A. Get-OBMachineSetting
B. GetWBVSSBackupOption
C. Get-WBPolicy - For Windows Backup
D. Get-OBPolicy - For AZURE Backup

Answer: (C) Get-WBPolicy

Explanation:
Get-OBMachineSetting is for Azure Backup, question asks about Windows Backup
GetWBVSSBackupOption cmdlet doesn’t exist
Get-WBPolicy is for Windows Backup
Get-OBPolicy is for Azure Backup, question asks Windows Backup

Q:10 You have a cluster named Cluster1 that contains two nodes. Both nodes run Windows Server 2012 R2. Cluster1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You notice that VM1 is marked as being in a critical state in the cluster.
You verify that VM1 is functioning correctly.
You need to ensure that VM1 is no longer marked as being in a critical state.

Which cmdlet should you run?

A. Remove-ClusterVmMonitoredItem
B. Remove-ClusterResourceDependency
C. Reset-ClusterVMMonitoredState
D. Clear-ClusterNode

Answer: (C) Reset-ClusterVMMonitoredState

Explanation:
Remove-ClusterVmMonitoredItem actually removes the monitoring so nothing will happen

Remove-ClusterResourceDependency - self explanatory has to do with dependencies, not critical state

Reset-ClusterVMMonitoredState - This cmdlet resets the Application Critical state of a virtual machine, so that the virtual machine is no longer marked as being in a critical state in the cluster (https://technet.microsoft.com/en-us/library/hh847312(v=wps.630).aspx)

Clear-ClusterNode - This cmdlet helps ensure that the failover cluster configuration has been completely removed from a node that was evicted.

Pls guys share new dumps...412,246& 247

I went through technet to look up the following from Peter's List. The links are included to verify, read through them as well to double check my answers.

Questions missing :3, 5, 7, 8, 11, 12 . They till need vetted.
s
Q1 D. subject name
https://technet.microsoft.com/en-us/library/Cc725621(v=WS.10).aspx

Q2 G. Netdom
https://technet.microsoft.com/en-us/library/cc772217.aspx

Q4 D. Set-ADReplicationSiteLink

Q6 Set-ADReplicationSiteLink
(Specifically look up – ReplicationFrequencyinMinutes)
https://technet.microsoft.com/en-us/%5Clibrary/Hh852257(v=WPS.630).aspx

Q9 C. Get-WBPolicy
https://technet.microsoft.com/en-us/library/Ee706650.aspx

Q10 C. Reset-ClusterVMMonitoredState
https://technet.microsoft.com/en-us/%5Clibrary/Hh847312(v=WPS.630).aspx

Q13. C. Name Resolution Policy
https://technet.microsoft.com/en-us/library/Ee649182(v=WS.10).aspx

Please assist with verifying and figuring out the answers to the other questions as well.

Question 5
Answer Netdom
Qestion 9
answer c

The Get-WBPolicy cmdlet gets the current backup policy that is set for the computer. If you specify the -Editable parameter, the policy information is returned in edit mode so that it can be changed.
rest are not yet found

Question 4
Answer D
This command gets all the site links in the directory with replication frequency greater than or equal to 60 minutes, and then sets the Cost property on these site link objects to 200.
requencyInMinutes -ge 60} -Properties Cost | % {Set-ADReplicationSiteLink $_ -Cost 200}

Question 2
Answer G
ou can enable or disable an existing name suffix for routing by using the New Trust Wizard in Active Directory Domains and Trusts or by using the Netdom command-line tool. For more information about how to use the Netdom command-line tool to modify name suffix routing settings, see "Netdom.exe: Windows Domain Manager" in the Windows Server 2003 Technical Reference on the Microsoft Web site

For Question 1
Answer is Subject Name
Template properties - Subject Name tab
E-mail name. If the E-mail name field is populated in the Active Directory user object, that e-mail name will be used for user accounts.

noteNote
The e-mail name is required for user certificates. If the e-mail name is not populated for a user in AD DS, the certificate request by that user will fail

Passed on 8.1.15 with 700 in the US -- Dump is out of date as has been mentioned. There are a lot of incorrect answers, but if you memorize the heck out of the dump, verify the answers online with knowledge, and do other studying you can pull through. 412 is horribly difficult, failed 3x times before this final pass. Good luck all

@Peter that's a great help and I remember getting some of those exact questions? How did you manage to get this??.

In addition to your questions I did have few that were similar but different questions regarding site replication.

Plus Azure back up: If Server name has changed, what command do run.

Q10. What happens if I rename a Windows server that is backing up data to Azure?
A10. Any currently configured backups will be stopped. You will need to reregister the server with the backup vault and it will be considered a new server by Recovery Services:

Know the PS commands for the above.

From what Peter has posted I believe the answer to Q2 is Answer G (Netdom). Netdom is used to control name suffix routing in a cross-forest trust.

Q4 answer is D. Set-ADSiteReplicationLink. I tested this and you're able to set cost and replication interval etc in this cmdlet.

Not sure about some of the others to be honest. A lot of power shell :( My exam is tomorrow so I'll see how it goes and fill you all in.

I valid Peter Dump, for my fail second Exam

a lot of new questions, please provide new dump. thanks

failed wth 56*this dump is nologer valid in south africa,these more than 20 new questions.we need to have a new dump

These are 13 New Question, Please find the answer to help each other

Q 1: You have an enterprise certification authority (CA) named CA1.
You have a certificate template named UserAutoEnroll that is based on the User certificate template. Domain users are configured to autoenroll for UserAutoEnroll.
A user named User1 has an email address defined in Active Directory. A user named User2 does not have an email address defined in Active Directory.
You discover that User1 was issued a certificate based on UserAutoEnroll template automatically. A request by user2 for a certificate based on the UserAutoEnroll template fails.
You need to ensure that all users can autoenroll for certificated based on the UserAutoEnroll template.
Which setting should you configure from the properties on the UserAutoEnroll certificate template?
A. Issuance Requirements
B. Request Handling
C. Cryptography
D. Subject Name


Q 2: Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.

Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office


You create a trust between contoso.com and a domain in another forest at a partner company.
You need to prevent the sales.contoso.com and the manufacturing.contoso.com names from being used in authentication requests across the forest trust.

What should you use?

A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom


Q 3: Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.

Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office

You need to prevent administrators from accidently deleting any of the site in the forest.
What should you use?

A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom





Q 4: Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.

Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office

You need ensure that all Active Directory changes are replicated to all of the domain controllers in the forest within 30 minutes.
What should you use?

A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom


Q 5: Your network contains one Active Directory forest named contoso.com. the forest contains two child domains and six domain controllers. The domain controllers are configured as shown in the following table.

Name Domain Site
DC1 Contoso.com Main Office
DC2 Contoso.com Main Office
DC3 Contoso.com Europe Office
DC4 Contoso.com Asia Office
DC5 Sales.contoso.com Main Office
DC6 Manufacturiung.contoso.com Main Office


You have a trust from contoo.com to another forest named fabrikam.com.
You plan to migrate users from contodo.com to fabrikam.com.
You need to ensure that the users who migrated to fabrikam.com can continue to access shared resources in contoso.com. the solution must not require administrators to modify permissions to shared resources.

What should you use?

A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom


Q 6: your network contains one Active Directory forest named adatum.com. The forest contains a single domain.
The site topology for the forest is shown in the exhibit.

Each site contain s one domain controller.
You need to ensure that replication between site2 and site4 occurs in 15 minutes or less.
What command should you run? To answer select the appropriate options in the answer area.

Answer Area
New-AdReplicationSiteLink
New-ADReplicationLinkBridge
Set-ADReplicationConnection
Set-ADReplicationSiteLink
Set-ADReplicationSiteLinkBridge

-name

SiteLink3
SiteLink6
SiteLink1, SiteLink2

-SitesIncluded Site2, Site4 – ReplicationFrequencyinMinutes 15 –Cost

70
110
400


Q 7: your network contains one Active Directory forest named contoso.com. The forest contains a single domain. The domain contains the domain controllers is configured as shown in the following table.
Name Site
DC1 Site1
DC2 Site2
DC3 Site3
DC4 Site4

The replication topology is configured as shown in the following output.





Cost : 100
DistinguishedName : CN=SiteLink1, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink1
ObjectClass : SiteLink
ObjectGUID : e1c8c335-b75f-4612-8a9e-58a0edead21f
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}

Cost : 100
DistinguishedName : CN=SiteLink1, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink2
ObjectClass :SiteLink
ObjectGUID : 9516948e-cd56-4a9b-b6ba-cdf3dd7fe0d1
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}


Cost : 100
DistinguishedName : CN=SiteLink3, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink3
ObjectClass : SiteLink
ObjectGUID : 07a7a37e-a12c-40c4-8042-f5d2e737b8a9
ReplInterval : 60
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site3, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}


Cost : 400
DistinguishedName : CN=SiteLink4, CN=IP, CN=Inter-Site Transports, CN=Sites, CN=Configuration, Dc=Adatum, DC=com
Name : SiteLink4
ObjectClass : SiteLink
ObjectGUID : 508810dc-30fd-4845-982a-d4552fba2e04
ReplInterval : 45
SiteList : {CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com,
CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum, DC=com}

You discover that replication between Dc1 and DC3 takes a few hours.
You need to reduce the amount of time it takes to replicate Active Directory changes between DC1 and DC3.
What should you do?
A. Create a site link that connects Site1 and Site3, has a cost of 350, and replicates every 15 minutes.
B. Modify SiteLink4 to replicate every 15 minute.
C. Disable Site Link bridging.
D. Set the cost of SiteLink4 to 100.



Q 8: your network contains one Active Directory forest named contoso.com. The forest contains a single domain. The domain contains the domain controllers is configured as shown in the following table.
Name Site
DC1 Site1
DC2 Site2
DC3 Site3
DC4 Site4

The forest contains a member server named Server1. Server1 has an IP address of 172.16.10.66.
The forest has the following Active Directory subnet configuration.


DistinguishedName : CN=172.16.10.0/26, CN=subnets, CN=Sites, CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.0/26
ObjectClass : subnet
ObjectGUID : db362a6c-c0a9-4703-aaee-191083ab9ea5
Site : CN=Site1, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,

DistinguishedName : CN=172.16.10.64/26, CN=subnets, CN=Sites, CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.64/26
ObjectClass : subnet
ObjectGUID : ef101558-3afa-41f1-9c5a-717453436fc1
Site : CN=Site2, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,

DistinguishedName : CN=172.16.10.192/26, CN=subnets, CN=Sites, CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.192/26
ObjectClass : subnet
ObjectGUID : 33137047-6711-4195-940f-a463bbdab8fb
Site : CN=Site4, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,

DistinguishedName : CN=172.16.10.128/26, CN=subnets, CN=Sites, CN=Configuration,
Location Dc=Adatum, DC=com
Name : 172.16.10.128/26
ObjectClass : subnet
ObjectGUID : ef5235ab-759b-4dc8-992a-c5ec1dae97a8
Site : CN=Site3, CN=Sites, CN=Configuration, DC=Adatum, DC=Adatum,
DC=com,

Use the drop down menus to select the answer choice that complete each statement.


Answer Area

If you promote Server1 to a domain controller, its server object will be created in [answer area]
Site1
Site2
Site3
Site4


If you perform an Active Directory search from a domain member that has an IP address of 172.16.10.116, you will attempt to connect [answer area]
DC1
DC2
DC3
DC4




Q:9 You have a server named Server1 that runs Windows Server 2012 R2 and uses Windows Server Backup.
You need to identify whether the backups performed on Server1 support bare metal recovery.

Which cmdlet should you run?

A. Get-OBMachineSetting
B. GetWBVSSBackupOption
C. Get-WBPolicy
D. Get-OBPolicy


Q:10 You have a cluster named Cluster1 that contains two nodes. Both nodes run Windows Server 2012 R2. Cluster1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You notice that VM1 is marked as being in a critical state in the cluster.
You verify that VM1 is functioning correctly.
You need to ensure that VM1 is no longer marked as being in a critical state.

Which cmdlet should you run?

A. Remove-ClusterVmMonitoredItem
B. Remove-ClusterResourceDependency
C. Reset-ClusterVMMonitoredState
D. Clear-ClusterNode

Q:11 You run Get-FSRMClassificationule and you receive the following output

ClassificationMechanism : Content Classfier
ContentRegularExpression : {\d{2,}}
ContentString :
ContentStringCaseSensitive :
Description :
Disabled : False
Flags :
Lastmodified : 4/18/2015 12:59:47 AM

Name : Rule2
Namespace : {D:\}
Parameters : {FSRMClearPropertyInternal = 0}
Property : Property2
PropertyValue : Value2
ReevaluateProperty : Overwrite
PSComputerName :

ClassficationMechanism : FolderClassifier
ContentRegularExpression :
ContentString :
ContentStringCaseSensitive :
Description :
Disabled : False
Flags :
Lastmodified : 4/15/2015 9:17:16 PM
Name : Rule1
Namespace : {D:\}
Parameters : {FSRMClearPropertyInternal = 0}
Property : Property1
PropertyValue : Value1
ReevaluateProperty : Aggregate
PSComputerName :

You have a file named file1 that is stored on drive D and has the following content
“111000000000111111”
You run the classification with all of the rules
Use the drop-down menus top select the answer choice that completes each statement.


File1 has [answer choice]

Only Property1 set to value1
Only Property2 set to value2
Property1 set to value1 and property2 set to value2
Neither Property1 nor Property2 set

If you modify File1 [answer choice]

Only the value of Property1 is
Only the value of Property2 is
the value of Property1 and Property2 are
Neither the value of Property1 nor the value of Property2 is




Q:12 You network contains one Active Directory domain. The domain contains two Hyper-V Hosts named Host1 and Host2 that run Windows Server 2012 R2. Host1 contains a virtual machine named DC5. DC5 is a domain controller that run Windows Server 2012 R2.
You configure Active Directory to support domain controller cloning for DC5, and then you shut down DC5.
You need to create a clone of DC5 on Host2
What should you run on each Hyper-V Host.? To answer Drag the appropriate commands or cmdlets to the correct Hyper-V hosts. Each command or cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.



Command and cmdlets

Export-VM
Import-VM
Move-VM
New-ADDCCloneConfigFile


Answer Area

Host1: Command or cmdlet
Host2: Command or cmdlet


Q: 13 You network contains one Active Directory domain named adatum.com. The domain contains a DNS server named Server1 that runs Windows Server 2012 R2. All domain computers use Server1 for DNS.
You sign adatum.com by using DNSSEC.
You need to configure the domain computers to validate DNS responses for adatum.com records.
What should you configure in Group Policy?

A. Network List Manager Policies
B. Network Access Protection (NAP)
C. Name Resolution Policy
D. Public Key Policy

Guys please stop posting comments like 'i did not pass' or passing points
Better not to write anything then useless comments
Big thanks to Titansvol and Crushers

Which one this dump is correct according to you guys.

Joe thank you, that the grace of God be with you and come back to us with questions please.

there are a lot of new questions, please upload new dump..thanks

What is the cmdlet to prevent accidentally deleting in site.
There is a question that speaks to this, please post if you find your answer

Thanks all. I looked them up on technet, but wanted to know what others were using. Also saw a question with diagram for to Intersite links and one Intrasite link with a schedule diagram.As I have read intersite can be scheduled and the intrasite happen at replication time that is set up in diagram, due to high speed on local network.

Good day guys,

Any one have an idea when the new dumps will be available,i'm writing 413 and 414 in Mid-August?

@titansvol you can check through powershell and type get-help set-adgroup -full to give you explanation on how to use the command or check technet article on their usage.
you also type get-command set-AD* to give you all possible commands that start with set-AD

I used TechNet to research. ESPECIALLY Active Directory Infrastructure PowerShell commands!!!! Get to know the following commands: Set-ADsite, Set-ADObject, Get-ADReplication(and its various options). With the above info I rekon would have passed. There is around 15-20 ish questions you might recognise, some with slightly reworded answers. If you have revised you will know the right answers for those ones. As far as the Premium dump goes, I doubt its been updated to include the new questions. If anyone else can remember some questions please post them.

questiond 3-10 are still valid

I saw all of the Topics Crusher saw on my test. Does anyone know of a place to review Set-AD* commands? The * meaning ADGROUP, ADSITE, ADOBJECT ect...

Is the premium dump valid? Considering it if i have to.

Dump is not valid. Lots of new questions.

Writing somewhere in the Middle East. Better believe Microsoft is monitoring this forum.

Thanks Crusher for posting some of the new points. I am sitting my exam next week on the 5th August 2015. I will post a comment including all of the new material that I see to help everyone out. Please post new categories that you come across in the exams!

dump is still valid?

I agree John, you have to post the latest issues. If everyone does it will come out.

Questions I got asked that werbt in these dumps were a LOT of Powershell Commands for:
RODC Replication
CA Enrolment, Key recovery Agents.
AD Site replication
Azure Backups
Cloning RODC's
Failover Clustering

New date, same garbage! Less than one half of these questions are valid and some of the answers are wrong!

Hi everyone, why not help ourselves by talking about the new questions that surfaced. probably that might help those that are yet to write the exam to know where to focus on. Thanks

Hi everyone, instead of complaining about new questions, cant we just help ourselves by posting some of the new questions we saw while taking the exam to help others who haven't taken their's yet. Because i have seen the same thing being done in the 410, 411 and 417 section thanks..

Many new questions ~25-30 of 51. Pass with 700)). Moscow, Russian Federation.

anyone have the new test

No longer valid. Saw 2 questions from top 3 dumps. USA

Hi guys, unfortunelly this dump is not valid, some answers are wrong and missed a lot of questions

guys, some new questions and wrong answers, need new dumps! Thanks!

hello
friends,
Almost all of the questions have changed
my entered third exam , last score:597

I failed today 23 july 2015, I got 648. I studied wendy, ROD and viper. New Azure and backup file questions,wait for new dumps before you write.

DUMP NOT VALID AT ALL
Failed today 567 more than 40% new questions on all dumps here
, missing azure backup etc
Missing almost 10 questions about forest,replica,sites management with cmdlets
Missing one multicast question (You have to prepare network ipv4 for videoconference ecc...)

Failed,18 of 49 is new question in the exam.

not valid in UK. 50% new questions. most others re-worded with different answers

Please there are new issues since July 11, 2015. Even if you do not have the answers present us so we can look, please.

Failed in the 400's, this dumps are not valid.

Please help i reserved the exam next week i want any dump to help me???

anybody used the new premium dumps?

Failed with 683.

Not valid. Exam today in Barcelona (16/07/2015) finally not pass with 565 points. A lot of new questions, studied with Rod , Snowden and Vida. None of them is valid.

Failed Horribly today in South Africa. Knew dumps inside out. a whole lot of new questions. Probably about 5 out of the 51 were from the dumps I studied. this is not good...

Failed. A lot of new questions about ADFS and DHCP

Bad dump. I failed today with a 4XX :( Lots of Powershell. Only about 20 questions from this dump and those were reworded with different answers.